i need it to use sakis3g script for usb 3g modems.Are those programs listed anywhere, idk if i have to search for any other dependencies.Like cd 2 contains the following programs..cd 3 contains the following programs...cd 4 contains the following programs.
View 3 RepliesHP ProLiant ML110
Intel(R) Pentium(R) 4 CPU 3.00GHz
External USRobotics V.90 56K FaxModem
Plugged into first serial port
dmesg | grep 'erial'
[ 2.160168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[Code]...
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
I recently encountered an error with pppd on both openSUSE 11.2 and 11.3. I use umtsmon (which uses pppd) to connect to the internet with my 3G device. Yesterday for some reason it just plainly refused to connect to the internet. I have been using the same configuration for almost a year now without any issues. I tried it on 4 different computers running 11.2 and 11.3 and all of them failed. Thinking that it is the hardware I borrowed a windows laptop and tested it on that, only to find that it works flawlessly. On my network server I sometimes use the device as a backup and activate it with "ifup modem0", for some reason this also now fails.
After doing some troubleshooting I managed to extract the following from pppd.
Running it with my user account:
pppd options in effect:
I have no idea why pppd would break all of a sudden but I expect it might have been an update that broke it since I have automated updates on all of my systems.
I have a couple of questions for anybody willing to answer them. I have a GSM modem with a t-mobile SIM card that I am currently trying to use to connect to the Internet. I am using Lucid amd64 machine.I have been running wvdial with a baud rate of 115200 with much success getting the output below:
Code:
sudo wvdial
--> WvDial: Internet dialer version 1.60
[code]....
If I connect with a 3g modem or with wireless sometimes the resolving does not work. This happens on opensuse 11.2. nslookup and dig works but nor ping nor ssh nor any other network application does work If I modify the /etc/resolv.conf after connecting to a wireless network for example it does not work even the dns are known And more strange if the resolver works and I modify /etc/resolv.conf with known dns the resolver does not work anymore. BTW: the dns entry from the wireless is 192.168.1.1 and I do not have any idea how the wireless ap is configured... so it could be in this case that dns is not forwared only allowed to use 192.168.1.1 but the other case is a 3g modem which not even the propagated dns entries works in the bad case
View 9 Replies View RelatedI am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows:
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular"
[code]....
I have ubuntu 9.04,when i configure my internet connection using pppoeconf i had got this result
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I cant access internet through linux,plz help any reply will be appreciated
I am using kppp in ubuntu10.10 to connect via my samsung c3010 mobile and Airtel connection. But when I dial through it, it terminates on signal 15! Some requests are rejected it seems. I am pasting the log:
Dec 14 20:08:02 pratik pppd[1883]: pppd 2.4.5 started by pratik, uid 1000
Dec 14 20:08:02 pratik pppd[1883]: using channel 5
Dec 14 20:08:02 pratik pppd[1883]: Using interface ppp0
Dec 14 20:08:02 pratik pppd[1883]: Connect: ppp0 <--> /dev/ttyACM0
[Code]....
I am connecting the modem over USB. The GUI shows me it is dialling the number, and then connecting to the network, and after a while ( it sends it 9 times it seems) it terminates.
QUESTION: Where do I add "pppd nomagic" to stop analog modem loopback errors? (I am using Gnome PPP.)BACKGROUND INFO:I am using Ubuntu LTS 8.04 on a laptop and have an analog modem connected via USB serial cable. The 8.04 dialup and the analog modem work flawlessly.Modem disconnects when using Ubuntu LTS 10.04.1 Live USB:I am testing LTS 10.04.1 on a live USB drive that I purchased preinstalled from On-Disk.On the live USB drive, I am able to get a dialup connection with my ISP long enough to pull up a web page with the browser. However, the analog modem disconnects within minutes with exit codes 16 or 17.an pppd:16 The link was terminated by the modem hanging up.The PPP negotiation failed because serial loopback was detected.
