Debian Configuration :: Failed To Initialise HAL, Cannot Mount An Ntfs Drive?
May 13, 2010
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
View 2 Replies
ADVERTISEMENT
May 19, 2010
I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies
View Related
Jul 9, 2015
If i click the ntfs partition from nautilus, it prompts to type password. If i type the password and enter, i see this message:
Code: Select allUnable to access “alldisksda5” Error mounting /dev/sda5 at /media/user1/alldisksda5: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda5" "/media/user1/alldisksda5"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0). Metadata kept in Windows cache, refused to mount. Failed to mount '/dev/sda5': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.
View 1 Replies
View Related
Apr 6, 2010
I have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
View 6 Replies
View Related
Aug 24, 2015
when I type 'fdisk -l' I get the following:
Device Boot Start End Sectors Size Id Type
/dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA)
/dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
View 3 Replies
View Related
Sep 22, 2015
I had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .
So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)
I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.
When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'
When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"
Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.
Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.
I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"
View 2 Replies
View Related
Dec 16, 2010
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
View 4 Replies
View Related
Feb 20, 2010
When I plug in my external USB Hard drive which is formatted as a single NTFS partition, it is recognized and mounted automatically, a nautilus window pops open. Unfortunately it is not writable. The reason is: the partition is mounted "ntfs" (which lacks write support) instead of "ntfs-3g". This is the output of mount after plugging in the drive:
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type ntfs (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,dmask=0077)
I want this partition to be writable by just plugging it in.
The partition should not have any errors because a) I fsck'ed it windows and b) mounting it manually works:
$ sudo mount -t ntfs-3g /dev/sdc1 /media/disk_/
$ mount | grep sdc1
/dev/sdc1 on /media/disk_ type fuseblk (rw,allow_other,blksize=4096)
$ devkit-disks --mount-fstype ntfs-3g --mount /dev/sdc1
Mounted /org/freedesktop/DeviceKit/Disks/devices/sdc1 at /media/4EBC5FB82435B0EE
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
$ gnome-mount -nbtd /dev/sdc1
$ mount | grep sdc1
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
How can I get ntfs drives to be mounted as writable by default, preferrably without having to modify fstab?
View 1 Replies
View Related
Feb 27, 2011
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
View 4 Replies
View Related
May 30, 2015
I can't mount my external hard drive with the graphic interface of my Xfce desktop anymore, since the latest upgrade.
The disk does show up, but when I try mounting it, I get a pop up window telling me that :
Failed to mount "My_Passport". Not authorized to perform operation.
View 12 Replies
View Related
May 6, 2015
So after having spent the past half year preparing to abandon Windows and come over to Debian I finally made the switch last night only to realize I forgot one important thing... I didn't figure out how to map the network drive on my Windows server (currently learning to replace this with Debian as well) to my Debian system.
I have read about 15 links but keep getting the following error: Mount Error (6): No such device or address
Here is what I'm trying to enter into my terminal (with important bits removed for security of course)
mount -t cifs //xxx.xxx.xxx.xxx/Network_Storage/ -o username=xxx,password=xxx /mnt/cifs
View 14 Replies
View Related
Jan 17, 2010
Basically, I have no trouble booting off a really old kernel like 2.6.18-6. If I try to boot off the newest one installed with Lenny, I get errors such as "mounting /dev/ on /root/dev failed...ditto for /sys on /root/sys" almost as if it's failing to find the drive. This finishes up with "target filesystem doesn't have /sbin/init" and I'm dropped into a busybox shell.It's an ordinary SATA drive, which is being used as an OS drive only. It seems as if something has changed with the newer kernel, but I have no idea where to start or what to look for.
View 3 Replies
View Related
Mar 8, 2010
is there a way to allow a program mounting a drive without requiring it to ask for sudo password (apart from running it with sudo)? To be more specific, I'm annoyed by the sudo password request by TrueCrypt whenever it needs to mount a volume.
I've thought about creating another user, allowing it to mount volumes and then running TrueCrypt as this user at boot. I don't know whether GNU/Linux allows for such policies... maybe I should look into SELinux?
EDIT: For the issue at hand (encrypted USB stick both on Windows and Linux), I'm investigating FreeOTFE. I'm still curious about the privileges issue, anyway.
View 3 Replies
View Related
Oct 12, 2015
I,ve upgraded Debian Testing to Gnome 3.18, acrivate from Online Accounts file integration of Google service.
In Nautilus left panel i see my Google Drive accounts but is impossible to mount , i have a generic error (impossible to mount position).
How i can fix this?
Same problem on Arch (Laptop).
View 0 Replies
View Related
Apr 6, 2010
I have download file from this site and have done these steps [URL].
tar -xvf ntfsprogs-2.0.0.tar.gz
chown root.root -R ntfsprogs-2.0.0
cd ntfsprogs-2.0.0
./configure
make && make install
Still I have failed to mount ntfs partition with this command..
mount -t ntfs /dev/hda1 /mnt
or
ntfs-3g /dev/hda1 /mnt
The error is .................
mount: unknown filesystem type 'ntfs'
I am using RHEL5.4 and kernel is 2.6.18-164.el5
View 3 Replies
View Related
Aug 5, 2010
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
View 2 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
Feb 18, 2011
We have a VMware box that is connected to a Thecus. The Thecus FTPS the WMware virtual machines onto a PC which has a 2TB drive.
