This is what greeted me this morning. I think I'll leave it until after breakfast. Current status: 291 updates [+291], 3601 new [+1]. root@chaffinch:/home/eric# aptitude full-upgrade The following packages will be upgraded:
[Code]...
xfce 4.8 will be available in testing?
View 3 Replies View RelatedI am running fully updated stretch/sid with xfce. Xastir is installed from the repos. Imagemagick was installed during the system install.
I have tried using the OSM maps, but they do not display. When I start Xastir in a terminal i get the following:
Magick: No decode delegate for this image format ().
Could not allocate canvas to hold tiles.
I've just set up an alternative testing installation starting from Jessie and I've instantly noticed that the appearance of VLC can't be set via the qt4-qtconfig application (as I've done so far in Wheezy and Jessie), in short VLC doens't respond at all to any setting changed in qtconfig .
Looking at the bug reports for qt4-qtconfig and particularly this one #564548 looks like there are indeed issues with qt4, and comment 17 states thatQt4 entered in "only security bugfixes" mode, so this won't be fixed.
I use the stable version of Jessie.I think about migrate to the testing but actually only KDE is suit for meso I need to know whether a new version of this desktop is sufficiently stable or not.
View 6 Replies View RelatedI have noticed all animated gifs in Iceweasel - Epiphany - Icedove are blinking instead of animating.anyone else have this issue? I am using XFCE on Testing AMD64.
View 2 Replies View RelatedI did an installation of amd64 testing with KDE 5 three days ago, and I noticed that my session is not restored upon login. I have this option checked at my kde system setting.
A quick search led me the next bug+patch: [URL] ....
(See also [URL] ....)
I did notice that files in ~/.config/session/ are created, but apparently not read upon login.
I tried to send a reply to the relevant bug 796062 but the email bounced back.
Having problem with latest testing and kde5 session restore?
Anyone knows where can I get the LCD cleartype patches and packages for Debian Testing? URL...
View 1 Replies View RelatedI'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....
I have installed and configured Debian testing and it's great.Now, I wanted to know how I can add or install a good spash screen while booting showing progress bar. I know, its always good to know what is happening. I still want to knowhow to do that.On searching, I only found complex howtos that I, of now cannot understand. I have already got almost every answer to my problems here on the forum.Edit: Also, how can I change sounds for login, shutdown, logout, startup etc?
View 7 Replies View RelatedI'm on Debian testing and every time I try to install Gnome I get this:
Code: Select all# alexandernst at stupidbox in ~ [18:51:07]
$ LC_ALL=C sudo tasksel install gnome-desktop --new-install
tasksel: apt-get failed (100)
I tried installing it manually:
Code: Select all# alexandernst at stupidbox in ~ [18:51:35]
$ LC_ALL=C sudo apt-get install gnome
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
Is this a problem in Debian repos (held packages) or I'm actually doing something wrong?
since few days I have installed a fresh debian testing on my new laptop, I am using XFCE4 as DE, I noticed that when I use these themes: greybird, bluebird and albatross the GTK3 applications (mostly from gnome 3 stack) do not display correctly the application. I have another laptop with an older debian testing with XFCE4 and the GTK3 themes work properly. The only relevant difference between the old computer and the new one are the video driver, the older use radeonsi driver and newest the nvidia blob binary.
View 8 Replies View RelatedI've been trying to get kdenlive to work properly the last couple of days. But I'm missing some codecs. Some Ubuntu users said that installing the ubuntu-restricted-extras did the trick for them.
View 14 Replies View RelatedI just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
2560 2608 2640 2720 hborder 0
1440 1443 1448 1481 vborder 0
+hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
I've got a desktop "konsole" shortcut that works great, it has a "konsole" icon on it that fits well.
I've copied this desktop shortcut to a taskbar shortcut (via drag'n drop).
The result is a usable shortcut, but with a wrong icon image.
I've reproduced the problem three times for different apps and obtained three times the same icon (but the shortcut is however good).
If I open the configuration popup, it displays the correct icon ...
