I have recently upgraded my OS from Lenny to Squeeze.The new setup boots, but sent a "Warning" message during the upgrade - which said:The reference to "/dev/hdb" (the Hard Disk that has my Linux OSs) in "/etc/lilo.conf" is deprecated.The full text of my entry currently reads:boot=/dev/hdb.So what should the entry read to conform with the new Debian policy?
View 11 Replies
I am running Kubuntu 10.04 and as part of the registration process for connecting to my college residences network, I have to download and run one of thosese retarded Bradford Dissolvable Agent, it is a bin file and when I execute it I get: :~$ sudo sh Bradford_Dissolvable_Agent.bin Bradford_Dissolvable_Agent.bin: 92: kdalog: not found Bradford_Dissolvable_Agent.bin :: Unable to read policy Now you can ignore the fact it says kdalog instead of kdialog, examining the bin file in kate shows it's just a typo.
I'm not entirely sure what to do regarding kdialog, I assume it is installed (it's there in /usr/bin/), does anyone have any idea how to troubleshoot this further, Here is the first 100 or so lines of the script if anyone wants to take a look:
[Code]....
I have learned how to create an Ethernet over GRE tunnel using the following command example :"ip add link eth1 type gretap remote a.b.c.d local w.x.y.z" (available since 2.6.28). (1) Is there a corresponding RFC ? I cannot find any standard e.g. RFC which this conforms to, for example RFC 1701, 1702, etc. (2) Do standard routers (e.g. Cisco, Juniper) terminate this protocol or is it strictly Linux-to-Linux? If so, can someone identify the command line syntax or topic to search for, i.e. what do the vendors call it?
View 3 Replies View RelatedI am trying to mount a smb share on an ubuntu machine and for the life of me I can't figure out the fstab entry. The server is running fine and the windows machines can map their shares fine, I just cant figure out the fstab entry for an ubuntu box.at this point the fstab looks like this(although I have tried many variations)
Code:
//server/path/share /path/mount/point smbfs credentials=/root/.credentials, uid=1000, gid=1000 0 0
[code]....
when i starting the server..it is coming to maintenence mode and saying repair file system...because /home1 was not found in /etc/fstab.. when i tried to remove the entry from fstab for /home..it is read only!!
View 5 Replies View RelatedI'm using Debian Squeeze.
When I invoke apt-cache policy , for example , apt-cache policy zlib1g.
I get the output like:
Code:
And below the line "Version table:" , there is installed package version. I assume 1:1.2.3.4.dfsg-3 is version("epoch"+"upstream version"+"debian revision"), but what does the next "0" means?
I'm having trouble to configure my debian (2.6.26-2-686) with some routing tuning. In fact, I have a VPN provider. I want my Squid Proxy use this VPN provider and I have to use policy routing because my ISP forbid IP spoofing.
View 2 Replies View RelatedI just wanted to ask about official opinion or policy concerning newer versions of KDE. Is 4.6 still so buggy or unstable to be included in experimental? What steps are going to be made concerning KDE and what when? I don't like GNOME, KDE 3.5 is out of the game now in 6.0 and KDE 4.4 is IMHO all but mature and finished. So I am not sure what to do now, Kubuntu is buggy and don't like it but they have 4.6...
View 2 Replies View RelatedI'm intending to replace my current router (486DX2 w/16MB running FREESCO which has been faithfully working 24/7 for well over a decade) with a debian box with a bit more grunt and newer features. I'm currently setting up my iptables ruleset and am after a bit of advice re the FORWARD policy. A few example rulesets I have found set the default policy to DROP and the have two lines for each port forward, one to allow the traffic and one to direct the incoming packets to the correct machine.
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 25 -j DNAT --to-destination 10.0.100.10:25
iptables -A FORWARD -i eth1 -p tcp --dport 25 -o eth0 -d 10.0.100.10 -m conntrack --ctstate NEW -j ACCEPT
I'm thinking of setting the default policy to ACCEPT to cut down on typing as my default INPUT policy is DROP and unless there is a valid FORWARD rule for a particular port, the packets aren't going anywhere anyway. Or have I misunderstood something. My googling returned heaps of example scripts & not much intelligent commentary. Alternatively, what do you all use to configure & maintain your debian gateways; hand rolled iptables rules, or any toolset recommendations?
