I must be having a "senior moment".I just downloaded 'debian-sq-di-rc1-i386-netinst.iso' but I can't for the life of me find a list of Debian md5sums.I know I've done it before but I'm stumped. Sorry to be a pain.
View 3 RepliesWhere can I find the md5sum checksum for Ubuntu 10.10? They seem to keep it hidden.
View 2 Replies View Relatedwhere would i find the sha1/md5sum hashes for fedora14?
View 1 Replies View RelatedI want to move all files and directories that are 1 month old out to back up into a separate folder. There will be a lot of files and I want to make sure it copies properly. The problem I'm having is integrating a MD5SUM into it to check integrity. MD5SUM is not recursive, so I figured it would work in a loop when it copies each individual file, I'll do a md5sum on each file and delete that md5 once its verified it copied ok.
[Code]...
I also need some sort of error handling to output all md5's that didnt pass the hash check.
I decided to upgrade to Squeeze from Etch.
not upgrade, but moving from etch to squeeze.
Clean new install. Format disks, re-partition...etc.
All goes perfectly well, until I reboot into my newly installed Squeeze.
After the messages from the bios motherboard, there is a black screen with a flashing cursor, and nothing else happens. Now it should have been the GRUB coming up and asking which system to boot into. But there is nothing at all on my screen.
I thought I've done something wrong during install, so I formated the disks again, and re-installed squeeze again. Just paying close attention to every message, before I went further.
And AGAIN, when rebooting into the system, there is nothing on the screen.
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
I have it installed and running nicely so I am following sqlpython's "How To: Full multimedia in Squeeze" to get my various players playing. sqlpython seems to have been running a KDE environment while I am running Gnome, but that should not make a critical difference.
If I do (as root) apt-get install libdvdcss apt does not find it. Same result for libdvdcss2.
BTW, which of these would be more appropriate for my 64-bit squeeze?
etc/apt/sources.list shows:
#
# deb cdrom:[Debian GNU/Linux testing _Squeeze_ - Official Snapshot amd64 NETINST Binary-1 20100217-22:04]/ squeeze main
[Code].....
According to this aMSN is included in Debian Squeeze, but when I try to install it with aptitude it can't find it. it can find (and correctly installs) amsn-data. Why, and how do I solve this? I'd rather not install through other means if at all possible.
View 6 Replies View RelatedI need to install g77 in this distribution, but an apt-cache search won't find any match.
View 1 Replies View RelatedI'm attempting to install ndiswrapper-dkms package. The installation fails due to the following error:Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. dpkg reports that the source is installed
[code]....
I've been searching google for the past couple of days but haven't found anything specific. Any ideas to get me going in the right direction?
uname -a reports
Linux debtop 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 GNU/Linux
In my last installation of debian (Squezee unstable), i dont have problems with the sound.But with my new installation of squezee, when i tried to activate the volume control (With the gnome applet), the system told me this (Aprox):Volume control cant find devices to control. You dont have the correct addons of Gstreamer or sound device configurated
View 14 Replies View RelatedDebian 504 64bit netinst
I have the above iso.img download. But I can't find its md5sum. I have been searching around on debian.org website and have no idea where it is kept.
I have Fedora-13-i386-DVD.torrent download on;
Fedora Project Bittorrent Tracker [URL]
Finally the package folder downloaded;
$ cd Fedora-13-i386-DVD
$ ls
Code:
Fedora-13-i386-CHECKSUM Fedora-13-i386-DVD.iso
[Code]....
I checked the md5sum of the iso using winMd5Sum utility, it is OK.
To check the CD, right clicked the md5sum file in it, send to winmd5sum, and then copied the corresponding hash from the ubuntuhashes page into the bottom text box, and compared. The message box says md5 sums are different. Now the question is, have I done it correctly, I mean, is this the way to check a burned CD, OR, is there another way to check md5sum of a burned CD?
