Ubuntu Installation :: Exporting LATEST Updates (deltas) To File?
Sep 20, 2010
I have Alienvault (which is debian based) running on an offline network. I need to have a repo server on that network in order to provide updates/other installation sources. Currently I have configured Ubuntu Server 10.04 as an apt-mirror on an internet-connected network.
What I need to do is find a way to automatically take the newest updates, and export them to disk. I need to mirror the internet-connected-repo server on the offline-network side. But I don't want to burn all 40 gigs or so every time new updates come out. Basically, I'd like to perform incremental backups of the mirror after the first full backup. Is it possible to automate this daily?
A first for me with Ubuntu. The system has hung. Well almost hung.
After installing the latest automatic updates - I'm sorry, I don't know how to identify which ones they were, but it was on 29 January 2010 - when selecting almost any application the system almost hangs. By almost hangs, I mean, the cursor will move very slightly once every 10 seconds or so, but even if it can be manipulated to a certain point, no action can be taken.
The only way out of this situation that I have been able to find is a hard reboot. (I was used to this type of thing with Windows XP, but had never seen it before with Ubuntu).
Reverting to Ubuntu Linux 2.6.31-17-genereic-PAE at the GRUB boot up option screen solves the problem.
Any suggestions on what might be happening, how to fix it, or if it is even worth bothering with? It is working just fine (so far) on the older generic-PAE.
Ubuntu has been great and it is a great Linux distro. Unfortunately, the update of 9.10 desktop edition to release 10.4 failed on a couple of fronts.
1) Xserver is no longer working; 2) An upgrade of grub-pc causes an exception.
The system ran perfectly before the update was performed. The update resulted in Attempting to install GRUB to a partition instead of MBR. This is a BAD idea. usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and is use is discouraged.
Based on information found at [URL]... an attempt was made to execute the following command. sudo aptitude dist-upgrade But that resulted in E: dpkg was interrupted, you must manually run sudo dpkg configure ato correct the problem The later launches an upgrade of grub-pc. This routine requests the selection of which devices are to be used to store grub-install. When that was done ... GRUB failed to install to the followed devices: /dev/sdb1 /dev/sdc1 /dev/sdd4
Do you want to continue anyway? If you do, your computer may not start up properly. GRUB installation failed. Continue? Questions: 1) Can / should the upgrade of grub-pc be bypassed in order to get the system running? 2) If not, what values should be selected when selecting the devices to store grub-install? 3)Because the computer is a RAID configuration, would someone advise are there special considerations which should be considered? 4) Once grub-pc is resolved or bypassed, should the commands found in the aforementioned article be used to repair xserver. 5) Are there additional measures which will be needed to in order to complete the update to release 10.4?
Here are some helpful details on the system configuration
The computer has four disk drives using RAID 1 and RAID 5.In the following configuration RAID5 Device #0 750.2 GB Sotfware RAID device #1 750.2 GB ext4 SCSI1 (0,0,0) (sda) 320.1 GB ATA WDC WD3200AAKS-2 #4 primary 250.1 GB K raid #3 primary 16.0 GB F swap
1. Which XFCE on install. dvd Fedora 12? 4.4, 4.6? 2. Can I download installation dvd with latest updates? 3. Is it possible to see content of installation dvd Fedora 12?
On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?
I'm going to be doing some field testing of Ubuntu for compatibility on various laptops. I'd like to have a USB stick containing the latest kernel, drivers, packages, etc. I already have one prepared with the 10.10 release, but there have been many updates since then and no 10.10.1 release thus far.
Is it possible to update my existing flash drive to the latest and greatest...using the software update tool while booted using the drive? ...from within an existing Ubuntu 10.10 installation? .manually?
I have installed Ubuntu 11.04 32-bit on my new desktop. After installation all gone well.
The initial upgrades after fresh installation also ran well and I was able to reboot and use the system successfully.This was before three-days.Yesterday night I ran again the Update Manager and installed the available (4-5) updates and then I installed Sun-Java-JDK using Synaptic Package Manager using the packages from the canonical partners.
After installation was done I shut down the system and in the morning when I restarted the system the login screen is coming up but on entering the login credentials a black screen with some text(unable to see the text) flashes and returns me back to login screen.I tried logging in with both normal and admin type users.But admin type user too encounters the same problem.
