Debian :: Install Fcitx Error When Processing Make?
Jun 15, 2011
i am a beginner of debian, and i used ubuntu previously, now i have a problem installing Chinese input fcitx, i did exactly the same as the manual said( i tried ./configure -prefix=<usr/local>, but didn't succeed. so i use ./configure directly) , and here is the website[URL].. but i just can't successfully install it, no matter whether i extract the file in terminal or in nautilus, and here is the file i downloaded from[URL].. below is my terminal output
[Code]...
by the way, i am now using stable version,but i want to use the newest version of chromium, because the old version doesn't fully support my chrolium data stored in ubuntu. how can do that easily? i searched the internet and find it was a little difficult.
I have a post in beginners section but maybe I can find some help here.. If you do not mind,please read the following post about my problem.viewtopic.php?f=30&t=55243&p=320093#p319848
I can still install packages but still is a bit annoying as upgrading the system does not work at the moment. I'm using apt-get because when upgrading with aptitude the Xserver was not working anymore. Xserver came back after an apt-get upgrade but I get this error when trying again to upgrade (Its highly likely that this error message has been there for a while with apt-get upgrade):
BF15:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be DOWNGRADED:
I'm trying to install Adobe Reader 8 and the command #dpkg -1 AdobeReader_enu-8.1.3-1.i386.deb comes up with the message error processing AdobeReader Cannot access archive. No such file or directory. Error was encountered while processing.
I am renting a dedicated server and I'm following a tutorial to install rutorrent. I'm asked to: sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils
But continually get this error ... sudo apt-get install -y build-essential pkg-config libcurl4-openssl-dev libsigc++-2.0-dev libncurses5-dev lighttpd nano screen subversion libterm-readline-gnu-perl php5-cgi apache2-utils Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version. pkg-config is already the newest version. libcurl4-openssl-dev is already the newest version. libsigc++-2.0-dev is already the newest version. libncurses5-dev is already the newest version. lighttpd is already the newest version. nano is already the newest version. screen is already the newest version. subversion is already the newest version. libterm-readline-gnu-perl is already the newest version. php5-cgi is already the newest version. apache2-utils is already the newest version. The following packages were automatically installed and are no longer required: xserver-xorg-video-amd linux-headers-2.6.24-16-generic linux-headers-2.6.24-16 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up acpid (1.0.4-5ubuntu9.3) ... * Starting ACPI services... acpid: can't open /proc/acpi/event: No such file or directory invoke-rc.d: initscript acpid, action "start" failed. dpkg: error processing acpid (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of acpi-support: acpi-support depends on acpid (>= 1.0.4-1ubuntu4); however: Package acpid is not configured yet. dpkg: error processing acpi-support (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: acpid acpi-support E: Sub-process /usr/bin/dpkg returned an error code (1)
I have followed ideas posted in different threads for this problem but none have worked. I'm new to linux so here comes the dumb questions. What is acpid and what problems will it cause if ignored?
i was trying to install mcafee enterprise ed on my ubuntu10.10 got the following error msg
Code: dpkg: error processing MFErt.i686.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: MFErt.i686.deb i tried to copy the contents of mounted folder to another and retried same error msg followed i used furious iso mount
i was trying to install runtime environment first as per the instrucions in installation guide
I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code: Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
May 1 03:15:01 master cp: error processing extended attributes: Operation not permitted May 1 03:15:02 master cp: error processing extended attributes: Operation not permitted May 1 03:15:02 master 700.daily.server.cyrus: Error: /etc/MailServicesOther.plist postfix does not contain a dictionary with key log_rolling_days.
i'm a Chinese student, after I upgraded slackware13.1 to slakcware13.37, I find that I can't use the fcitx input method in emacs to type Chinese. One method is to comment parts of the font path in /etc/X11/xorg.conf-vesa file. I can use fcitx input method in the first emacs that I opened and then when I open a new emacs, I can't use fcitx input method and it indicates that the Ctrl+Space key combination is the Mark command. What's wrong with this problem?