I just upgraded my laptop (thinkpad T61) OS from Lenny to Squeeze. Everything worked fine out of box except I found when I use pcmanfm or nautilus, I couldn't locate the cursor focus by typing a letter that a filename begin with. It is something I used heavily everyday and I just couldn't lose it. Since it failed in both pcmanfm and nautilus I think it might has something to do with Squeeze.
View 2 Replies View RelatedI downloaded the Xubuntu 10.04.2 Alternate Install CD ISO file from http://mirror.anl.gov/pub/ubuntu-iso...10.04/release/
When I checked the md5sum of the downloaded file, however, there was a mismatch.
The md5sum given at both http://mirror.anl.gov/pub/ubuntu-iso...elease/MD5SUMS as well as https:[url].... is 209cfc88be17ededb373b601e8defdee *xubuntu-10.04.2-alternate-i386.iso but running the command,
Code:
md5sum xubuntu-10.04.2-alternate-i386.iso generated the following, obviously different checksum for me:
098674ad5a59f0115030c5c0c3973899 xubuntu-10.04.2-alternate-i386.iso
(It also took unusually long to generate the checksum- around thirty minutes.)
Is it possible that the file was corrupted or tampered with on the server?
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have and old PC and for last years i had Debian Lenny on that and it was working great but after the Squeeze release, i downloaded the first CD image and did a fresh installation but after this it boots up with no problem (i must say since in Squeeze installation the option of creating a floppy diskette was not working properly i use SuperGrubDisk2 to boot the Debian), but few seconds after logging in, the system hangs (or maybe only the X11 since i use a historic nVidia TNT2 Riva graphic card!).
View 3 Replies View RelatedThis topic began in the Debian Development forum here I have successfully completed both the install and the after installation configuration. I have a fully functional system on this little baby, inspite of the fact that wireless (Broadcom bcm4312), ethernet (Realtek) and sound were initially broken.
There is a lot of assistance out there on the web. In the previous thread, I was having trouble installing any debian on a usb stick. The issues that needed resolving were 1. Bad stick
2. Incompatible kernels between boot.img and .iso
3. The method of copying .iso to the stick that finally worked was wget My first successful usb install was Lenny. Even though I upgraded the stock system with lenny-backports, I could not get wireless, ethernet or sound working the only connection I could get to the internet was through my 3g stick and that was not performing up to it's capability. I manually configured wvdial to get that working.
I attempted an upgrade to squeeze several times and each time the upgrade trashed the system. I finally found squeeze boot.img and .iso files from an eee pc blog. This allowed a fresh install of Squeeze and I was making progress. The little atom processor would not handle the b43-fwcutter driver, so I compiled one from the Broadcom site written especially for the atom processor. Now I had cable broadband supplied wireless. I got my ethernet working with help from the Gnome site technical specs on Network Manager. Simply changing ifupdown=false to ifupdown=true in the network manager config file.
Sound was activated by help from a blog entitled "Debian on the Dell Mini 9" My head is spinning now or I would be more specific and instructive on all I did to get this baby up and running. If anyone asks, I may do a how-to.
PS: Posted from that Dell Mini 9 running Debian Squeeze.
EDITED: Correction of typing errors.
Debian Lenny worked just great. That was my first experience of Debian. The installer recognised all my hardware and the system was soon up and running brilliantly with a few tweaks. Confident of Debian's reliability, I decided to move to Debian 6 and did a fresh install, with downloads of the new operating system rather than a distribution upgrade. The installation routines have not worked for the same computer system. I don't know if its hardware not being recognised by Debian 6 that were recognised without a problem by Debian 5??
At first, the boot-up flipped at "Waiting for /dev to be fully populated," there was a kernal panic then Debian disappeared. No signal was sent to the monitor and I had to switch off the computer manually
I was able to look into the Debian 6 OS from Arch Linux, installed on different partitions of the same hard-drive. I am able to overwrite the Debian files as root from Arch.
