i'm going to do a fresh install and was wondering, what program i can use to compress and save my data. right now i only have a 2 gig flash drive. i have around 4 gigs of info i need 2 save.
View 7 RepliesMy system ubuntu 10.04 crashed. Now I boot from liveCD and I can�t mount HDD.
fdisk �l give partitions, but mount does not work. Crashed system should be on sda1 and it is ext4. code...
I can not boot into ubuntu anymore, I have a kernel problem. Is it possible to save the stored data? Maybe with a livecd? I am really tired to solve the kernel problem I will only save my data and then I will install ubuntu again.
View 5 Replies View RelatedI have an ASUS 900a with a 4GB SSD running Ubuntu NBR 9.10. It has several accounts and associated data on it. How do I save the accounts and data as I upgrade the SSD? I have an 8GB USB drive, an external HHD, and an external DVD burner available. I suspect that clonezilla will be part of the answer, but I don't know how to put the pieces together.
View 9 Replies View RelatedCan not save data to external usb hard drive
formated and mounted on Ubuntu 9.10
visible on desktop /Dev/Sdb1
I have here a Fujitsu-Siemens laptop with Windows Vista on it. The graphical chip of this laptop is damaged in such a way that during boot I can see texts but once the GUI starts it is over. No more picture. This happens with Vista, but also when I boot a live-cd from Ubuntu.The owner of this laptop, not me, wants to buy a new one but would like all data to be saved.I have downloaded the server version of Ubuntu 10.04 (so I stay in text mode) and with the CD I can boot into restore mode. There it is possible to mount the internal hard-disk, after which I can see the data.
But... how do I get it from the disc? How do I setup the network, which I believe is running already, to make the laptop a part of my home network? Now from other computers I can't see this laptop, and I have no idea how to see my computers from this laptop.Or is it possible to burn a CD/DVD in Restore mode. If so how do I do that?
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
i want to use tshark to save captured data i want it to save it in a certain directory and every x seconds and 5 files so every x seconds Tshark saves another 5 files
View 2 Replies View RelatedI have created a file using open() and written data to it. Data appears as normal characters in the file. How to save these characters in a binary format in that file using C language? Here I mean that the characters should be actually stored as 0 and 1. Do I have to convert the whole data using some function or there is some standard way to do it in Linux?
View 14 Replies View Relateduse fedora system, and installed fedora 12 on my usb disk by live-usb creator.Now, the problem is everytime i reboot the computer, the user data and software i installed will disappear.When installing, i choose persistent space which is described for user data and software, but it seems not work now.What can i do if i want my fedora on usb disk is just like the system installed on hard disk
View 1 Replies View RelatedI managed to damage my 11.2 installation so it starts in the GUI mode only in failsafe mode. Actually I tried before to repair the installation, using the install DVD, but the automatic repair procedure failed. More than that, since then boot loader also seams to be "repaired" so that the Windows installation doesn't appear in the boot menu, but this is another thing.For me, now, the fastest way to get a stable system is to make a new installation. The biggest problem is that I cannot save/backup the emails and accounts settings in an elegant way. I'm using Thunderbird. Of course I would also like to save other apps settings.So is there a way to save user application settings so that I can used them after a new install? I had a look to the yast backup tool but these seams to be a way to archive files, or am I wrong?
View 9 Replies View RelatedI have a Windows laptop that isn't booting up anymore for some reason Safe Mode doesn't even work. Looking at what is printed out when it hangs, I did a search on google and it is some sort of HP laptop problem. Apparently the hard drive should still be OK, if only I can access it somehow. I was thinking maybe I could use one of those live Linux CDs to boot up. But I'm not too familiar with those. Would they be able to detect the laptop's DVD burner, and allow me to burn files off the NTFS partition to a blank DVD? I want to get my data off before I hand the laptop over to the IT department - who knows what they will do to it. So exactly which live Linux CD flavor should I use (my other working computer only has a CD burner)? And then would it be easy to burn a DVD after booting up the live Linux CD?
View 1 Replies View RelatedI wanna learn how to store data in text file and be able to modify it and save as well using C++.
Note: im using Turbo C++ 3.0
Used gparted to format a brand new iomega prestige 1 tb usb hard drive (ntfs) to ext4. The problem is that I can't create folders from nautilus because I don't have permission (root). There is one folder present already lost + found that appeared after reformatting. i can't access that folder because of permissions. Was any of this supposed to happen after formatting an external drive and how can I fix this? I intend to use grsync to back up important folders but can't create folders from grsync also. The only account on ubuntu is mine and i have access to root privileges.
