Im trying to setup SYSCP, only to use to make my life easy, and not commercial.When adding a ftp account, the folder it not created, allso there is no files created in the site-enabeld folder when adding domains.Im guessing is it something whit access from the php, but what should i change?
View 2 RepliesIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have a server running Red Hat Enterprise Linux ES (2.6.9.55.ELsmp). When it starts up I get the following error: Uncompressing Linux... Ok, booting the kernel. Red Hat nash version 4.2.1.10 starting WARNING: can't access (null) exec of init ((null)) failed!!!: 14 unmount /initrd/dev failed: 2 Kernel panic - not syncing: Attempted to kill init!
After that I got no response from the OS. I have the installation CD, so I tried to start the rescue mode, while going through the steps I received an error stating that mounting to /mnt/sysimage failed and that if I want to I can access a shell. I really don't know what to do from here
I have used this guide to install kernel in my linux cyberciti.biz/tips/compiling-linux-kernel-26.html stage 1 worked perfectly. Now at stage 2 when I write the command dir/ls in the tmp directory I see the file: linux-2.6.26.tar.bz2 (2.6.26 is the version of my kernel) And now if I try to the tar function on my file and write it like this: Code: tar -xjvf linux-2.6.26.tar.bz2 -C /usr/src it gives me couple of errors like:
tar: bzip2: can not exec: no such directory
tar: error is unrecoverable: exiting now
tar: child returned status 2
tar: error exit delayed from previus errors
I have this project and it needs me to write a programe that will interface with a hardware device thruogh the parallelport.I did that, but I feel i might be using the wrong commands because when runing it i get a segmentation fault or a 'changing ownership of file ; operation not permitted.
View 2 Replies View RelatedIn order to allow me to shutdown my PC from within fluxbox without being root I ran "visudo" and added the following line:
Code:
psionl0 ALL=(ALL) NOPASSWD: ALL
A check that the line had been accepted showed all ok:
Code:
bash-4.1$ sudo -l
User psionl0 may run the following commands on this host:
(ALL) NOPASSWD: ALL
Yet when I tested it out, I got nowhere:
Code:
bash-4.1$ sudo pkgtool
sudo: pkgtool: command not found
bash-4.1$ sudo shutdown -h now
sudo: shutdown: command not found
bash-4.1$
Have I done something wrong or isn't sudo meant to be used this way?
I am new to linux and would like to allow a user to use SUDO to change password and also delete/add members to a group without signing in as root or using SUDO. I think you do this in visudo but I dont know the commands to do this.
View 4 Replies View RelatedI'm running a server using CentOS 5 x64 I want to disable access of groups to "bin" folder so they cannot execute commands. [info: actually because of a bug in cPanel (the control panel I installed) Perl will give access to all hosting users to execute commands.] so what i wanna do is to ban some groups on 'bin' folder, for example 'my_group1' and 'my_group2" cannot access bin but 'my_trusted_group' can access it.
View 1 Replies View RelatedI have installed Oracle Enterprise Linux Server 5 as host OS and Windows XPP(Guest OS) as virtual Machine by VMWare Player on standalone Desktop PC.Now I want to run all commands of Linux from Windows XPP.How should I proceed?
View 2 Replies View RelatedHow to allow access to some commands having root privleges to be run by non root user. I am new to unix/linux and I have a major assignment. I have to find ways to run particular commands which can be run only by root from a non root user. I know sudo is one of the way but i need some different approach.
View 8 Replies View RelatedI'm running a server using ubuntu 10.04 x64. I want to disable access of groups to "bin" folder so they cannot execute commands.
[info: actually because of a bug in cPanel (the control panel I installed) Perl will give access to all hosting users to execute commands.]
So what I wanna do is to ban some groups on 'bin' folder, for example 'my_group1' and 'my_group2" cannot access bin but 'my_trusted_group' can access it. How is it possible?
since a recent upgrade to Mandriva 2010.1 I am not able to 'sudo' as administrator or when I use the 'root' password. I am the only user on this machine (Dell Inspiron 530S multi-booted with Window's Vista Home Premium, Ubuntu 10.4, and Mandriva 2010.1). I can get into the 'Manage Users' section of the control center by authenticating as 'root' but I can't access 'sudoers file' from command line.