New to Fedora (from Windows), I am up and running ok with packages from the repository but only half ok with Processing, the Java graphics programming front end from processing.org.Their download gave me a .tgz file which Package Manager extracted for me into a location of my choice and where there is now a "processing" shell script.This works ok and I have managed to create a launcher on the desktop. That starts ok but always with processing's default action of giving you a new and automatically named work file.In Windows an existing Processing file (.pde file) could be "opened-with" Processing. Trying to do similar in Fedora I find that I am expected to nominate an Application to open with but Processing has not installed as an application.I guess the question is how do I promote Processing to be an Application?Or is there a different approach?
I finally gathered my courage to install Fedora 12 on my laptop. I burnt a DVD to make the install. But it gives an error saying:Error processing drive/dev/sda.
This sounds scary, because I don't want to format my WHOLE hard disk, I only want to format the several partitions on which I want to install F12.
Code: dpkg: error processing adobe-flashplugin (--remove): Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. Errors were encountered while processing: adobe-flashplugin E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Press return to continue.
Now I can't install anything, I am using Kubuntu 9.10, and have tried fixing this with aptitude and nothing works.
These are some of the things I tried. Code: sudo dpkg --clear-avail sudo dpkg configure -a sudo dpkg --remove adobe-flashplugin sudo dpkg --install adobe-flashplugin
The update manager told me there were several packages to update, and I as usually said 'OK'. Then, it told me that some packages could not be installed. I ran dpkg in a terminal window, and this is what it looks like:
> sudo dpkg --configure -a Setting up openjdk-6-jre-headless (6b18-1.8-4ubuntu3) ... update-alternatives: error: alternative link /usr/bin/java is already managed by java~. dpkg: error processing openjdk-6-jre-headless (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of openjdk-6-jre: openjdk-6-jre depends on openjdk-6-jre-headless (>= 6b18-1.8-4ubuntu3); however: Package openjdk-6-jre-headless is not configured yet. dpkg: error processing openjdk-6-jre (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of icedtea-6-jre-cacao: icedtea-6-jre-cacao depends on openjdk-6-jre-headless (= 6b18-1.8-4ubuntu3); however: Package openjdk-6-jre-headless is not configured yet. dpkg: error processing icedtea-6-jre-cacao (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of icedtea6-plugin: icedtea6-plugin depends on openjdk-6-jre (= 6b18-1.8-4ubuntu3); however: Package openjdk-6-jre is not configured yet. dpkg: error processing icedtea6-plugin (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: openjdk-6-jre-headless openjdk-6-jre icedtea-6-jre-cacao icedtea6-plugin
I am running Lucid 32-bit server P3 command line server version that began life as a 9.10-server, now upgraded to 10.04. Upgrade has been running since June, 2010. A few weeks ago, I realized that phpldapadmin was not running correctly. In finding the solution for the phpldapadmin issue, now, upgrades are giving me the following:
Code: admin@myserver:/$ sudo apt-get update[sudo] password for administrator: Hit [URL] Get:1 [URL] Ign [URL] Ign [URL]
>>>> snip <<<<< Reading package lists... Done administrator@wdnserver:/$ sudo apt-get upgrade ..... No apport report written because MaxReports is reached already
Errors were encountered While processing: grub-pc samba-common samba-common-bin smbclient smbfs E: Sub-process /usr/bin/dpkg returned an error code (1)
I have read many posts trying to find a reference to Code: dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 10 because this started with grub-pc being the first and only package that refused to install. I have yet to find a direct reference to 'error exit status 10'. I find many other status codes, but few of 'status 10'.
Now, unfortunately, work took me away for a few of weeks and now I am getting errors for: grub-pc samba-common samba-common-bin smbclient smbfs
I have tried Code: apt-get -f install and that does work.
I have tried Code: apt-get purge grub-pc and then re-installing grub-pc still gives same error.
And finally there are many other attempts, all with the same result.
Everytime I try to install, or unistall anything, I get an error: Errors were encountered while processing: man-db There are a few different ones, but they all have that.
I have Ubuntu 11.04 and whenever I install gnome3, I will get an error during the install. Following are the details. "sudo apt-get dist-upgrade". I will always get an error pop-up and a error message in terminal saying "errors were encountered while processing: /var/cache/apt/archives/gnome-session_3.0.1-0ubuntu~build1_all.deb" & "E:sub-process /usr/bin/dpkg returned an error code (1)" And when I reboot, I will get stuck at the ubuntu splash page and ubuntu will not load.