After a system update a couple of days back - which as far as I can remember included some xorg packages - neither of the policy files I have written for my keyboard, synaptics touchpad and mouse work.Below are the files and the Xorg log file.
99-x11-keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
[code]...
I have searched all over the net and i just can't find out how to "link" read command to zenity entry.An excerpt of my script:
Code:
echo "Insert the location of URL:"
read lokacija
[code]....
Iceweasel told me "Your Websense policy blocks this page at all times". How can I disable websense in Iceweasel?
View 4 Replies View RelatedI've got Debian Sid x64 on my machine. Problem is that in my KDE setup several programs don't work, namely System Load Viewer plasmoid, plasmoid with temperature info and update-notifier-kde. System Load Viewer always shows 0% RAM and swap usage, as well as no processors, temperature sensors plasmoid shows no sensors available even after I installed lm-sensors and run sensors-detect, update-notifier-kde doesn't show any notifications even if I run aptitude update manualy. I might be mistaken but it seems to me that these three programs are not working because of some common reason, most likely some policy package either missing or misconfigured, but I can't figure out what is it.
View 4 Replies View RelatedWhenever I run $aptitude update I get this error :-
W: Duplicate sources.list entry http://ftp.us.debian.org/debian/ stable/non-free amd64 Packages (/var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_non-free_binary-amd64_Packages)
W: You may want to run apt-get update to correct these problems
[code]....
Question: Installation had me entering my password many times, seemed like for most everything I did during install & setting up the desktops. It was a little frustrating compared to what I was used to with Ubuntu. I know this frequency will reduce once settled in although Linux and "fiddling" go together so some will continue. When using Ubuntu I was able to set that up to bypass some password need, not all. I was hoping there are options for that with Debian but my efforts all day yesterday failed to find any. I am not looking to eliminate password use entirely and I don't expect it to be just like Ubuntu either, however...
My main areas of frequent password use that are new to me with Debian Squeeze are:
1)All partition mounting. Using Ubuntu I edited fstab using a tool called "Storage Device Manager" so that only myself, not "users", had full read-write access to all partitions at boot time. However, none of those fstab codes or any new ones that I tried seemed to work in Squeeze. Besides Squeeze, I have two ntfs and one ext3 partition to access. Example: my music files are on an ntfs partition and I have to enter a password to listen to music.
2)Opening a root nautilus folder. In Ubuntu I made a custom application launcher with "gksu nautilus" and that gives you a no-password one-click access. In Squeeze, I enter a password every time.
3)Reboot & Shutdown. This one surprised me. Every reboot or shutdown requires my password unless I logout first but that adds a step. It may have something to do with a second desktop I installed (kde), I'm not sure. I tried making a script linked to an application launcher that runs "init 0" but that asked for my password too.
I'd like to be able to do 1,2 & 3 above without password entry other than maybe at the main log-in.
About me: This is my first post here, and am trying to be courteous. I checked the DebWiki, Google & this forum for answers. I found a little about ntfs partitions and saved it to a file. My situation is a Debian beginner but using Ubuntu for 7 or 8 months. My technical skills are mid-range. I use Debian on a newer dell laptop with Intel chipset and Intel CPU, triple booting Windows 7, Ubuntu 10.10 and Debian-Sqeeze-di-rc1-amd64. I installed using DVD #1, and made a local repository with DVD 1&2 and added a second kde desktop. Gnome Debian is my favorite now, it runs very well and will probably replace Ubuntu as my primary OS. Everything works that I can tell, except the Software Sources GUI does not load but I go into the source.list file and edit it manually.