We are trying to see if we can get the FTP'd VMware Virtual machines to run on another WMware node.
However Vmware use's NFS so we can't mount the drive as it's NTFS.
We are attempting to mount the NTFS drive in ubuntu. Can this be done and can it be turned into a NFS share without formatting the drive.
View 2 Replies
View Related
Nov 9, 2010
I am using Red Hat 5.5.I am trying to mount a USB Drive that is formatted as NTFS.Red Hat is saying it can not mount NTFS drive
View 2 Replies
View Related
Jun 11, 2010
I am kind of new to linux. How can I make Fedora automatically mount my NTFS partition on boot?
View 7 Replies
View Related
May 5, 2010
I have a ntfs-partition that I will use for documents for me and another user. I works fine for me.
The partition is mounted and I can read/write.
However, for the other user the partition is not showing up. What to do?
I've tried changing the permissions from nautilus, but no success.
View 9 Replies
View Related
Mar 11, 2011
I can no longer access my external USB hard drive after applying routine updates this morning. It is a WD "My Passport" drive, 500 GB with the standard formatting setup. As far as I can tell there are no errors on it. Upon plugging it in I see a pop-up box "Unable to mount the volume 'My Passport'" and it provides no further information under "Details." If I try mounting from the command line, e.g. mount -t ntfs-3g /dev/sdb1 /media/sdb1 or similar, no errors appear but when I do ls on the directory it comes up blank. Also then if I try to unmount it, it tells me the drive isn't mounted. This drive mounts fine on another computer running Fedora (and all the data on it is readable). I'm guessing there is a bug in one of the updates--here is what updates I applied.
Commit Log for Fri Mar 11 18:09:25 2011
Upgraded the following packages:
avahi-autoipd (0.6.22-2ubuntu4.2) to 0.6.22-2ubuntu4.3
avahi-daemon (0.6.22-2ubuntu4.2) to 0.6.22-2ubuntu4.3
firefox (3.6.14+build3+nobinonly-0ubuntu0.8.04.1) to 3.6.15+build1+nobinonly-0ubuntu0.8.04.1
firefox-3.0 (3.6.14+build3+nobinonly-0ubuntu0.8.04.1) to 3.6.15+build1+nobinonly-0ubuntu0.8.04.1
[Code]....
View 3 Replies
View Related
Nov 17, 2010
I tried to mount a drive via ntfs-config and the following error occured:
Mounting /media/mOVIES failed because of the following error:
Failed to read last sector (146876415): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
[Code]....
View 1 Replies
View Related
Oct 11, 2009
Code:
ntfs-3g /dev/sda1 /media/drive
Or
Code:
mount -t ntfs /dev/sda1 /media/drive
View 1 Replies
View Related
May 6, 2011
I have WD external 1TB USB 3.0 drive that I want to attach to a RHEL 5 computer. I don't want to format it to a FAT32 as I'm copyong over about 530GB of data. What is the easy to get the RHEL OS to recognize this drive? NTFS is not loaded on this system as I already checked.
View 3 Replies
View Related
Dec 20, 2010
What is the procedure for mounting NTFS drive in RHEL5.
View 1 Replies
View Related
Oct 15, 2010
I have an ntfs drive that I use to share files between Fedora and Windows 7 dual boot machine, how can I mount the drive w/o having to give the root password?
View 9 Replies
View Related
Jul 22, 2010
The issue I am having is that Virtual Box does not recognize my USB drives. I understand that it is related to the fact that Ubuntu cannot recognize the permissions on the USB NTFS drive. So how do I mount the ntfs drive and gain full permissions?
One post suggested that I have to join my user to the 'vbuser' group in users and groups to fix this in 9.04, but I do not have a "vbuser" group in my list of groups. I am running 10.04.
View 2 Replies
View Related
Mar 31, 2010
I have reformatted my hard drive with allocation size 64K(formatted on windows with 64k setting) for a better performance on my WDTV HD media player(dealing with large files).When I mount this drive on Linux, the properties tells me that"blksize=4096".If I keep writing files using this default setting(blksize=4096) to my NTFS formatted hard drive, will my WDTV be able to benefit from the performance improvement of 64k allocation size ?I am confused, Does it have anything to do with "blksize=4096". ?Should I try and mount my hard drive with a larger blksize ?I did some research on google but couldn't find an option to increase the blksize when mounting an NTFS pre-formatted drive
View 1 Replies
View Related
Jun 5, 2010
I have two 1TB HDD's formatted in NTFS, one has windows and other stuff i use even on linux and the other is all media. i can mount them easy, but this is a minor annoyance because everytime i log in i must type in my password. is there no way to have them auto mounted on startup?
View 10 Replies
View Related
