Debian :: Squeeze Won't Find Grub
Aug 23, 2010
I decided to upgrade to Squeeze from Etch.
not upgrade, but moving from etch to squeeze.
Clean new install. Format disks, re-partition...etc.
All goes perfectly well, until I reboot into my newly installed Squeeze.
After the messages from the bios motherboard, there is a black screen with a flashing cursor, and nothing else happens. Now it should have been the GRUB coming up and asking which system to boot into. But there is nothing at all on my screen.
I thought I've done something wrong during install, so I formated the disks again, and re-installed squeeze again. Just paying close attention to every message, before I went further.
And AGAIN, when rebooting into the system, there is nothing on the screen.
View 3 Replies
ADVERTISEMENT
Feb 14, 2010
I have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies
View Related
May 4, 2010
I installed squeeze with 2 drives, one for squeeze (2.6.32-3-amd64 using 120GB hdd), and one for my old winxp. I used LVM with ext4 on /root, /home, and ext2 for /boot. The install gave me grub 1.98.
When booted, screen says
Loading Grub
Welcome to Grub
View 1 Replies
View Related
Jan 14, 2011
I must be having a "senior moment".I just downloaded 'debian-sq-di-rc1-i386-netinst.iso' but I can't for the life of me find a list of Debian md5sums.I know I've done it before but I'm stumped. Sorry to be a pain.
View 3 Replies
View Related
Jan 2, 2011
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
View 1 Replies
View Related
Aug 18, 2010
I have it installed and running nicely so I am following sqlpython's "How To: Full multimedia in Squeeze" to get my various players playing. sqlpython seems to have been running a KDE environment while I am running Gnome, but that should not make a critical difference.
If I do (as root) apt-get install libdvdcss apt does not find it. Same result for libdvdcss2.
BTW, which of these would be more appropriate for my 64-bit squeeze?
etc/apt/sources.list shows:
#
# deb cdrom:[Debian GNU/Linux testing _Squeeze_ - Official Snapshot amd64 NETINST Binary-1 20100217-22:04]/ squeeze main
[Code].....
View 4 Replies
View Related
Feb 24, 2010
According to this aMSN is included in Debian Squeeze, but when I try to install it with aptitude it can't find it. it can find (and correctly installs) amsn-data. Why, and how do I solve this? I'd rather not install through other means if at all possible.
View 6 Replies
View Related
May 18, 2010
Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
View 3 Replies
View Related
Jul 22, 2011
yesterday I updated my squeeze amd64 on my Phenom X4 and now it is not booting anymore. Have you experienced the same problem?
After that I noticed the shutdown was not working anymore, it just restarted instead of powering down. This morning it wouldn't boot squeeze anymore, when grub starts and prints "Welcome to grub" (or something like that) the list of operating systems is not shown.
I noticed the updated also included grub and I saw it correctly detected my operating systems.
I am planning to boot knoppix soon and try to reinstall grub from chroot, but currently I am at work.
View 2 Replies
View Related
Mar 2, 2011
I try to install to my desktop as Squeeze/ISPConfig3 server, but GRUB does not load after several re-installations.
I have
- 6 x 500GB HDs
- ASYS A8N-SLI Bios SLI-RAID active as only then RAIDSata1-RAIDSata4 can be seen 2 x RAID1 (has to have something) and all drives can be seen by Debian-installer as individuals Same has been working with LinuxMint (both LM10 and LM Debian Edition) (with and w/o fake-RAID)
1st test: Guided partitioning (LVM) for one disk (where /boot will be separated) => Installation OK and starting.
[Code]....
View 9 Replies
View Related
Feb 11, 2011
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.
View 5 Replies
View Related
Apr 1, 2011
I need to install g77 in this distribution, but an apt-cache search won't find any match.
View 1 Replies
View Related
Apr 30, 2010
I'm attempting to install ndiswrapper-dkms package. The installation fails due to the following error:Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. dpkg reports that the source is installed
[code]....
I've been searching google for the past couple of days but haven't found anything specific. Any ideas to get me going in the right direction?
uname -a reports
Linux debtop 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 GNU/Linux
View 5 Replies
View Related
Jan 29, 2010
I just installed squeeze and at finish it asked me if it write the MBR with gurb.
I say yes, but after restarintg, squeeze doesnot appear in grub.
I also have lenny in the same PC. code...
How can I run squeeze I just installed.
View 12 Replies
View Related
Jun 4, 2011
I recently purchased a new Lenovo Thinkpad T420i and am having problems installing the latest version of Squeeze from CD. After receiving the laptop, I started it up, configured Windows 7, and confirmed everything is working correctly. Next I went through the Debian installer, which completed successfully. I'll be dual-booting Windows 7 and Debian, so at the partitioning stage I resized my NTFS partition, added a shared VFAT partition, then used the "Guided" install to create my root and swap partitions. My partition layout is code...
