Debian :: Run 'apt-get -f Install' - Get Hung Up With Errors On Samba
Aug 9, 2010
My computer was getting slow. I know I had a problem with flash for sure. I was thinking it was because I haven't done a dist-upgrade in a while and there were a lot of updates.
So last night I backed up all my important data and did a dist-upgrade. Well now IceWM no longer shows and it just boots to command line. Not the first time I've done that.
Anyway, when I run 'apt-get -f install' I get hung up with errors on Samba.
Errors were encountered : /var/cache/XXX...samba_2%3a3.4.8~dfsg-2_i386.deb
I tried to remove samba but was unable to and 'dpkg -r --force-all samba' returns a processing error.
The error states that it can't locate File/Temp.pm in @INC.
I am sure someone with more knowledge could easily salvage this. Funny, I have been running sid for 5-7 years now and it has given me very few problems. And pretty much every problem has originated from my hand. Typing the wrong thing, accepting the wrong option, or accidentally deleting the wrong folder.
View 2 Replies
ADVERTISEMENT
Sep 24, 2015
I have setup a samba Active Directory PDC to essentially eliminate the cost of using a Windows PDC. There are other reasons but I won't go into those now.
So everything works fine apart from a couple of things that are bugs in samba until 4.2 which isn't stable yet on debian (so I read).
The one thing that doesn't work is users trying to change their passwords. I can change them from either the PDC or through Windows users and groups. If a user tries to change it they will get the message:
"Mutual Authentication Failed. The server's password is out of date at the domain controller".
The packages I have installed and configured are:
samba
smbclient
smbldap-tools
ntp
krb5-user
krb5-admin-server
winbind
I provisioned the domain using samba-tool domain provision, i have configured kerberos and users can log in fine....it is simply changing passwords that are the issue. I am not sure if this is a samba config issue or where it is. I would hate to have to fall back to a Windows PDC.
Below is my samba config, the [domain] is of course an actual domain on the server.
Samba Config:
# Global parameters
[global]
workgroup = [domain short]
realm =[domain]
netbios name = BILBO
server role = active directory domain controller
[Code] .....
View 0 Replies
View Related
Mar 6, 2010
i was adding another disk to my raid 5, all was going well it started the reshape, got past the critical zone, worked for 20mins, but now it seems to have crashed.When i cat /proc/mdstat, or mdadm -D /dev/md0, those programes hang and dont print anything or return.from my kern.log i can see that there was an error on a disk, the raid array removed it, was going to continue the reshape but finished immediately. Anyone know what i should do?
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: reshape of RAID array md0
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: using maximum available idle IO bandwidth (but not more
[code]....
View 2 Replies
View Related
May 24, 2011
I have Squeeze with 2.6.32 kernel, fresh installation and Intel 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device.I have done all updates, but Gnome Desktop freezes every day completely, I can move the mouse, but nothing happens.Keyboard works, but I can press only Ctrl-Atl-F1 and Ctrl-Alt-Del to reboot.
May 23 20:19:56 Squeeze kernel: [ 644.868007] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
May 23 20:19:56 Squeeze kernel: [ 644.868018] render error detected, EIR: 0x00000000
May 23 20:19:56 Squeeze kernel: [ 644.868724] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 8250 at 8249)
View 10 Replies
View Related
Jul 16, 2015
I use debian 8 and sometime when I install some packages I see these errors
Code: Select allProcessing triggers for shared-mime-info (1.3-1) ...
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Processing triggers for man-db (2.7.0.2-5)
but app or packages installed
View 1 Replies
View Related
Jul 29, 2011
So I recently purchased a Linux Virtual server and I've got everything configured pretty much except for PHP5 for Apache. I keep getting this error when trying apt-get install php5 and apt-get update:
[Code]...
I checked my sources.list file and it's setup correctly, and I even added ftp.us.debian.org but it's still not working.I'm pretty familiar with Linux and can't figure this one out. The server is connected to the internet as I can access my websites from the internet and SSH into the server, and the firewall is configured to allow SSH, HTTP, and FTP. I believe apt uses HTTP and FTP so it shouldn't be blocking anything.
View 1 Replies
View Related
Aug 8, 2010
I've been trying on new installation for opensuse 11.3 on Intel P55 raid5 configured system, one non-raid disk for boot device, a raid5 array as data device. However, installation always gets hung on Searching Linux partition step and I was able to see the vgscan process was the last command to run. Is it a known bug? Does anyone have the same issue as mine?
View 5 Replies
View Related
Aug 31, 2010
I'm trying to install uzbl and was following the step by step guide on this page http://xanderboy.esdebian.org/36949/uzb ... orts-flash
When i run make i get a lot of errors and warnings. Can anybody point out what I'm doing wrong?
here's what I get code...
View 14 Replies
View Related
Jul 11, 2011
I'm using Debian Wheezy on amd64 using the binary nVidia drivers from the Debian repository. When I started up my computer yesterday, everything worked fine. Then I started installing a bunch of updates going back a week since I had it turned off for a week. This seems to have messed with my nVidia drivers. I could run GNOME at 1080p just fine, but I couldn't run prboom-plus or glxgears since they would give me errors about not being able to find a screen. Strangely enough, Wine could run both Proun and Bulletstorm without a problem.
