OpenSUSE :: KMail Doesn't Show "fancy" Headers Anymore?
Apr 2, 2010
On KMail (KDE 4.3.5), I normally had the "Fancy" Message Header style (which I like), but I wanted to inspect all the headers for one particular email, so I clicked View - Headers - All Headers.
That was a mistake. I can't get back to having KMail default to Fancy Message Headers - no matter what I select for an email, every new email shows up as "Standard Headers".
I can't find any options under Settings - Configure KMail that would control the default view. Does anyone know how I can get back to defaulting Fancy Message Headers?
View 2 Replies
ADVERTISEMENT
May 7, 2011
I'm fairly new to Ubuntu and I like it a lot. However, there's a graphical error which started to happen after the very first bootup. The startup screen (the purple one with the 5 dots that appear) isn't showing anymore. It is replaced by some console technical guff scrolling down my screen (which isn't a problem, because Ubuntu itself works fine, but it just looks a bit rough). Again, on shutdown, it displays some amalgamated mix of more technical jargon, and a terribly lo-res version of the shutdown screen.
Is there any way I can fix this?
View 4 Replies
View Related
Mar 15, 2010
I'm using Kaffeine 1.0-svn3 from Packman repo on openSuse 11.2 with KDE 4.3.5. In Kaffeine, I can not find the menu where I can choose the subtitles. (I want to watch an avi-file with a separate subtitle-file in srt format). With openSuse 11.0, KDE 3.5.8. and an older version of Kaffeine, there was a possibility to select subtitle files (srt).
View 5 Replies
View Related
Feb 7, 2011
I am using KMail Version 1.13.5 and until recently i am no longer able to download or send mail without having to restart the app several times, when i have logged into my webmail, i can see that there is clearly mail there, but kmail doesnt see it. i use pop3 and smtp protocols and they have worked fine until now?
View 4 Replies
View Related
Jul 24, 2010
11.3 KDE 4.4.4
I've imported my contacts in adressbook and I can see them in Kontact - Adresses. But when I compose a new mail, I can't select any of my contacts. There is a combobox to select between following choices:
All
Default Adress book
Distribution list
recent adresses
Selected adresses
But none of these options shows the contacts I have imported. And I can't find an option to make my imported adress book the default adress book.
View 8 Replies
View Related
May 19, 2011
i used sle11 before.my brother makes it's bootscreen diffrent like walking penguins on the screen.can i make the same thing on opensuse 11.4?
View 9 Replies
View Related
Mar 25, 2011
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
View 4 Replies
View Related
May 23, 2011
have You noticed that mt command doesn´t work anymore on 11.4? We try to install new version to hadle robotic library, but someone has written mt command as a new, and it doesn´t accept mt -f command anymore. cpio based mt command it´s not reliable as old one. Can anyone tell where to get old mt command which is compatrible new 11.4 x64 bit version?
View 9 Replies
View Related
Jun 26, 2010
Installed version are:openSuse 11.2KDE 4.4.4After installing some upates does my firefox will not starts anymore. And I have no idea why. It's seems not really a problem with firefox itself, because some other programs can't be started as well. Such as eclipse or Googles ChromeIt's appears only for few secounds the program in the task bar, and disappears then. Is there some log file or something like this, there I could see what happens in the start procedure of the firefox program
View 3 Replies
View Related
Apr 5, 2011
I just upgraded from kde 4.4.4 to 4.6.0 in the *stable* kde repo, and now beclock effect doesn't works anymore I can't live without it how can I solve???
View 2 Replies
View Related
May 6, 2010
After installing openSUSE 11.2 to get rid of my suddenly dysfunctional 11.1, my Audigy 2 doesn't produce a single sound anymore - neither via the regular nor the digital output. It used to work like a charm on 11.1. I cannot say how much I have come to hate Linux during the past 12 months after constant problems with system instabilities due to incompatible software component updates and stuff like my system still not working after ominously going out of service and "repairing" it with openSUSE's repair function.