View 4 Replies View RelatedThe panel plugin from xfce4-mixer has a bug:s icon doesn't update as the volume is changed. This bug has already been reported.One curious thing about it is that, if you right click on the volume icon on the panel, go to 'Settings' (or 'Properties', I don't know, mine is in Portuguese) and then close the window that pops on the screen, the icon is updated.Is it possible to open and close the settings window automatically with a bash script? Like this, I could associate this script with the volume keys of my keyboard, so that the icon is updated as the the volume is changed.
View 2 Replies View RelatedHow can one have commands in cron? I do not know much but do know that there is something called cron. I read the manpage[quote=Cron Debian Man page]cron - daemon to execute scheduled commands (Vixie Cron)[/quote] and it says to make files in /var/spool/cron/crontabsWhile I went to /var/spool/cron/crontabs I did not find anything there. I just want to tell cron that it runs $sudo aptitude autoclean at some time in the background. Is this possible? If yes, then how ?
View 5 Replies View RelatedI'm messing around with a new install of Debian 8, trying to get a sandbox of Oracle DB 12c up and running in an ESXi environment.
open-vm-tools was giving me troubles (resizing the window didn't make the resolution change), and Oracle DB was fighting me with environmental variables.
Well, while I was troubleshooting the Oracle issue, I needed to reboot. When it came back up, I couldn't log in. When I attempt to log in using known working credentials, the screen goes black like it should, and then loads the login screen again.
I SSH into the box and try to run commands, but every single command I run returns "Command not found" including "ls" "su" "cd".
I'm able to boot into recovery mode, where the commands work under root, but I'm not sure what to fix....
Two nights ago I was trying to diagnose what was wrong with my internet connection. I couldn't get web pages to load, IRC and ssh weren't connecting, and email wasn't downloading (I still use POP3). I didn't know what to use to check my internet connection. I did a ping, but I didn't know how to interpret the results. So without the internet, I was totally blind.
Are there documents anywhere which install with Debian which I can search offline when my internet connection dies?
last time i used debian it was missing some commands that were necessary for the stuff i was trying to install on itdebian has no software repositories (not as extensive as ubuntu but i guess thats why its so user friendly) and finding depencancies that are up to date is really hard seeing as though that the ubuntu site says is out of dateone of the commands that i really wished was on there was the MAKE commands like make
make installnd i guess there are other make commands but is there an easy way (i am more than willing to try it the hard way if i have to)
I have installed debian 8 on acer aspire one, all run well but when i do the Command's VT320, i have errors with HTTPS protocol ! Since the browser Iceweasel, the connexion of web sites HTTPS work well ! This is the sample of "apt-get" with google Chrome :
Code: Select allroot@sta-krups:/home/phipo# apt-get install chromium
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
chromium-l10n chromium-inspector
[Code] ....
I have checked if the problem is with Openssl, the server is installed, and work well.
I use two separate systems both running Debian 8. On one (my main) I can't do some commands including ping, shutdown and reboot without running them as root user, however on my other system I can ping and reboot as a non-privileged user. The permissions on both systems are the same for /bin/ping and /sbin/systemctl (reboot). I thought at first it was something to do with what groups my main was in, but that doesn't seem to be the gase.
I know I can fix it by setting setuid for both, but my question is why is it different on both machines? Is there a global setting controlling this in /etc or perhaps an icmp setting?
I'm not really new to debian. Just never encountered this before. I'm not even sure how to describe that. The first time I realized something was wrong when I tried to create a file with dd:
root@strych ~# dd if=/dev/zero of=1GFile -bs=10M count=100
dd: bad operand `-bs=10M'
I mean what, I've done that many times before! Then I noticed that some commands started to behave this way:
root@strych ~# ls --help
--help: No such file or directory
On the other hand...
root@strych ~# fish --help
fish - the friendly interactive shell
or
root@strych ~# apt-get --help
apt 0.8.6 dla i386 skompilowany Oct 4 2010 11:55:22
Usage: apt-get [options] command
apt-get [options] install
So what the hell is wrong with my shell? This is persistent with any type of access: both ssh and local (physical), it's the same when I use sh, fish, bash or whatever. It also doesn't matter which user I'm logged in with. I haven't changed .profiles or anything concerning terminal really, besides installing fish but even that was long before I realised this problem. Actually, I can't think of anything that I've done that could do this. What am I missing? The system is debian testing with kernel 2.6.32-5-686.