View 1 Replies View RelatedI'm looking for a tutorial on how to create a simple pppd tunnel between two machines. I've found alot of tutorials about pppd over ssh (using the pty option) but for the purpose I just want a simple pppd tunnel.
Specs
host 1: lan ip 10.101.10.20 running slackware 13.0
host 2: lan ip 10.101.10.21 running slackware 13.1
I have to run "pppd call idea" command from root shell every time to connect to internet from mobile. Now I want a script so that I just run it to connect. Something like :
#!/bin/sh
echo "password" --stdin | su -
pppd call idea
But its showing error that "standard in must be a tty". Why is this. Using CentOS 5.5
I can connect to Strongvpn (pptp) through command line call 'sudo pppd call stongvpn' followed by' route add default dev ppp0'. Everything works well.I would like to set this up on start up. I use kde. I have set up basic /etc/init.d/strongvpn script which gets called at boot and creates ppp0 but the route command does not seem to work. When I use command route add in terminal the connection comes up.Here's my /etc/init.d script
#!/bin/bash
# chkconfig: 345 85 15
pppd call strongvpn
[code]....
I previously had an Openswan-based IPsec/L2TP solution that was working marvelously on Ubuntu 8.04 LTS. I upgraded to Ubuntu 10.04 LTS and cannot seem to get it working again.
First, Ubuntu's version of Openswan (2.6.23) does not work with NATted transport mode [1]. Since an L2TP connection is in transport mode, I downloaded Openswan 2.6.27 to /usr/src/, and ran "make programs" and "make install".
This allowed my IPsec and xl2tpd configuration that I previously had to work again like they were supposed to. (Aren't you relieved this isn't an IPsec question?)
Anyway, xl2tpd starts up an instance of pppd for the new incoming connection using /etc/ppp/options.xl2tpd. But for some reason my previous configuration was not working. After hours of searching and tracking things down, I've narrowed it down to the following lines in my options.xl2tpd file:
Code:
require-mschap-v2
plugin winbind.so
ntlm_auth-helper '/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1 --require-membership-of="EXAMPLEDOM\VPN Users"'
[Code].....
I followed the instructions given in the link below in order to connect to a VPN server from my Ubuntu 10.04 PC.
[URL]
As mentioned in the above link,i had the system setup. I am able to connect to VPN using the default network manager that comes with Ubuntu.
But from command line, using pppd dialing,i am unable to connect to server.I get only the following messages in /var/log/messages always.
Log:
####
Oct 6 15:01:09 hari-desktop pppd[3660]: pppd 2.4.5 started by root, uid 0
Oct 6 15:01:09 hari-desktop pppd[3660]: Using interface ppp0
Oct 6 15:01:09 hari-desktop pppd[3660]: Connect: ppp0 <--> /dev/pts/5
Oct 6 15:01:10 hari-desktop pppd[3660]: Connection terminated.
[Code]....
Is there any specific VPN client using which i can establish a connection with the following information in hand ?
I'm using fedora core-8. I need to setup dialup server to accept dial up connection.Dial up server shoudl also allocate ip address to client (trying to connect using modem)If some one knows how to do this, please let me know.I'm trying to achieve peer to peer communication between two computers connected using modem on both side over PSTN line.
View 2 Replies View Relatedcreate a pppd server to allow other users to connect through my telephone line.Could you suggest a documentation to get started?
View 2 Replies View RelatedI want to connect to a vpn server and I'm using debian 5.
I installed Kvpnc package but when I try to make a new profile I choose "Microsoft pptp" as vpn type and I receive the following message: the required daemons (pppd and pptpd) aren't availabale
Is there anyway to download required daemons in another computer and use them in my computer (I'm worried about dependencies)?
i am having following error: /usr/src/dahdi-tools-2.4.1/ppp :this is my current path when i use make here i get below error pppd version not found (in patchlevel.h). Install ppp source/headers and/or ./configure --with-ppp=PATH. exit 1 make: *** [dahdi.so] Error 1
View 1 Replies View RelatedI am getting error "exec: chat: not found" while trying to run pppd.
