I am just about to set up squid3. I was expecting to find squid.pid at /var/run but there is nothing there. I then searched for a squid pid at any location but nothing was found.
I ran dpkg -s squid3 and all appears to be well but I seem to be missing a file.
Does anyone know where the pid is located?
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI need to setup a squid 3 proxy with https bumping. Unfortunately I'm not very familiar with squid and https in general.
I already perfomed the following steps:
1.) compile from source
Code: Select all./configure --with-openssl --enable-ssl-crtd
make
make install
2.) configuration (http)
I used this guide: [URL]
3.) configuration (https)
[URL]
The server is now working for http and https, but is the server secure, too? Is the default config already secure or do I need to configure additional security features? (e.g. things like cert validation, cert pinning, [dont know what's importend], ...)
I'm having trouble to configure my debian (2.6.26-2-686) with some routing tuning. In fact, I have a VPN provider. I want my Squid Proxy use this VPN provider and I have to use policy routing because my ISP forbid IP spoofing.
View 2 Replies View RelatedI am having problems while testing out squid proxy server. I just can't get it block anything. So, I'm running Debian lenny on my Virtualbox and Squid on it. I'm having windows 7 on virtualbox too and they can ping each other and the webserver on debian (apache2) is working fine. The problem is i can't get squid to block webpages. I have the correct settings on windows proxy settings, but i'm not so sure about squid. I want to block lets say www . xxx. com for example. So I add to the main configuration file:
[Code]...
Can squid do 'fair bandwidth sharing' ? What i mean is, if there is 1 user online on a 4mg line, that user will be using the entire 4mg line speed, and if there are 2 users online, each user will have 2mg line speed, and so on. I have squid cache set up already, but i just need to know how bandwidth distribution/sharing can be handled Can squid also be used to limit/disconnect users after they have used up their allotted bandwidth? [I have a mikrotik router connected to the adsl (for wireless users)]
View 1 Replies View RelatedI'm trying to get https/443 traffic go through squid.
View 3 Replies View RelatedI'm running a squid server on debian lenny with ntlm_auth.
Everything is working good after following those two tutorials : [url] and [url]
As all was working perfectly i decided to rebbot my server, and after reboot the ntlm-auth was not working anymore.
When i tried to run the command "wbinfo" with many options i had this error message "error looking up domain users" or"error looking up domain group" so i think that the problem deals with winbind module.
I know that proxy user needs rights and that after reboot the rights are reseted, so this problem doesn't come from here.
And when i try to open IE with a client i have this "cache accesss denied" because the ntlm_auth wasn't done.
I tried to restart all services (samba,winbind,squid) without any success, only the "kinit" command is still working...
What is going on with winbind when the server is rebooted ?
I have installed debian to run Squid cache as a caching proxy.
Ive been bashing away now for 2 days and i have managed to install squid (i first tried manually, but that did not work so i used synaptic software packager to install it (from Administration menu)
That went well, thereafter i installed webamin to work with squid in a GUI
I have managed to start squid and added my range of IP addresses to the ACL list
I have added the proxy restriction too.
Now, i tried to test it.
I opened Iceweasel Web browser (on the same machine) and setit to use the Proxy server: localhost and port:3128
That works fine.
But when i try to change the proxy setting to my machines ip (where squid is installed) :
Proxy server: 10.0.0.35 and port:3128
That does not work.
Am i missing something, please help
I then tried to set another windows PC on the network to:
Proxy server: 10.0.0.35 and port:3128
That also does not work.
I also edited the conf file to http_access allow all, but i do not know if i have doen it correctly, but maybe there is another problem?
I got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
Im using squid3.0 stable25 in fedora11 RAM512MB, and have 25 users. Problm is it uses full ram after about 30 minutes from booting.. when i upgraded it to 1GB the whole 1GB is using after some time... i think its due to caching of squid, how to disable it?