I want try clean compiled linux kernel on system, I want see what can I do with clean linux kernel. I want just on clean partitioned hdd, put grub and linux kernel and then boot it up, so what then I get? Can I input commands like ls?
View 5 Replies View RelatedWith ubuntu it was possible to clean packages with the commands
sudo apt-get autoremove
sudo apt-get autoclean
All not necesseary packages were removed. Packages who didn't no longer has a dependency were removed.
Can this also be done under Debian?
When I try to run programs from root terminal I get the error
Code: Select allQDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
No protocol specified
kate: cannot connect to X server :0
I found a solution: I do
Code: Select allxhost SI:localuser:root
but I have to do it after each reboot. I tried to put this command in rc.local but it did'nt work. How to do this auto?
I have debian lenny, when I run an application is slow to load (example: iceweacel open and it takes, I can hold him iceweacel work normally), I tried to change from gnome to another and the same thing, went down some services (samba, squid) and nothing. I open a terminal and it takes, I want to duplicate it and do it fast. From a terminal without X (tty1) with root run mc and moves quickly, also run as root "sudo mc" and takes to boot.Any action done with sudo it takes to run.Can not be what it takes to make starting the applications, not the PC because it is new, and from one moment to another I began to pass this
View 2 Replies View RelatedI've read through your forums and done a bit of googling to see that an automated reboot at a certain time has something to do with cron jobsMy second task is then to run commands like the following command when the machine starts up again...screen -t s5 ./srcds_run -console -game cstrike -port 27025 +ip xxx.xxx.xxx.xx +map de_dust2 +maxplayers 11 -tickrate 100 -autoupdateit seems to me I need to edit the rd.local but when I open my file I don't really understand where I need to insert my command
View 6 Replies View RelatedI wanted to change authentication options in
1) /etc/pam.d directory files common-password, common-auth, common-account
2) /etc/login.defs - PASS* fields
I know the fields that need to be changed but what I could not find was
a) commands that change these options similar to useraddusermod and so on but those which can change system wide settings
b) API that can change these options (C API)
I have almost accepted that there in fact aren't such things. You have to manually update the files. I would prefer not though.So I am asking here as last attempt to find such commandsAPI. Please let me know if they are available.
An unknown error has occurred. Subject 'testing', Account: 'abc@xxxx.net', Server: '202.177.x.x', Protocol: SMTP, Server Response: '451 unable to exec qq (#4.3.0)', Port: 25, Secure(SSL): No, Server Error: 451, Error Number: 0x800CCC6A
View 1 Replies View Relatedizzit possible to use a php exec function to trigger a jar file using -java method?ters/new.png"');However when I run the index.php, it doesn't trigger action.Instead when I run this code in the terminal, it works perfectly well.So is there any configuration needed to perform such action?Oh btw I'm using XAMPP in linux ubuntu and CBSim.jar to convert some images.
View 2 Replies View RelatedI have two breakpoint b1 and b2, and I deinfed scripts s1 and s2 to exec at break time. how to make s1 autorun when b1 was hit?
View 1 Replies View RelatedI have a server in which I'm trying to install Debian into. There's no BIOS, only EFI boot. The vendor locked it down so there's no way to see it or get into it.
The Wheezy 7.8 netinst CD has EFI boot parameters and works on everything I throw it in, except this one server. Booting it up, the code doesn't see the EFI and boots into normal mode, negating every chance to install it (dozens upon dozens of failed installs).
During boot, I press the [TAB] at the Debian Linux installer menu and get the load parameters (/install.amd/vmlinuz vga=788 etc). What parameter can I add to this line to get it to run in UEFI mode so we can install it?