I have partitioned my 500GB into 5 partitions and there is sufficient data on each partition.
I assume fresh installation would fix it and the data on logical partitions would be intact but doing this re-installation would require me to install the updates again and do all the settings I did till now again.
I have installed ubuntu 10.04 64 bit in April and it has worked flawlessly. However, today I ws prompted to install Kernel updates. Now when I try to boot it continually cycles between a black screen and the NVIDIA logo.
Yes I have been using the nvidia drivers previously but without incident till now.
I have tried crtl-alt-f1 but this does not stop the cycling.
I have noticed in the recent updates there is a Kernel update 2.6.32-22 but there is no restricted modules included. On my Desktop I have a Nvidia card which I installed the driver using the Hardware Drivers Application. As far as I know these Drivers are ether reinstalled or updated whenever there is a kernel update.
I also have a Laptop with a ATI Radeon card which I did run the updates and ended up (after the reboot) in low graphics mode, after a bit of work I was able to reinstall the drivers and get my desktop back so that's ok now.
I had this problem a few years ago with an old version of Ubuntu, kernel updates but no restricted drivers. The drivers turned up the next day and all was fine. I was just wandering if this is a known issue with Lucid or if anyone else has had this problem, It's been a couple of days since I noticed the Kernel update but still Restricted Modules. Oh I'm using Ubuntu Lucid 10.04
If I go to the website and download the ISO file is it the exact same one that was released in April or will it contain the latest patches (e.g. security fixes, etc) that have been release since then? If it doesn't I suppose I'll have to download the entire ISO file, install the OS, and then have another couple hundred MB to download which is not what I'd prefer.
I have an MSI U100 Winbook with Ubuntu Workstation 10.04 LTS newly installed (about 4 days ago).
The update manager displayed about 15 or so updates for my 10.04 installation which I installed. Upon reboot, I can not successfully login to the desktop. It will take my username/password, the screen will go black for a couple of seconds, then the error sound, and back to the login dialogue.
A tail on /var/log/messages displays:
atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0) atkbd.c: Use 'setkeycodes e077 <keycode>; to make it known. composit sync not supported
These messages keep repeating. I am able to login at the console just fine. I have enabled root login but get the same issues logging in as root. I have googled and found several articles and postings involving these messages but they are all in reference to upgrading from 9.x to 10.04. I did not upgrade and did not experience the freezing of applications as noted in those posts.
I had sound before but after one of the latest updates the sound quit working. I read other threads and they suggested to type. Code: alsamixer on terminal. I did that and unmute everything and pumped each setting to the highest possible. When I boot the laptop again everything is muted, How can I save settings or what other solutions are there for this problem.
I'm trying to setup a small network between my old and new laptops to transfer my personal data. They are now linked with a crossover cable and they see each other.The old one has a dual-boot setup with WinXp and Ubuntu 9.10.The new one with Win7 and Ubuntu 9.10.I tried samba but it was very slow even using Windows in both computers: maximum transfer rates were about 1,5 Mib/sec.I tried SSH using ubuntu on both pcs and it is reliable and much faster, 5 Mib/sec. But I wanted more...I installed the NFS server on the old one and exported the NTFS partition where my data resides with sync and ro options.
I installed the NFS client on the new one and i'm able to mount the remote partition.Now, when I transfer my files I get very high speed, more than 10 Mib/sec but after a while I get a "Stale NFS file handler" error but I really didn't touch any file in the old pc and the connection is always up.Searching on the web I found that NFS had some troubles exporting NTFS partitions in the past but should be fully compatible with them since the last versions of ubuntu.
I've been running Maverick 64bit fine on my Dell M1330 laptop until a couple of days ago. After the latest updates (I guess to kernel 2.6.35-24-generic), sound stopped working properly. The sound indicator applet tells me that the sound system is not responding. The login sound doesn't play anymore.
On the other hand Rhythmbox plays and I can hear the music. I can adjust Rhythmbox volume but not the global volume (as neither the sound indicator applet nor the multimedia volume keys on my laptop work).