View 6 Replies View RelatedI'm testing using RHEL 5 and Squid 2.6.STABLE6, with using 2 NIC which is 192.168.1.200 (ETH0/INTERNET) and 192.168.3.1 (ETH1/LAN). I already setup my DNS in /etc/resolv.conf !
- When I put ETH1-off ETH0-on, I could connect to internet, but when i put ETH1-on ETH0-on, I couldn't connect to internet. Why ? Did i should route the traffic from ETH1 to ETH0 and vice versa ?
- I follow each step in this link and edit line :
Code:
acl intranet src 192.168.3.0/24
, and also put this command in iptables :
Code:
iptables -t nat -A PREROUTING -i eth0 -p tcp dport 80 -j REDIRECT to-port 3128
I'm looking to set-up a squid server. Are there any good tutorials out there for this?
View 1 Replies View RelatedI have the following ACL setup,
Code:
acl whitelist dstdomain "/etc/squid3/whitelist"
acl badURL url_regex "/etc/squid3/websites"
acl badURL url_regex "/etc/squid3/blockdownload"
[Code].....
I have tried many times for squid proxy cache server on10.10.But invain.
View 3 Replies View RelatedI was trying to configure squid 3.1 on fedora linux 13. It's working perfectly fine from the local host but unable to browse from local network even after configuring acl for local network.
Connectivity diagram is given below
Local Network (windowsXP clients) --> Squid Server --> Firewall--> Internet
(192.168.102.0/24) (192.168.102.25)
Linux server has only one network card which is configured with internal IP. Configured client browser with proxy address (192.168.102.24 and port 312.
Have any web interface for squid 2.6 proxy server ?
View 2 Replies View Relatedi m using squid for internet sharing, i am facing problem while accessing public ftp, therer is no problem in accessing local ftp, but if try to access public ftp like ftp://125.125.20.2 i am getting error
' An FTP authentication failure occurred while trying to retrieve the URL: ftp://125.125.20.3/
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.'
if i try to access local ftp ' ftp://10.185.200.12' getting no error
What is the command for installing squid?
Which distribution is needed? linux server?
i want to setup squid proxy server at my home. my service provider has ISA server install on its machine. in windows as a client we have to enter proxy settings manually to IE and firefox. but now in squid where i have to define to use this proxy settings. and what about /etc/resolv.conf . my service provider's connection settings are stated as under.:
IP ADDR= 192.168.1.x
subnet mask=255.255.255.0
Proxy= 192.168.1.1 port= 8080
I'm looking for VPS provider in the US. I'm just trying to get around geo-location restrictions and I figured that the easiest way would be to get a cheap VPS and set up squid. (I'm planning on sharing it with a few friends) Anybody has any experience with any VPS providers?
View 2 Replies View RelatedI'm trying to configure a squid server on CentOS 5.4.
It's really good but I think is there any squid alternative.
Is there any software like squid?
what is the acl type is used to bypass a website where to implement the rule?
View 3 Replies View RelatedHow to install squid 3.1 on centos 5? I found something that convinces me. default "yum install" I installed the version 2.6 of squid. What happens?
View 4 Replies View RelatedI have installed squid 2.7 and squidguard from OpenSuse repositories,and I use "redirect_program /usr/sbin/squidGuard -c /etc/squidguard.conf -d" in /etc/squid/squid.conf,but seems that the squidguard is not started after restart squid,
however,when I initialize the blacklist by "squidguard -C all",the cursor keeps blinking for quite a long time,what should I do
I have installed dansguardian and squid on my home computer and I need to configure them. the only problem I couldn't find any manual only one for opensuse 9. And even there the part after "acl CONNECT method CONNECT" doesn't make any sense to me.
View 1 Replies View Relatedi need squid proxy on my centos server. But i just can't get it to work. I did yum install squid. Here is my squid.conf file (i removed all comments):
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
[code].....
I have a VPS. I intend to use it as a squid server. I need to know how to configure Squid so it works as a simple proxy server. Don't need authenication etc.
View 1 Replies View Related