I have a Dell Latitude E6410 which I can boot from an Iomega external hard drive when I want to run Linux on it. It is a work issued Windows XP laptop and when I travel, I am more comfortable with Linux, so I created a dual boot option without touching their hardware. The external hard drive plugs in to the USB ports and the BIOS picks it up as the primary boot media, although the internal drive is still present. (That is the desired outcome).The problem is that the system periodically locks up solid and only a forced power off will get it to respond. The system seems to go into a kernel panic and fails to write anything before dying. The system completely locks up and stops responding to mouse and keyboard. It also seems to drop off the network. When I look at the logs after restarting, nothing at all shows up related to a kernel panic or anything else. To further complicate the diagnosis, on the reboots, sometimes the boot process locks up at "Starting GDM3", sometimes it doesn't, and wont for several attempts but eventually will boot to gnome. Some times it runs fine for a few hours, sometimes for only a few minutes. Can anyone recommend a way to diagnose this?I am trying to run Debian 6.0 32-bit with the defaults.
View 8 Replies View RelatedI compiled QLWM window manager but it's not in GDM's session menu. How do i add it there?
View 1 Replies View RelatedHow to auto entry the X window (xfce 4) on debian 6 base system. I install Debian 6 only Base system, then install xfce4 use:
apt-get install xfce4
I can type "startx" entry the xfce4. I want auto entry the xfce X window, when the computer is started. How can I do it?
I have just installed Debian and the installation went smooth (net installation). The last prompt was to specify if you want to be able to boot 3 different OS's using grub. I answered yes (I have Win7, Ubuntu and now wanted to install Debian for testing purposes). Is there any way I could manually add entry to grub for booting Debian, for instance from Ubuntu adding to menu.lst?
View 2 Replies View RelatedTrying to install Debian Sid in VMWareplayer....
Got image debian-testing-amd64-netinst.iso from : [url]
Following happens :
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View RelatedI down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.
Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?
I have the following error on one of my servers. Is there a way to tell which directory is exactly having the problem? if there is, if i delete that directory, will that resolve the problem or no?kernel: EXT2-fs error (device md(9,0)): ext2_check_page: bad entry in directory #10158084: unaligned directory entry - offset=0, inode=605471640, rec_len=7606, name_len=177
View 4 Replies View RelatedI have in /etc/selinux/config:
Code:
SELINUX=enforcing
SELINUXTYPE=mls
Do I have MLS enabled? I can't use Selinux commands. I thought MLS is sort of package to Selinux. I fallowed this:
Code:
[code].....
I just installed Firestarter on Ubuntu 9.10 64 bit. When I go to the "Policy" tab I cannot add a new rule. The buttons on the tool bar are grayed out. Same with the Policy menu items.
Never mind. I just found that by clicking in the empty area below "Allow connections from host" the + button becomes enabled.
I am trying to prepare my PowerEdge 2950 before CentOS 5.3 installation(web server). I have hardware RAID 1/10 so I will have 2 virtual disks(VD).
First VDRAID 1) - 2 physical disks
Second VDRAID 10) - 4 physical disks
What should be write policy for the VD(RAID 1) and for the VD(RAID 10)? I would have "/var" and maybe "/tmp" on RAID 10.
It took me a while to get VNC going. It was easier with FC8-10. Once I got finished and was actually able to log in and see my remote desktop I tried to add some software... virtualbox.When I double click on the RPM I get popup that states."The action could not be completed. Failed to install file. You do not have the necessary privileges to perform this action" When I close that dialogue another one pops up that states" "The action could not be completed." When I click on more details the dialogue states. "Policykit authorization failure" How can I make this work?
View 1 Replies View RelatedFC12 with recent updates The bugzilla I reported is fixed in selinux 3.6.32-66 and I have 3.6.32-56. I refreshed the repositories and looked for 66 and it is not listed. Question - how often does the policy changes get posted to the repositories ? And are the repositories the normal place to get the latest and greatest ?
View 2 Replies View RelatedI need to change SELinux policy to permissive and then back to enforced for an installation. I understand that I should be able to do that through the SELinux Administration window accessed through System -> Administration ->SELinux Management. But I do not have any real sysadmin tools available in my Fedora 15 Gnome Gui interface. Am I missing something, or should I use some sort of similar command line tool to do this?
View 2 Replies View RelatedI try to configure account lock out after 5 failed connections attempt with help of PAM. I add the following string to /etc/pam.d/login:account required pam_tally.so per_user deny=5 ulock_time=180 no_magic_root reset.Unfortunatly this solution doesn`t work. Can you give me advice how to set 5 connection attempt, block user and unlock account after 180 seconds?
View 2 Replies View Related