View 1 Replies View RelatedI have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
I know of 3 at least so far Sidux and GRML and DRBL are there any others that are based on stabel or sid? or what? frugal as in like puppy, tinycore, dsl, etc nomadic like, usb, hd, etc?
View 14 Replies View RelatedIs it exactly the same? I saw 5'th smoothing and 6'th smoothing. For me - no difference at all. Does anyone have precise technical information?
View 1 Replies View RelatedI have a Windows domain with a proxy. I have an account that can use the proxy and the URL that points to the proxy.pac file. this might seem a stupid question but can anyone tell me how do I enter the username and password for my test Windows account so that Debian can authenticate it?
View 1 Replies View RelatedI had (and still do) a working dual-boot XP/Karmic (GRUB version 1.97 beta4). I shrank the Ubuntu partition and set up partitions and installed Debian 5.04. When I got to the point of installing GRUB, I told Debian to install grub to MBR. On rebooting, Ubuntu was not an option on the NEW (looked different) grub menu.Maybe it was GRUB2? Could boot to either XP or Debian though.
Thought easiest thing was to reinstall Ubuntu since it seems to "see" other OS's more reliably. So I did, and installed GRUB again during its install to MBR. Then, all three were in the GRUB menu (version 1.97 beta4 again), but when tried booting to Debian, got an error (forget the wording), but think it was because the partitions got renumbered when installing Ubuntu.
SO, reinstalled Debian, reformatting the partitions but not deleting them first so the numbering stayed the same. When got to the part for installing GRUB, I told it to skip (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..."), hoping now the current GRUB would work.
Now, all three were on the GRUB menu, but when I tried to boot Debian, I got "no such device" and a list of numbers/letters after it. And "press any key to continue", which takes you back to the GRUB menu (version 1.97 beta4, by the way).
O.K., did sudo update-grub in ubuntu and rebooted. Now, Debian 5.04 shows as last entry in GRUB, and choosing it starts a boot, which hangs at "Begin: Waiting for root file system....".
Waiting long enough at the "Waiting for root file system..." hang results in a series of notifications:
WARNING bootdevice may be renamed. Try root=dev/hda3
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the sytem wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda3 does not exist. Dropping to a shell!
In Gparted, the partition with Debian root is hdc3, although on the GRUB menu it's listed as /dev/sda3. However, in Gparted the Windows partition is hdc1 and on GRUB it's /dev/sda1, and it boots fine.....
Is my Debian install just borked? Did telling it to skip installing a bootloader (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..." ruin it?
If skipping the bootloader install did ruin it, how do you install Debian without borking your current GRUB? That's what happened the first time.
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
I got two harddisks, sda and sdb. Is it possible to install Debian root into software raid partitions sda2 and sdb1 leaving all other partitions 'normal' (not-raid)? do partitions sda2 and sdb1 need to be exact same size and position?
View 4 Replies View RelatedI have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
View 1 Replies View RelatedUpon installing Debian, it asked me if it can use a mirror to get updated packages. I said no, yet it ignored my command and fetched packages. Why did Debian disobey me?
View 12 Replies View RelatedI have been learning Debian by using a virtual machine. After fine-tuning my installation procedure, I decided to copy that installation to my physical system. The hard drive already has another Linux based system installed. I plan to dual boot.After copying files I updated fstab and menu.lst.The partition scheme between the virtual and physical environments are similar, but the partitions are not mapped exactly the same.Thus the Debian system on the physical hard drive fails to boot simply because the initrd is created for the root partition location on the virtual machine. The initrd created in the virtual machine is looking for the root file system on /dev/hda1 whereas on my physical drive the new location is /dev/sda7.How can I rebuild the initrd on the physical system? I started to use the installation DVD in rescue mode, but I did not get too far.
View 6 Replies View Related