Indeed, I found a way to change the icon : I must modify the icon of the filetype associated with "desktop" filetype ... but after a reboot, all icons will changed Strange isn't it ? have a look of the screenshot
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
I have a LMDE (Mint Linux Edition based on testing, now Wheezy) i386 that I just did a dist-upgrade on and now it isn't properly detecting my monitor resolution. I have two 1680x1050 monitors, one attached to the DVI and another to a VGA video switch. When I rebooted to the new 2.6.38-2-686 kernel both monitors were giving me 1024x768. I futzed around for a while and could then get the the DVI monitor to correctly identify the proper resolution, but the VGA monitor resolutely refused to see more than 1024x768.
I was able to get the proper resolution by entering these commands:
[Code]...
Should I file a bug report, and if so, with whom? I have to say, the Debian bug report process is not too newbie (or even not-so-newbie) friendly, but I'd like to help if it doesn't require me to hand-configure a MUA.
Also, I suppose I shouldn't mention it in a single post, but my mouse is behaving rather unpredictably now (click speed, selecting), and trying to reboot dismounts the file system and then starts up again giving me my display manager (in my case KDM), without restarting the system (both from "sudo reboot" and trying to restart with KDM or the Gnome widget). If I really want to restart the system I have to halt it first and hit the power button.
First of all - to refresh icon on desktop i've had to install gamin instead fam (after this, icons on desktop was refresh correctly). I don't know that have connection, but who knows. Anyway - my problem. Things marked as red are duplicated entries in menu. How to simple delete them? Menu are not refreshing too - i unmark "Inne" (Others) in alacarte, but it's still visible.
View 2 Replies View RelatedSince doing a "full-upgrade" using the testing repositoriesotice that before an application can display its window, I get a frame with a black background for anything up to a second. I run a PC with 4 cores of 2.4 GH each.What could be the reason for this annoying behaviour?
View 5 Replies View RelatedI tend to stay on for long time. My machine is a Fujitsu T4310 tablet. I have got all tablet features previously working properly when I was on Isadora Mint. After installing LMDE to my surprise basic features of the tablet simply worked out of the box but I'm missing a few important features like multitouch, screen rotate and buttons in tablet mode.
As far as my experience with Isadora, it needed a driver called "fjbtndrv", but I couldn't find it in the repos, moreover, I think it might need some tweeks to get it behaving properly. I found some refferences but it refers to other ubuntu based distros, which I can't use of course.
p.s. prefere a solution other than compiling it myself, it looks scary and has lots of dependencies.
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
View 1 Replies View RelatedI'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies View RelatedI've heard a lot of talk about people running 'Testing' as a rolling release version of Debian. As I have a spare box to play with, I wanted to see what this was like. I've done a minimal install of Squeeze and had a look at /etc/apt/sources.list. As I would expect, the file refers to Squeeze and not 'testing' (I think Woody used to go for stable/ testing etc, but this then got changed). In order to run 'Testing', can I just replace the Squeeze references and do:
View 6 Replies View RelatedIs there any way other than building the source for 1.1.42 and manually installing it to actually get the latest version on my Debian Testing? How long does it normally take for new versions of Wine to get into the repo's?
View 2 Replies View RelatedIs there any program for GNU to calculate CPU's performace in marks (should support multi-core CPUs)? So it will be possible to compare performance of different CPUs.
View 4 Replies View RelatedI installed debian testing (wheezy) in virtualbox as I plan on installing it on a laptop. I thought it would come with gnome 3 but that appear to not be the case. [url] Is unstable running gnome 3? Is there a way to run gnome 3 with testing or would that be a bad way to go about it?
View 2 Replies View RelatedI'm new to Debian, but because I'm used to Ubuntu and Mint, I searched in Gnome menu for a link to Synaptic, and there isn't one, so I opened synaptic from Terminal, using "synapric" command as root. I don't know if this is the proper way to open Synaptic, but when I try to install VLC, Synaptic returns the following message in a pop-up dialog box:
Please insert the disk labeled:
Debian GNU/Linux testing _Wheezy_ - Official Snapshot
i386 CD Binary-1 20110711-03:22
in drive /media/cdrom/
Debian testing still ships Wine 1.0.1. Are there any plans to update it to the recent release version?
View 14 Replies View Related