My i686 machine has PATA IDE drives.
Why are 2) dbus and the 3) avahi-demon failing? I need to get them started first so that I can get an internet connection and try and correct the problem with X and the wrong Nvidia driver. Is there some configuration I can do either from Arch, where I am now, or the bash prompt on Debian? Thanks in advance.
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedIn order to upgrade a machine that can not successfully upgrade to 10.4 I downloaded and burned the 10.04.1 iso image off the ubuntu alternate download site. In my first attempt I unsuccessfully burned the image with it failing at the very end. I did perform an md5sum on it and received the precise output I got from my second burn attenpt which DID complete successfully. Here is the output:
[code]...
I did research this last night and it seems the common wisdom was to reburn the iso (which I did twice) or copy down the iso again. This I also did and it came down precisely, bit for bit, the same as the first one. Here are the two cksums
[code]...
Is there something wrong with this image on the website or is the error about 1 file being unreadable (could that also mean missing?) be erroneous?
My laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies View RelatedI go to the image site for ia64 (given that my machine has an Intel Atom N450) and put the mini.iso and netboot.tar.gz files on the key, then plug it into the machine and attempt to boot. It doesn't get recognized.
View 4 Replies View RelatedOn my squeeze OS I have texlive-latex3 installed and I wanted to install revtex package of the American Physical Society. While trying to install I was prompted to run #unzip revtex4-1-tds.zip -d /usr/local/texlive/texmf-local/ However my machine does not have /usr/local/texlive/texmf-local/ Instead it has /usr/local/share/texmf/ Will it be all right if I insert this location after -d ?
View 1 Replies View RelatedUsed to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
View 5 Replies View RelatedCan't understand what's going on... Running 'apt-get update' I see that diffs are downloading with a normal speed (11.3 Mbyte by 49 seconds = ~ 227 Kbyte/sec - it's OK, my 'up' limit is 384 Kbyte/sec). But - running 'apt-get dist-upgrade' I see that packages are downloading w/ around 4000 byte/sec. WTF? What's the difference between downloading packages' diffs and packages themselves?
I've changed 6 mirrors - from oficcial (ftp.us.debian.org) to local (ftp.mgts.by). I've tried netselect-apt - no result. Still normall speed on 'apt-get update' and terrifying speed on 'apt-get dist-upgrade'.
Are there any special steps I'd need to take to install Squeeze AMD64 on a server with two quad-core Xeons? I had no issues installing Server 2003 x64 and XP Pro x64 on the box, but I seem to remember seeing something somewhere about XenServer in the kernel images.
View 4 Replies View RelatedI installed sqeeze on a netbook. Having no optical drive, I created a usb install disk with unetbootin on a laptop running Squeeze stable and the "Debian 6.0.1a DVD 1" iso. Much to my suprise it installed KDE. I expected, and wanted, Gnome. At the tasksel section I checked off "Graphical Desktop Env", "Laptop", and "Standard Sysytem Utilities". I found a similar post regarding this: viewtopic.php?f=17&t=60040 But in this case the OP installed with a netinstall iso and concluded a faulty mirror was the cause. This doesn't make sense in my case as I was using a DVD image which contains, afaik, Gnome, XFCE, and KDE
There surely must be a way to explicitly choose which desktop env. one wants installed. I realize this can be done by doing a base install and using apt-get; but I'm thinking there must be a simpler way using the installer. I tried the "Expert" install and only saw the generic "Graphical Desktop" option again. I figure I must be missing something somewhere. Also, can I get apt-get to recognize my unetbootin stick as a source to fetch from? I tried apt-cdrom and different entries in sources.list but I can't figure it out. It seems wasteful to me to download hundreds of MBs of packages from a mirror when I have them locally.
Trying to install squeeze again and everything has gone ok including network connection & partitioning & retrieved 916 packages from mirror.
But now installation has stopped completely at: Configuring ca-certificates
And will not proceed further.