I am running a Gnome desktop but do not have the gnome metapackage installed. Recently I have noticed updates wanting to install Gnome 3 versions of some of my applications including gnome-terminal and gnome-system-monitor. I want to stick with the Gnome 2 versions and Gnome 2 in general. Is there a way of doing this without reverting to Stable?
View 1 Replies
I installed debian testing (wheezy) in virtualbox as I plan on installing it on a laptop. I thought it would come with gnome 3 but that appear to not be the case. [url] Is unstable running gnome 3? Is there a way to run gnome 3 with testing or would that be a bad way to go about it?
View 2 Replies View RelatedI'm on Debian testing and every time I try to install Gnome I get this:
Code: Select all# alexandernst at stupidbox in ~ [18:51:07]
$ LC_ALL=C sudo tasksel install gnome-desktop --new-install
tasksel: apt-get failed (100)
I tried installing it manually:
Code: Select all# alexandernst at stupidbox in ~ [18:51:35]
$ LC_ALL=C sudo apt-get install gnome
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
Is this a problem in Debian repos (held packages) or I'm actually doing something wrong?
I wanted to check it out.I want to install the minimum gnome environment.
View 7 Replies View RelatedI am looking for a tool or command to test a USB pen drive.
This would typically involve outputting 8GB or 4GB of data from /dev/random (for example) to the pen drive, then reading it back and checking that 4GB/8GB is read back correctly or if in fact there is any errors when writing.
Does such a command exist or can it be made?
Perhaps using dd or something similar.
I know Windows utilities exist, so it must be possible on linux!
I'm looking for a good tutorial to install minimal Debian with Gnome on USB Memory stick and make it bootable.
View 9 Replies View RelatedI am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
i would like to try gnome 3, just wondering when, or if, the alpha was released yet, and where i could get in when it is released.
View 2 Replies View RelatedI would like to know the procedure of updating the Gnome with and ISO file. Have downloaded Gnome 3 from Gnome.org in ISO Format. But unable to get the Gnome updated with USB Stick
View 4 Replies View RelatedI tend to stay on for long time. My machine is a Fujitsu T4310 tablet. I have got all tablet features previously working properly when I was on Isadora Mint. After installing LMDE to my surprise basic features of the tablet simply worked out of the box but I'm missing a few important features like multitouch, screen rotate and buttons in tablet mode.
As far as my experience with Isadora, it needed a driver called "fjbtndrv", but I couldn't find it in the repos, moreover, I think it might need some tweeks to get it behaving properly. I found some refferences but it refers to other ubuntu based distros, which I can't use of course.
p.s. prefere a solution other than compiling it myself, it looks scary and has lots of dependencies.
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
View 1 Replies View RelatedI'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
Howto install busybox with Gnome on a USB memory stick and make it bootable?
[URL]
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies View RelatedI've heard a lot of talk about people running 'Testing' as a rolling release version of Debian. As I have a spare box to play with, I wanted to see what this was like. I've done a minimal install of Squeeze and had a look at /etc/apt/sources.list. As I would expect, the file refers to Squeeze and not 'testing' (I think Woody used to go for stable/ testing etc, but this then got changed). In order to run 'Testing', can I just replace the Squeeze references and do:
View 6 Replies View RelatedIs there any way other than building the source for 1.1.42 and manually installing it to actually get the latest version on my Debian Testing? How long does it normally take for new versions of Wine to get into the repo's?
View 2 Replies View RelatedIs there any program for GNU to calculate CPU's performace in marks (should support multi-core CPUs)? So it will be possible to compare performance of different CPUs.
View 4 Replies View RelatedI'm new to Debian, but because I'm used to Ubuntu and Mint, I searched in Gnome menu for a link to Synaptic, and there isn't one, so I opened synaptic from Terminal, using "synapric" command as root. I don't know if this is the proper way to open Synaptic, but when I try to install VLC, Synaptic returns the following message in a pop-up dialog box:
Please insert the disk labeled:
Debian GNU/Linux testing _Wheezy_ - Official Snapshot
i386 CD Binary-1 20110711-03:22
in drive /media/cdrom/
This is what greeted me this morning. I think I'll leave it until after breakfast. Current status: 291 updates [+291], 3601 new [+1]. root@chaffinch:/home/eric# aptitude full-upgrade The following packages will be upgraded:
[Code]...
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies View RelatedDebian testing still ships Wine 1.0.1. Are there any plans to update it to the recent release version?
View 14 Replies View RelatedAfter trying to use the safe-upgrade command with aptitude, I receive these errors:
apt (0.8.11) unstable; urgency=low
apt-get install pkg/experimental will now not only switch the candidate of package pkg to the version from the release experimental but also of all dependencies of pkg if the current candidate can't satisfy a versioned dependency.
I have a slight problem. I think it is corrupted file(s).
My Debian Testing KDE is not functioning properly. When I Leave and click Restart Computer, the computer does not go to a reboot but goes to the KDE login screen. When I cold boot the computer and click Restart Computer from the KDE login window, the same thing happens, the login window reappears.
When I choose Turn Off Computer, the computer properly powers down.
It looks like I should re-install something but what that something is I don't know. I checked the boot and dmesg logs. Nothing leaps of the screen at me but I have to admit that I am not 100% sure what I am looking for.
I'm tryin to install virtualbox on my debian testing, but when i check my package manager there is no virtualbox-ose package
View 3 Replies View RelatedToday i`ve updated kernel packages to version 3.0.0. on Debian testing. After that- updated grub. But after all this the old one kernel version[2.6.39-3] is booting. What can i do?
View 7 Replies View RelatedI have been searching the forum regarding info about the debian testing going into freeze, but cannot find specific info regarding some of the facts. I understand that after some time the testing version (squeeze currently) goes into "freeze" before it becomes the new stable. Now, what does freeze actually mean? Currently I'm running Squeeze, and updating as the update software suggests, and since first install, I got a new kernel image, some updates to applications I use etc etc. So, when testing goes into freeze, all updates are stopped and only bugfixes are released, am I right? But I'm curious about one thing, for example I have gnome DE with let's say network manager applet 0.8.
So when testing is done with freeze and becomes the new stable - does it include current versions of kernel and programs that were actual during freeze? Will I have network manager applet 0.8 after freeze is gone to stable, or will it revert to... dunnno 0.7.6 version? At this time I have kernel version 2.6.32-5-686 , when I first installed it was 2.6.32-3-686 , so when going into freeze then stable kernel won't be downgraded, right? Btw I'm not using Sid's repositories. Well I least I think I'm not, the sources.list doesn't include sid's repos... Well sid non-free is there.
I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies View Relatedjust installed testing on my netbook. my sources.list file all say wheezy. it was my impression that debian testings nickname was squeeze. are wheezy and squeeze the same thing?
View 14 Replies View RelatedJust switched from stable to testing. To run a pure testing, can someone tell me if I have all the necessary repos below?
deb http://www.debian-multimedia.org testing main non-free
deb http://getswiftfox.com/builds/debian unstable non-free
deb http://ftp.debian.org/debian testing main contrib non-free
deb http://security.debian.org/ testing/updates main contrib non-free
deb http://www.debian-multimedia.org testing main non-free
deb http://mozilla.debian.net/ squeeze-backports iceweasel-4.0
