I was trying to configure squid 3.1 on fedora linux 13. It's working perfectly fine from the local host but unable to browse from local network even after configuring acl for local network.
Connectivity diagram is given below
Local Network (windowsXP clients) --> Squid Server --> Firewall--> Internet
(192.168.102.0/24) (192.168.102.25)
Linux server has only one network card which is configured with internal IP. Configured client browser with proxy address (192.168.102.24 and port 312.
I have installed dansguardian and squid on my home computer and I need to configure them. the only problem I couldn't find any manual only one for opensuse 9. And even there the part after "acl CONNECT method CONNECT" doesn't make any sense to me.
I have installed squid and dansguardian on my server, I also setup my iptables to forward port 80 communication to port 3128 (squid). I also have remove the comment on /etc/dansguardian/dansguardianf1.conf (line "bannedextensionlist") hoping that my server would block download. But it isn't, it still download file no matter I add in /etc/dansguardian/lists/bannedextensionlist. Oh yeah, I also add this line to my /etc/squid/squid.conf
I am trying to learn DansGuardian for content filtering, but for some reasons it is NOT working for me. equest is directly getting routed to SQUID, it should come first to DansGuardian and then to SQUID.I have created the below scenario on CENTOS 5.5 boxes.
Code: 192.168.0.10box1.test.comYUM/HTTP SERVER 192.168.0.20box2.test.comYUM/HTTP CLIENT, SQUID SERVER
Need a bit of help from the linux community. Lately, I have been trying to configure squid as transparent proxy on my server running on RHEL5. I had gone through few articles on web abt how to configure it and configured squid accordingly adding http_accel_xyz settings and then configuring the NAT using iptables. But while restarting squid there were warnings about "unrecognized: http_accel_..." in parseConfigFile.What I could get from these is that probably I need to recompile squid adding transparent proxy support. I downloaded the new squid 3.0 and tried to compile it.But unfortunately, the 'make' command fails giving library errors.I have been stuck with t now as the new squid does not compile and old one does not support the transparent mode.could compile the new one and what supporting libraries do I need to compile it successfully and also from where can
My network is: ISP --> SonicWALL--> Proxy --> LAN Currently Sonicwall is running VPN, DHCP, port forwarding etc.. in a range of 10.0.0.0/24 and I have tried to configure Squid Proxy for content filtering (using squid 3 Transparent mode on Fedora 10 and Iptables). Now I need to implement the proxy over my network without changing the SonicWALL current settings (VPN, Port forwarding and DHCP).
I would like to install and configure Transparent squid proxy on a gateway server ,but i dont have a local OR intranet DNS server.I am facing issues do that ,regard .My IP series is 192.168.1.1/24
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
I have installed fedora-ds-1.0.4-1.FC6.x86_64.opt.rpm on RHEL 5 Enterprise, which I use for Oracle BIEE. Now I need to install the FDS in another RHEL 5 and mirror only the FDS.
configure the mirroring part for the Fedora Directory Server.
I create a shell file with different commands . I am able to execute it manually . Now I want to schedule this file hourly . For this where I place this file and where I configure for time .
where to customize the modules thing? I've always used Ubuntu and there was an asoundconf file where I could change these settings.Haven't been able to find the same sort of thing on Fedora. A lot of people say I should either edit the /etc/modprobe.conf file which is now deprecated and does not exist on my computer, or edit some alsa file under /etc/modprobe.d/ which i don't have either.I've installed all of the alsa packages through yum.
I am using Fedora 14 x86_64 (KDE 4.5.5) OS on my home desktop. I tried installing KVM (default virtual machine available in the anaconda installer). I find the performance of virtual machine too slow. For instance - installation of windows XP 32 bit took around 4 hours to complete and booting windows xp takes somewhere around 3 minutes. PCBSD installation took around 14 hours and booting PCBSD is taking around 5 minutes. The base operating system i.e.Fedora is blazingly fast. After spending some time in google search , I found few posts saying such sluggishness could be due to not enabling virtualization option in BIOS. I searched my BIOS menu, my level best, but could not find any such option available.I use intel E7400 core 2 duo processor with 4 GB DDR2 RAM. I use nvidia GEForce 7100/nForce 630i/PCI mother board and graphics card. I have installed nvidia proprietary video drivers from rpmfusion. Following is the output from hardware lister (lshw) for the CPU -
CPU /0/4 product: Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz vendor: Intel Corp.
[code].....
I also tried visiting the BIOS manufacturers website, and found that there are no firmware upgrades available. So I wanted to know is there any way I can speed up my virtualisation or should try some other solution like virtualbox etc.
I have managed to install java, flash and acrobat plugins but haven't been able to make Firefox play wmv, wmp files. I am following instructions from myguides.net website and when I search for test player on google at the webpage PluginDoc: Windows Media Player Plugin Test Player (XP/Vista) and it doesn't work.
In windows i set up ip address , subnet mask , default gateway , Preferred DNS server and alternate DNS server , how do i do that in linux and where.. I have fedora 7 secondary OS that i sue for work...
I have to go through an ERP projects. "README" file to setup the software gives following instruction which I have attached with this thread.So, according to first step I copied the entire "dolibarr-2.6.1" folder in "/usr/local/apache2". But whenever I call the browser with address given in "README" file my browser gives the following error message : Code: Firefox can't establish a connection to the server at localhost.Please let me know how can I configure the Web Server so that I can use the software.
I have Redhat 5.5 and want to configure my TP-LINK TL-WN321G 54Mbps USB Wireless Lan card with it. when i plugged my TP-LINK TL-WN321G 54Mbps USB Wireless Lan card into my system my /sbin/lspci is
Where i should start configuring with? when i plugges this in my windows machine. it works fine
I have a Apache web server and a separate tomcat 5 server. I can run the jsp-exaples just fine using HTTP. However using HTTPS fails. For some reason it appears HTTPS is not forwarding to the connector, I get 404 not found, returned.If I simply try https://apache_server_ip I successfully connect to the default Apache page.According to this page it should just work. Apache should do the ssl encryption/decryption and tomcat operate as normal.
i have to work at my home in my office. For that purpose i use a laptop with Windows (i really don't know why) XP. As i moved to Fedora 10 i want to make the same thing in Fedora.. Really don't know how. i have a cable connection and a router at my home ( i posted another message mentioning the fact of my wireless connection).
At my office i have a router , a firewall and 2 servers that i am allowed to use and i have to work on them (one is an AS/400 from IBM).
I've tried both the firewall interface that comes with Fedora and Firestarter, neither can configure as I want. So I think I'm going to have to do it by hand. In this laptop I have one 10/100 Nic and one wifi connection, at times either of them can be connected to the network. How can I configure IPtables so that any traffic is allowed out, nothing is allowed in (other than std stateful firewall replies), no icmp and that the fw logs any attempts to connect to the laptop?
I want to configure the Huawei E220 modem I recently bought in Fedora 10. I read lot of detail documents in the internet. All were interesting and explaining the wvdial.conf file. The problem I have is that, the file asks for the phone # to dial, username & a password. I don't have these information since my ISP didn't provide those. It works perfectly in Windows, in which above information are not needed, because when plugged in Windows, a software installation launches, which does the job to connect to the internet. So, is there a way to configure the modem to connect to the internet without those information. Because my ISP refuses to provide those, when I called there customer services.