I looked at synaptic and tried to install nvidia-glx to solve my driver problems, but it gave me an error about not having the correct version of libgl1-nvidia-glx. I try installing that and it wants to remove 140 programs first! Of course I refuse to let it do so. Then I figure it might have to do with some other program that these programs are dependent on. So I check the package dependencies and lo and behold, they all require libgl1-mesa-glx. I try removing that and synaptic also says that I have to remove those 140 programs with it. I give up and try playing the Half-Life 2 demo via Wine. When it hangs I restart my computer. However, while rebooting, I got this nice error message from X that said that apparently I don't have any nVidia drivers anymore.
I would prefer not to use sgfxi to do driver updates. One of the reasons I switched to the repository's drivers is because I was tired of having to reinstall my drivers every time there was a kernel update in testing.
Tried using vesa in xorg.conf, it also didn't work. Detailed X output said something about being able to find a screen but it wasn't usable.
View 1 Replies
View Related
Oct 3, 2014
Was I the only one having failure issues trying to install any Debian ISO Yesterday?I got big red screens about corrupt files all while trying to install Wheezy and Jessie.All with ISO versions downloaded and burned yesterday, net install. Disc and DVD.Mint and later Fedora installed perfectly well, but I wanted Debian.
View 1 Replies
View Related
Jan 20, 2010
In process of installing gnome have hit an error wall from dpkg too many errors. Tried increasing the allowed errors in dpkg.cfg to 150 and still get the errors. The errors now come up on any apt-get install.
ADDED: sent the output to file and the errors start with python2.5-minimal(2,5,43).
View 3 Replies
View Related
Nov 28, 2015
I am trying to instsal Gnome. While installing, 'gnome-getting-started-docs' fails. This is not a critical package, and I would like to see gnome installation / setup continue.
Is it possible with some command line options? I've tried 'apt-get -f install' 'apt-get -m install gnome' and various combinations thereof.
(Error I see is 'dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt).
View 4 Replies
View Related
Mar 9, 2011
opensuse v11.3 linux 2.6.34.7-0.7-desktop x86_64
These message have started appearing the system logs </var/log/messages and /var/log/warn> since Mar 2, 2011. They seem to occur about every 13 minutes (780 seconds). What could it mean? Is it serious?
Code:
Mar 9 20:15:50 sma-station14l smbd[3711]: [2011/03/09 20:15:50.196387, 0] smbd/server.c:281(remove_child_pid)
Mar 9 20:15:50 sma-station14l smbd[3711]: Could not find child 10046 -- ignoring
Mar 9 20:28:50 sma-station14l smbd[3711]: [2011/03/09 20:28:50.885876, 0] smbd/server.c:281(remove_child_pid)
Mar 9 20:28:50 sma-station14l smbd[3711]: Could not find child 10326 -- ignoring
View 7 Replies
View Related
Jun 22, 2011
I changed the password on my samba server and now I cannot mount the share anymore from my Windows 7 box. The logs shows no errors whatsoever about authentication, is that normal? I remember from a long time ago that I never saw samba do that and it has made troubleshooting very difficult.
I changed the password with the smbpasswd wanuser command the samba version is 3.2.5
here my samba.cfg file
[global]
server string = asdfadf
log file = /var/log/samba/%m
panic action = /usr/share/samba/panic-action %d
[Code].....
When I crank up the log level, samba shows lots and lots of totally irrelevant messages like connected and disconnected, but not why it got disconnected. On the Windows 7 machine, I get an error that the user and password is not correct. Why does Samba not report it?
View 3 Replies
View Related
Apr 26, 2011
We have a Debian Linux Server with Samba setup. It connects to our lab computers each night to pull new data over. It's worked great for several years. Over the last month or two it has randomly been getting Samba errors (13663, 13668, 13673, 13683, 13693, etc). I don't know if those numbers mean anything because they are all different. Usually after rebooting it would be fixed, but it seems to be getting more frequent.
View 1 Replies
View Related
Dec 14, 2010
I have a samba file server that has Windows XP machines connecting to it. Fairly regularly, I get messages such as the following. Are these anything to worry about? What do they mean? Nobody ever has problems with disconnecting or losing their mapped drive or their desktop shortcut not working.
Code:
Nov 15 15:37:21 servername smbd[27516]: [2010/11/15 15:37:21, 0] lib/util_sock.c:read_socket_data(384)
Nov 15 15:37:21 servername smbd[27516]: read_socket_data: recv failure for 4. Error = No route to host
[code]....
View 5 Replies
View Related
Sep 14, 2010
I often see DBus errors when I unmount network shares (samba). In every instance, they unmount fine. In every instance, I notice no weirdness. Yet these errors randomly come up. There's no pattern to it whatsoever.
View 1 Replies
View Related
Sep 13, 2010
I get the following errors when installing samba.
slutb0x:/etc/samba# aptitude install samba-dbg
The following NEW packages will be installed:
samba{a} samba-dbg
0 packages upgraded, 2 newly installed, 0 to remove and 1 not upgraded.Need to get 49.2MB/55.5MB of archives. After unpacking 149MB will be used.Do you want to continue?