I assumed something was wrong with grub, so I booted the CD into rescue mode and chose to reinstall grub onto the Master Boot Record. But nothing changed. Just to experiment, I went into fdisk, deleted all my new partitions (leaving just the Windows ones), and tried rebooting, but the same error happened. I then went through the Debian installer again, being careful to set everything up correctly, but still, the device won't boot.
I'm not even getting to the grub boot screen, so something is wrong even before the point. Reinstalling grub to the Master Boot Record (grub-install /dev/sda) isn't changing anything. How can I troubleshoot this?
View 8 Replies
View Related
Jun 20, 2011
In my last installation of debian (Squezee unstable), i dont have problems with the sound.But with my new installation of squezee, when i tried to activate the volume control (With the gnome applet), the system told me this (Aprox):Volume control cant find devices to control. You dont have the correct addons of Gstreamer or sound device configurated
View 14 Replies
View Related
Jun 7, 2010
I cannot count how many times I have re-installed squeeze, and do all kinds of fixes to grub, but no joy. Every time, there is this ntoskrnl.exe error, and to re-install it. I thought my WIN XP may be corrupted, so I reinstalled it, and updated it with sp3 and all updates. Then I re-installed squeeze (reformatting all partitions). At the end, the installer ask if I want to install grub to mbr. I replied yes. After reboot, only the 2.6.32.3-amd64 and the recovery kernels show up on the grub screen, no winxp.OK, I booted into squeeze kernel and looked at the /boot/grub/grub.cfg file, and there winxp is not included in /etc/grub.d/30_os-prober section. In terminal, I typed
#os-propber and it found winxp in /dev/sda1
then I typed
#update-grub
and now /etc/grub.d/30_os-prober now show winxp.I rebooted, and winxp shows on the grub screen, and I chose winxp.It came back with "ntoskrnl.exe ...error... re-install ntoskrnl..."Here are the details:
fdisk -l
root@SHUM-AMD64:/home/shum# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
[code]....
View 14 Replies
View Related
Sep 7, 2010
I've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
why grub didn't pick up on my Windows install?
View 3 Replies
View Related
Nov 5, 2010
I'm trying to do is protect the computer against housemates. The standard procedure I do with Lenny:
1. Password protect BIOS.
2. In BIOS, always boot from hard drive. Disable booting from any other device such as USB or CD-ROM.
3. Password protect Grub (v1) using the "password --md5 $1$9MuaA/$5TDLgvmcEiCWNr5W9VaMK1" syntax in my menu.lst file.
With the above precautions in place, [I think] the only way to gain root access to the system is to take the case lid off and proceed to do stuff physically (like set jumpers and/or take out the hard drive). Am I correct? My reasoning for this is, the computer boots -> must boot from HD -> must load Grub -> must go to default menu item since others are protected, and cannot command prompt in Grub without password.
Anyhow, In Squeeze, I was a bit disappointed to find out, after doing a bit of Google-research, that Grub v2 (which is standard on Squeeze now) does not easily support password protecting the Grub menu. Am I correct? Will this issue perhaps be addressed in the Squeeze final release? Is this feature dumb anyways because the Grub password is of no use (i.e. my paragraph above is complete horseradish)?
Another thing I would like to do is change the console font and size back to something more "normal" or "classic", not some crazy tiny font that's only found in totally bleeding edge Linux distrubutions <gasp!>. I found that the Squeeze console font (e.g. when I type Ctrl+Alt+F1) is wicked tiny. I wanna change it to "normal". Grub v2 password and console font config?
View 13 Replies
View Related
May 17, 2011
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
View 6 Replies
View Related
Dec 20, 2010
i had windows 7 on my system and now i installed debian squeeze but grub does not show my windows 7 in menu for selecting how could repair this problem?
View 4 Replies
View Related
Sep 17, 2010
I have installed vmlinuz and initrd.gz (squeeze) in /boot/newinstallation and added to Grub the lines:titleNova Instalaçãoroot(hd0,0)kernel/boot/newinstall/vmlinuzinitrd/newinstall/initrd.gzNevertheless, when I choose this option at the grub, it begins to start the kernel vmlinuz and thus restart the system. The installed Debian Lenny boots in a normal way.
View 10 Replies
View Related
Feb 14, 2011
I just upgraded my laptop (thinkpad T61) OS from Lenny to Squeeze. Everything worked fine out of box except I found when I use pcmanfm or nautilus, I couldn't locate the cursor focus by typing a letter that a filename begin with. It is something I used heavily everyday and I just couldn't lose it. Since it failed in both pcmanfm and nautilus I think it might has something to do with Squeeze.
View 2 Replies
View Related
Jun 12, 2011
I had XP, Debian and F14 installed. Bootloader was the Grub from F14.
I installed F15 from DVD overwriting F14. In the new grub.conf I added:
Quote:
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
title Debian
[Code].....
View 4 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Jun 5, 2009
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
View 7 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