View 9 Replies View RelatedI want to buy another laptop. I want to use FC on it. I need bluray because I want to save data on bluray disks of 25 gb (better than dvds, more space). I have one option, a fujitsu that has bluray writer, big display (I have another one, other model, same size and it's working fine with Fc14, only some small issues).
Second option is a Dell (I had an older dell inspiron before, which worked fine with FC), more expensive, lacking a writer, but it can read bluray. If I take this, I would have to also buy an external bluray writer. Has nice specs, but I am really worried about the graphic card, whether I can make it work with Fc14. I saw some people having problems with linux and this graphic card, while searching on google.
Here's specs for both (sorry for the language from website, but I found in English other specs than these, I guess the specs can be read easily): Dell XPS L702x and FUJITSU Lifebook NH570 I am inclining more towards the Fujitsu, but haven't decided yet.
i have custom programs written in Basis pro5. Standard output to a pdf virtual printer works fine. Using pdftk to overlay on to a form is hit or miss.... There are products out there like Unform that are just too expensive for my company. i have purchased another product from a company that prints the forms to the laser perfectly but i am incapable of capturing them and saving them as pdf's for archiving/emailing/faxing and i don't much care for this company.
View 2 Replies View RelatedOur application uses a dynamically loaded shared object library (codec library) to compress and decompress audio streams.
There happens to be several static and global variables in this shared object library. Hence it is not possible to process two interleaved unrelated media streams using this shared object codec library because each stream corrupts/changes the contents of these static/global variables.
Is there a way through which a context save (save contents of data segment of shared object) and a context load (load previously saved contents of data segment of shared object)operation can be performed on the shared object library. This way the context for each media stream can be saved and loaded before and after processing the "other" media stream respectively.
I have a 500GB Hitachi external hard drive that I use for backup. It's about 17 months old and has barely been used. Two partitions reside on it: a 446.2GB ext4 partition I use for backup and an LVM partition that contains an NTFS partition and another ext4 partition.
I started it and connected it to my laptop today (after not using for 4 months). A libnotify message warned that "drive failure [was] expected in less than 24 hours." Palimpset shows "Reallocated Sector Count" with status "FAILING" and value "343 sectors" and "Current Pending Sector Count" with value "1556" and status "FAILING". At first I figured it was just the self-check being programmed for NTFS only (not unheard of). But then I saw that Palimpset has the Linux partition labelled as "unrecognized". The temperature is normal (about 20�C). What's going on here?I have not mounted the drive yet and the data is largely unimportant, so I'm more concerned about the hardware (even though hardware damage seems the unlikely possibility). To prevent or minimize hardware damage, what would my best course of action be?
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies View RelatedAfter a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I'm running Win XP 64 bit and ubuntu 9.10 as a dual boot. I also have the CD for Ubuntu 10.04. My question is, I want to do a fresh install and would prefer it to install over 9.10. Is this what will happen or will it want to install as a 3 way boot??
View 2 Replies View RelatedI installed ubuntu some weeks ago, then had to install compiz and other stuff like nvidia-current myself...now when i do a fresh install, it's there which means some files are saved.. how do i stop that, and make a 100% fresh install?
View 3 Replies View RelatedI just performed my first (successful?) Ubuntu installation. The installation process seemed to go fine, and I selected "Ubuntu Desktop" when asked which set of packages I wanted to install. I assumed this was a standard choice.
After the installation finished, the system rebooted and brought me to a login prompt.I'll mention at this point that I have SOME prior experience with Linux systems, but I'm by no means an expert, and I'm new to Ubuntu. I logged in and tried startx, only to be informed that it was not installed. Having performed a network install, I have internet access on the machine, so I tried "sudo apt-get install xinit" which seemed to work, but now when I run startx, my window shrinks to a portion of my monitor size, the colours invert (black prompt on a white background) and the system locks up. I'm assuming this is some sort of video driver issue, and could probably explore further, but I figured I'd ask some experts first.
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies View RelatedI just installed ubuntu 9.10 on my computer and it just freezes without me doing anything.If i open my computer and leave it like that it will freeze after 5 mins or so.
View 8 Replies View RelatedI upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.
I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better
I messed up an install of Ubuntu (tis all part of the learning process) and I was wondering if I could install a fresh copy over the top of the old one?Would it remove everything like themes, programs and drivers and stuff?
View 9 Replies View Related