I decided to get into Linux because I found it cool when I started with a couple of years abo and thought it would be well worth getting into an OS that might become the successor of Windows. I also wanted an OS I felt secure with when doing online banking or shopping.
Well, I have to say that Windows 7 delivers on all the promises Linux has made (at least those that are important for me), and that Linux hasn't advanced a micrometer in the time I have started using it. The only thing in favor of Linux was that it worked well enough on my 6 year old hardware. I'd rather purchase some new hardware and Windows 7 on top of than tormenting myself more with this unspeakable PITA Linux has proven to me to be. To hell with it. Stay in your server corner, but stop telling people Linux was anywhere close to being a useful desktop operating system. PS: Yes, I have tried other distros too.
View 9 Replies
View Related
Feb 12, 2011
I've just noticed my Dolphin compress service menu doesn't compress anything except for '*.zip'. It used to compress '*.tar.gz' and '*tar.bz2' but now none of these work, and the bz2 option is gone altogether.Does anyone know what might have happened?I have openSUSE 11.3 & KDE 4.6, but this happened before I upgraded to KDE4.6 just a few days ago, so it's not KDE4.6 related, maybe 4.5? maybe Dolphin?I also tried to install the extract/compress plugin but it says "Could not find program 'compress_TARBZ2.sh'" which all are in my /bin folder. I also checked I have all the extract/compress file installed: zip, tar, gzip, bzip and so on.I also tried 'Compress to...' which open Ark, then I selected either 'gz' or 'bz' and still nothing happened.
View 9 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Apr 17, 2010
I have been using kmail on opensuse (11.2) for about 3 months with few issues. I usually launch using alt+F2, type "kma" and it appears top of the list. I have turned on my laptop today and kmail has simply disappeared. I have gone through the ghekko and the only mail client listed is thunderbird. It is not in the alt+F2 menu. If I type kmail in konsole I get the "if kmail is not a typo" speech. I've also tried using kontact (for the first time) to see if my mail appears there
View 4 Replies
View Related
Aug 3, 2010
I've just installed 11.3 on my mother's laptop. I downloaded and installed Swiftfox, but there's no evidence of it in the menu. I can double-click the Swiftfox.desktop icon in /usr/share/applications, and Swiftfox runs properly. However, it's not listed in the KDE menu.Is there a way to manually update the menu?I didn't have this problem with the previous version of openSuse on this computer. But I did a fresh install, rather than update to 11.3.
View 3 Replies
View Related
Feb 21, 2011
my cpu usage goes way up. Top doesn't show anything using the cpu to any great extent. I did a "ps -ax" and statred doing process kills. I kiilled a dbus pre-fork first, which brought, which stopped the cpu hogging. This is the process line:
/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
Does anyone know what that does, or what I killed?
View 9 Replies
View Related
Jun 29, 2011
I use gtranslator to translate po files. Gtranslator worked fine on 11.3 but when I installed 11.4 it crashed. I opened a Bug report here. Although I followed instructions, I couldn't solve it. Now I use Gnome 3. I installed gtranslator from the page where it says about Gnome 3. Now my gtranslator is 2.90. Now when I open a file, it returns the following image The numbers you see below are the words. I don't see a thing. I can move to next word but I still cannot see anything.
View 1 Replies
View Related
Oct 11, 2010
I installed xmms2 from the packman repo. I doesn't show up in the launch menu. If I try and start it from the CLI I get the following
[Code]...
View 4 Replies
View Related
Mar 9, 2011
when I add a birthday to a contact in Konact,I expect it would show up in the PIM calendar. The birthday calendar has a check box in it.Suggestions on how to troubleshoot/fix
View 3 Replies
View Related
Dec 17, 2010
I've read the sticky post about getting my wireless to work. Here's what I know:
Wireless LAN doesn't show up in my hardware list. But the wireless usb adapter I have (D-Link DWA-160) does show up under USB devices, with the following UDI info:
UDI:/org/freedesktop/Hal/devices/usb_devices_7d1_3a09_12345_if0
When I look at the boot.msg log I see nothing about a firmware failing to load. Does that mean I already have it?
