I've just installed mysql-server (apt-get install mysql-server) in my debian vps, it ask for password of which i had provided. However after the install finishes, i run the command "mysql -u root -p", i entered my password but says "ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES".
View 3 RepliesI have a MySQL database running on my local server, which I currently access via laptop, desktop using HTML/PHP.I want to re-write in HTML5, I have gone through a couple of HTML5 tutorials but cannot figure out the database interface. The best match I can find is Server-Sent Events, is this the best way forward? What about writing to the database? I have found several suggestions using Web SQL database but I don't think this is suitable as my database is also accessed from Python code on the server.
View 5 Replies View RelatedI am not sure if this is the correct forum to post this as I have usually been able to find the answers from other peoples threads.The error I receive is below.(changed "at" as can't post links)"#1045 - Access denied for user 'root' at 'localhost' (using password: NO)" Not entirely sure what has happened here. I have had this server running for a long time and today it seems to have spat it's dummy out!I have checked the config.inc.php and the controluser and controlpass are entered correctly so the error saying a password is not being usPHP Code:Thisis needed for cookie based authentication to encrypt password incookie
View 2 Replies View Relatedi was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
I have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
I was trying to install MySQLbd (a module for python to connect and access MySQL) I followed these steps for installation[URL].. but while I am getting some installation errors. When I try to run $ python set.py build I am getting the following errors (I removed few errors as I can post more than 10000 characters here)
[Code]...
I'm trying to install mysql on Lenny. I managed to get apache and php going just fine but i'm getting this error for mysql at the mo: The following packages have unmet dependencies.
mysql-client: Depends: mysql-client-5.1 but it is not going to be installed
mysql-server: Depends: mysql-server-5.1 but it is not going to be installed
E: Broken packages
I don'thave a cluse how to fix this. I've read that adding a line in sources.
I just have a quick question. I was following a Snort setup guide and it told me to do apt-get install snort-mysql. I just wanted to understand the functionality of such a command where you specify a program and then do a -mysql (snort-mysql). Does this configure an SQL database for that specific application or what?
View 2 Replies View RelatedI would like to enable SSH on my debian server but not for MySQL. For MySQL, I want to connect normally.
View 7 Replies View RelatedI'm a Linux newbie. I want to install mysql-5.5.15-linux2.6-x86_64.tar.gz on a Debian box offline without using the apt command. How can I do this?
View 1 Replies View RelatedI want to install mysql query browser in debian
View 1 Replies View RelatedI can't get mysql to update from lenny (mysql-5.0) to squeeze (5.1). apt tries to start the server but comes up with some kind of configuration script error.
View 1 Replies View Relatedi have installing the server XAMPP on my PC but i can't access to Mysql
[root@localhost lampp]# mysql -u root -p
bash: mysql: command not found
Since I installed SUSE 11.2 I have been unable to access MySQL via any browser although I can via MySQL Administrator. Firefox keeps asking if I want to open index.php with KWrite, it also occasionally asks this when I am on other sites. Konqueror gives an immediate timeout error.
View 2 Replies View RelatedWhat's the best way in centos to block a user from accessing mysql. I don't want him to be able to run the mysql command, so just putting passwords up in mysql is not good enough. Mysql is running ad user=mysql, and i added the user in a different group by he is able to access mysql by typing in the command.
How can i block this command being availible for this user.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I set up mod_proxy in order to get rid of :8080 now I cant access phpmyadmin through the browser. what is the quickest way to turn off mod_proxy and access phpmyadmin? I would like to optimize the tables and back up the sql file. I just need to turn it on for a bit, and then enable mod_proxy again.Right now, if I got to localhost/phpmyadmin, it redirects to the main application.
I have used a2enmod, and added
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_ajp
[Code]...
When you access mysql within the same Apache server (same ip address) via php, do you need to GRANT user ip in order to login to mysql?
Where are the log files for php, mysql etc?
I'm running an Ubuntu 9.04 Minimal server and trying to get MySQL to work correctly. But when I try to access MySQL with the root user it doesn't want to.
Code:
mysql -u root -p
Enter password:
[code]....
There is a simple select query in a.php. If i run directly a.php, there is no problem but if i call a.php from b.html with ajax i have Access denied for user 'www-data'@'localhost' (using password: NO)error.