E: Error occured while processing abrt (CollectFileProvides) E: Problem with MergeFileProvides /var/lib/apt/lists/download.fedoraproject.org_pub_fedora_linux_update s_12_x86%5f64_repodata_repomd.xml E: The package lists or status file could not be parsed or opened.
I have encounter this problem, one thing i had done is, increase the cache size. But still this problem occur. adibmobile@empatbelas:~$ sudo apt-get check Reading package lists.Error!
E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 8388608. (man 5 apt.conf).
E: Error occurred while processing libnotify0.4-cil (NewVersion1).
E: Problem with MergeList /var/lib/apt/lists[URL].._ubuntu_dists_lucid_universe_ binary-i386_Packages.
W: Unable to munmap.
E: The package lists or status file could not be parsed or opened.
I am running Ubuntu NN 11.04 on an AMD64x2 system, all updates current. I am trying to install a Canon Pixma ip1800 printer with no success after many hours of trying. I have 2GB RAM, an NVIDIA 256GB graphics card and 1TB HD. 11.04 runs great, recognizes my scanner (a separate Canon 670U), but no matter what, I cannot get the software to install correctly, although other Ubuntu Forums have posted instructions. Below is my Terminal output. Can you assist with specific instructions to use. I have tried removing and re-installing packages with Synaptic Package Manager and commands in terminal with no success.
I'm having trouble with my database server run with PHP & MYSQL; i just installed this system on a SUSE Linux Enterprise Sever; the Server its self is an HP Proliant ML370G with 4GB RAM The system was fine for like 3 weeks until recently when it started slowing down. Apparently, eveything is normal when you are accessing the server, for example when you are browsing on the database web interface; but problem is when you start working in the database, when you try submitting into the database, its really slow on processing, i have to first restart the mysql; Could it be RAM? or the SQL itself?
This is the error I get when using apt-get upgrade or package manager dpkg: error processing flashplugin-nonfree (--remove): reinstall it before attempting a removal.
After entering an aptitude command: Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Unknown media type in type 'fonts/package' Unknown media type in type 'interface/x-winamp-skin'
Note that '/usr/share' is not in the search path set by the XDG_DATA_HOME and XDG_DATA_DIRS environment variables, so applications may not be able to find it until you set them. The directories currently searched are: - /root/.local/share - /opt/kde/share - /opt/kde/share - Processing triggers for hicolor-icon-theme ...
I have a VPS running Debian Squeeze. Today I ssh'd in to do an apt-get update and an apt-get upgrade. Some of the packages seem to install fine, however linux-image-2.6.32-5-amd64 gives an error. I've tried rebooting (hoping that it would indeed come back up after a reboot and it did) but nothing has helped. Here's the output from apt:
dpkg: error processing linux-image-2.6.32-5-amd64 (--configure): subprocess installed post-installation script returned error exit status 2 configured to not write apport reports Errors were encountered while processing: linux-image-2.6.32-5-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) I also did an apt-get clean to drop the cache but that didn't help either.
Did not find much here regarding building Gnome 2.30 from source. I'm using jhbuild to build the gnome 2.30 desktop. I have everything, to my knowledge, installed to build gnome. I get an error when trying to build the libIDL library. Anyone have any clue as to what I need installed or changed in the configuration file to build libIDL?
I want to install EVMS n machines with openSuse 11.2. The EVMS installation procedure (EVMS: Installation: Installing the EVMS Tools), point 3, says to do: "make install". I'm in the correct folder, there is the file Makeinstall.ini, but just try to run the command I've an error (make cannot have install like target).
this is my output:
linux-vxth:/usr/src/evms-2.5.5 # ls .makefile.swo INSTALL.initrd aclocal.m4 engine po .makefile.swp Makefile.in autoconf include tests COPYING PLUGIN.IDS config.h.in intl ui
[code]...
I tried too rename "Makefile.in" into "makefile" and "make.rules.in" into "make.rules", but then I have other problems