[code]...
View 5 Replies
View Related
Jul 10, 2010
I am stuck on the "Retrieving file" step of my initial Ubuntu install on a 12GB drive at 79% saying "Retrieving file 13 of 28". I have not been able to install Ubuntu because of this reason.
View 9 Replies
View Related
May 14, 2011
This is what I get:
Code:
root@Jason-Lin:/# apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
This is a fresh 11.04 install. I grabbed a couple of the basics (alternate browsers, media players, etcetera) but other than that I haven't made any modifications or installed any strange packages.
Code:
root@Jason-Lin:/# uname -a
Linux Jason-Lin 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux
View 5 Replies
View Related
May 22, 2011
Downloaded and copied to a usb pen drive the latest debian testing snapshot netinstall iso:
wget url
then
dd if=debian-testing-amd64-netinst.iso of=/dev/sdb
Everything went fine, even the install part.After the 1st boot, problems started. I've never seen so much errors after a first install and probably they are all reported.
1. ata_id[297]: HDIO_GET_IDENTITY failed for '/dev/sdb'
2. mkdir: cannot create directory `/run/udev/rules.d/': Read-only file system
3. startpar: service(s) returned failure: udev ... failed!
4. INIT: Id "co" respawning too fast: disabled for 5 minutes
5. eth0 doesn't automatically start; one has to start it via ifup eth0
After that, installed a minimal xserver-xorg-core, xserver-xorg-video-radeon and kde-plasma-desktop.
I'm unable to use the newly DE environment, the screen just freezes, I'm guessing because of the udev error.
I have to restart via Magic SysRQ key:
Alt+PrtScr+S > Alt+PrtScr+U > Alt+PrtScr+B
View 4 Replies
View Related
Aug 25, 2009
Does anybody know if there is a quick and easy way to simply disable samba security to avoid "Access Denied" errors when trying to access shares via Windows XP?
View 2 Replies
View Related
Nov 17, 2010
My problem is laptop is always hung what can i do?
View 4 Replies
View Related
Apr 10, 2011
If khungtaskd stopped a hung process is there any way to know what that task was? I.e. does khungtaskd leave any kind of log record?
Or any other way to find out if a task hung.
View 7 Replies
View Related
Jan 22, 2010
I recently installed Ubuntu on my computer, and today after hooking up the internet for the first time it asked me to update. I clicked install, then restarted the computer.
While booting up it hangs up after the following is displayed:
fsck from util-linux-ng 2.16
/dev/sda1: clean, 149460/2400256 files, 984175/9582764 blocks
I've tried ctrl-alt-delete, it restarts, asks me how I want to reboot, and whether I choose generic or recovery mode it still hangs up here. What can I do to be able to access my computer again.
View 5 Replies
View Related
Jun 13, 2010
my mother woke up and came in here to get online and when I hit her name on the sign in screen its just stuck with her name on the screen So she woke up me and I hit CANCEL SIGN IN and now its stuck on CANCELING..... And its been like that for 10 min I am too scared to do ctrl alt backspace because its going to log me off of everything
View 1 Replies
View Related
Oct 31, 2010
I upgraded a machine this morning from 9.04 to 9.10 and it went off without a hitch. I then began another upgrade from 9.10 to 10.04 and it appears to have hung. Everything worked fine up through getting new packages, but when installing the upgrades; it got to Unpacking replacement javascript-common ... it opened a terminal window and stopped. It still says about 20 minutes remaining but it's been saying that for about half an hour. Is there any way I can get it to resume? What do I do now?
View 3 Replies
View Related
Feb 11, 2010
Hello, im running ubuntu 9.10 on my laptop and im trying to make a win xp vbox and when it gets to the part where is is creating the virtual hard drive (30GB in my case) it just stays at 0%. I left it running last night and went to bed, in the morning it was still at 0%. Now iv just tryd it again and its been sitting for about 2 hours now and still at 0%.
View 2 Replies
View Related
Jul 23, 2010
I have several xen virtual machines but the issue is occurring only on the one of them. Sometimes (4 times per month) the server hung. I can ping this server on the network but I am not able to login to server using local console or ssh session.
[Code]...
I sounds like the issue is caused by some Java application. But I am not sure is this message is related to root cause or the Java is impacted as a result of issue.
Could you help me with this? I need more details regarding error message described below and I also need to identify the root cause and resolve the issue. Is there any way how to determine which Java application is causing this issue?
View 1 Replies
View Related
May 26, 2011
I opened a VM in VirtualBox and it hung up (I think that the VM itself hung up, not the OS inside) and it can't be killed, it just sits there, consuming 100% of one CPU core and not redrawing itself.The worst part is that it causes any program that lists running processes to hang up the same way. When I run, for example, ps or ksysguard from the command line, they hang up and can't be killed using ^C.I wonder if there's a way to fix this other than rebooting (not that I have much apps open, but I'm still curious what happened here)?
View 9 Replies
View Related