View 2 Replies View RelatedI erased Windows a week ago and is loving Ubuntu 10.04 (which changed to xubuntu after installing Qimo for Kids??) ever since. Now I want to get coding again and PHP is working fine, but I can't access mysql!?I followed a ton of guides, completely removed, reinstalled etc. Nothing works.Here some stuff that might be interresting. I can't remember the "ls" and "awk" and "grep" commands to use, so please guide me if you need more info.
sudo mysql status
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
sudo update-rc.d mysql defaults
update-rc.d: warning: /etc/init.d/mysql missing LSB information
[code]...
I'm using slackware 13.1 and I have a problem to accept remote access to mysql server.The steps I have followed to do that thing are:vi /etc/my.cnfline skip-networking is commented
bind-address my_ipaddressI opened the port 3306 of my firewallAlthough I can connect locally, i.e. mysql -u a_user -h localhost -pI can't do it remotely i.e. mysql -u same_user -h my_ipaddress -pI have also turned off my firewall, but nothing.telent 3306 my_ipaddress results in: telnet: connect to address my_ipaddress: Connection refusedMy my.cnf file is:
Code:
[client]
port= 3306
[code]....
I have a question in regards to enabling root remote access to the server.I am trying to use the mysql workbenchit kicks back an error saying "Access denied for user 'root'@'10.x.x.x' (using password: YES)" But I am able to login locally on the server.How do I enable root to long on remotely from any workstation?
View 3 Replies View RelatedI'm trying to migrate my company server to linux, but i have a program that is designed in access what is the best way to move access tables to a mysql database so that i can program it in PHP?
View 3 Replies View RelatedI know this is probably something small that I'm missing, but I haven't got a clue to be honest with you. I've setup a proper LAMP and everything on the server is working properly. I'm thinking maybe it's a file permission..? Well let me get to the problem. Everything is installed and it's time for me to complete the web-based install. I've tried going to just phpBB3/,phpBB3/index.php, phpBB3/install...etc! When I insert any of those in the address bar with my FQDN obviously, it decides to just download .php files all over my desktop.
View 2 Replies View Relatedi am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I have yum installed mysql 5 on Centos5 and I can successfully run queries through shell.However, I want to now allow external access to mysql via some mysql tools (Mysql Administrator/Mysql Query Browser) which is on some windows machines on the same network.Mysql is running on port 3006.When i try connecting through mysql Admin i get the following:Could not connect to the specified instance.MySQL Error Number 2003Can't connect to MySQL server on 'ipaddress' (10065)If you want to check the network connection, please click the Ping button.Googling this I get the impression its something port related, but I have tried what I have found and still no go.When I ping the server I get:
Start Pinging:
Reply from ipaddress: Time=0ms TTL=64
Reply from ipaddress: Time=0ms TTL=64
[code]....
We started our project (it's a website "employee performance appraisal system") in windows by starting with some html forms and then slowlyadded php ,javascript and other stuff in windows we had no issues of insertion and retrieval of data from thedatabase.Now,we decided to shift the entire stuff to drupal the html forms along with those php files but we had 2 issues with this1. the first one was ..we created "page" for each html form and copied the html code into "page" but we didn't find where our pages are getting stored (do they get stored in mysql database that we create for drupal siter do they remain as html pages somwhere?)2.second problem was ...for admin in drupal I gave the username "root" and a password ..similarly for mysql also I gave a password.
now I used phpmyadmin and created another database called "appraisal" which is supposed to hold the data of our website.when I try to insert data into one of the tables of this database (attendance table) ,the following error occured "Attempt to connect failed access denied for user 'root'@'localhost'(using password:NO) cannot run querry insert intoattendance values('x','y')" Access denied for user 'root'@'localhost' (usingpassword:NO)Also I'm unable to access mysql as a normal user only super user can access and can we unset the password that's required to reach mysqlprompt?
One server is a dedicated MySQL server. After upgrading that one to Ubuntu 10.04 (from an ancient Suse 9.2), both servers are running Ubuntu 10.04 LTS.I have another server that I use to administer the database server via phpMyAdmin. However since the upgrade it is not able to connect. I get an error #1130 Cannot log in to the MySQL server. The same happens if I try to connect remotely from the command line with: mysql -u root -h 129.79.137.121 -pI'm not sure if this is an iptables/ports problem or a configuration problem on the MySQL end or something else entirely.I've searched and tried the suggestions I've found in various places but none seems to have fixed it.
View 2 Replies View RelatedCannot seem to use my mysql password, keep getting the error
"Access denied for user 'root'@'localhost' (using password: YES)"
So I tried checking my password using mysql -u root -p and I get the same error as above. I've tried accessing mysql with skip grant tables disabling the need for a password so I could reset my root password. After going through the necessary steps I still get the error above when typing my password in for mysql.