Code: $alsamixer it works flawless. Here is what I get if I try to run pulseaudio from the terminal
Code: $ pulseaudio E: module-ladspa-sink.c: Master sink not found E: module.c: Failed to load module "module-ladspa-sink" (argument: "sink_name=ladspa_output.mbeq_1197.mbeq
I installed ubuntu 10 just yesterday. Everything was working just fine. The auto-update function advised me to download and install the latest updates and so I did. It was over 300 MB. I installed it, did a reboot and my internet connection was lost. I tried a few things I found on this forum yesterday. Nothing worked. I can go on-line on the same computer using windows 7. But I always have to reboot to try the different solutions. All right that's fixed! But now I just have to fix Firefox...
I've got a problem when i try apt-get update I get the following in the report: Failed to fetch http://ftp.uk.debian.org/debian/dist...86/Packages.gz 404 Not Found Failed to fetch http://ftp.uk.debian.org/debian/dist...rce/Sources.gz 404 Not Found R
Consider the following scenario: you have two disks that are kept synchronized by some method. Could be RAID, could be LVM snapshots, could be a script. However, something has gone wrong. The disks are out-of-sync and you don't know which disk received which updates. You want to manually re-sync the disks but how do you figure-out which file to copy where?
I'm thinking of saving recursive directory-listings of the entire disks to text-files. Sorting them on last-update and removing all identical entries from the files.
I have a feeling that this is something that can be done with just a few command's but I need some help to get me started.
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
So, it's 2010 and I already though I got rid of coding my own drivers & compiling my own kernel in normal use... After installing latest Fedora 14 updates, my system won't boot anymore into fedora. Just continuous loop no matter if I select previous kernel system won't boot.
Anyone any ideas? I think it might be ATI driver but not 100% sure since I didn't see any D/A related or Kernel updates wasn't upcoming...
Anyways I will figure out this sooner or later but this kind of updates sucks a bit that your system goes suddenly totally unuseable or system won't reboot, sooo , time to move on with an another distro or is Fedora just RedHat's playaground?
openSuse 11.4 + Gnome 3 (upgraded from oneclick install). A couple of ago I ran zypper update and there were some updates available for chromium (and a few other things). I installed them, did some work in libreoffice (dint use chromium then) and turned the computer off. Today I needed to do some web surfing, so boot up my computer, launch chromium and get the following message (I translated it from spanish as I use the spanish version of opensuse)...
Failed to launch <<Chromium web browser>> Failure executing child process <<chromium>> (The specified file or folder doesn't exists) Before the "update" chromium worked perfectly. Now it doesn't even start.
After the latest round of updates approx Sep 10, sound has stopped working. (I rarely need sound for anything so it took a while to notice.) In Yast :: Hardware :: Sound it lists all of the devices that were previously defined.
- 0: SBx00 Azalia (Intel HDA) - 1: RS780 Azalia controller - 2: Logitech USB headset - 3: USB Audio
Yet when I go to Gnome :: Control Center :: Hardware :: Sound and select the tab Hardware, nothing is listed. I suspect this is why there is no sound. How do I go about reloading the hardware into the hardware listing?
We are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated ---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
I presently dual boot with Vista Home Premium and Ubuntu 10.04 LTS. Since the installation of Ubuntu about 8 months ago, my Grub menu at boot up shows all the updates for Ubuntu 2.6.32-24, -25 and -26. How can I eliminate the first two and only leave the latest update?
After not having used Ubuntu for a few months now, I want to make up a new LiveCD and possibly a bootable USB. The times I have done this in the past, the installations don't include recent updates which need to be downloaded and installed once the system is running. (Understandably)
Two questions:
1) Does Ubuntu update the downloadable ISO periodically to include recent updates?
...for example: Now that it is January (ie. some 3 months after release of Karmic in October '09 and some 200-300Meg+ of updates required since that time), will I be downloading an ISO from Ubuntu that has recent updates already as part of it, or will it still require updates to be downloaded and installed once Ubuntu is running on the computer?
2) If the downloadable ISO has not been updated since Oct '09, is there a way of making a LiveCD/bootable USB that has up-to-date updates already installed? (if you know what I mean?) ....and is this process relatively simple?
I'm doing custom minimal OpenSUSE installation and trying to export detailed list of chosen software in yast on USB (FAT32) drive, but cannot locate the drive itself. It definitely is recognized by SUSE, since i can see it in partitioning section, but after that i just can't find it in yast (mnt, media,...).Is there any other way to mount/recognize the drive, because i just don't have any other idea how to backup that chosen software list?