When I try the /usr/sbin/iwconfig command I get:
lo no wireless extensions
eth0 no wireless extensions
When I try the /usr/sbin/iwlist scan command I get:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
There's a page (ar9170 - Linux Wireless) where I can supposedly download the ar9170.fw firmware that supports this device. But when I try to download it it doesn't show up in the /lib/firmware directory and I don't know why.
The system sees the USB adapter, but it doesn't appear to be working. Do I need the firmware? And if so, how do I download it-
View 9 Replies
View Related
Apr 19, 2010
I have been using Ubuntu for a few days and it keeps on surprising me: This morning when I turned my pc on instead of displaying list of available OS versions GRUB just prints out "[ Minimal BASH-like line...." and console with prefix "sh:grub>". Why is the list gone and how can I get it back?
View 6 Replies
View Related
Mar 25, 2010
I updated Firefox today via Yast, since this time it doesn't show any page.I choosed in Configuration no proxy.The sites are empty, nothing just white.I also tried a downgrade to the previous version, didn't help.The Firewall I deactivated for test in Yast, too.A new profile didn't help, starting as administrator either not.
View 4 Replies
View Related
Feb 13, 2011
I installed openoffice. installation seemed to go well, but openoffice doesn't show up under main/applications/office. in fact - it doesn't show anywhere.
I did find it using "find files/folders" ...in the folder:
There's a file called soffice of Type: Shell script that runs openoffice. How do I add this to my menu?
View 5 Replies
View Related
Feb 7, 2011
I have a 11.3 machine as a print server sharing out a printer Then I have two clients using that printer. One 11.3 and one 11.4 6 of 6. When I print from LibreOffice on either machines every other print job disappears. I'm a bit puzzled ! It's not random it's exactly every other that doesn't show up at the server. It's not in the server job log.
View 5 Replies
View Related
Aug 11, 2010
I use kmail in kubuntu 8.04. Whenever I have a wired connection, kmail checks email and sends messages just fine. However, any time I switch to wireless, kmail just says "No new messages," without even checking. I am also unable to send email over wireless.
View 5 Replies
View Related
Oct 14, 2010
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
View 9 Replies
View Related
Aug 22, 2010
I have openSUSE 11.3 Gnome installed. The nautilus address bar shows the "Button Bar" and if I press Ctrl+L it swaps to the "Text Location Bar". The Text Location bar is where you see the full path to the directory that you're viewing.But I can't set the default addressing to the Text Location Bar.What else should I do to get the text location bar (i.e. the full path) to be the default view in the address bar?
View 4 Replies
View Related
Jan 24, 2010
I have a laptop running 11.2 with an internal Broadcom-based Wi-Fi card that's working fine. I'm trying to get 802.11n going with the WUSB600N. The USB ID on this device is 1737:0079. I believe this means it's a "V2" with an RT3572 chip.
No driver loads for this device when it's plugged in. If I do a "modprobe rt2870sta", a driver loads, and syslog shows "rtusb init" and "usbcore: registered new interface driver rt2870". But ifconfig -a doesn't show a new network interface. I've also tried building the RT3572 driver from the manufacturer's web site. It builds fine, and modprobe will load it, but I get the same results as the rt2870sta driver.
View 1 Replies
View Related
Feb 14, 2010
It doesn't show it on the device-notifier, or fdisk, and not sure if this will be any use to you. In windows it appears immediately as a MSD, doesn't show as a modem or anything first.
Code:
linux-gg0e:/home/Chris # tail -f /var/log/messages
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 51 to 50
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Usage Attribute: 195
[Code]....
View 1 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
