I'm currently running 10.04, when I went to go turn on visual effects it gave me a prompt to install an nVidia driver, after installation was complete it said I had to restart. When I start it up the screen flickers from being on and off, it then finally stops at being on but nothing shows up. Please help. My graphics card is nVidia G210M. Sony Vaio.
View 4 RepliesI have new hardware and I'm doing a dual boot, hoping that Ubuntu will be my primary OS, but I'm having trouble ringing it out. I installed Ultimate Edition 2.6.1 and in the past with an old machine I could turn on visual effects. With this machine, when I try to, it says it's looking for a driver, blinks a bit and then comes back with a message saying "Desktop visual effects cannot be enabled."
I assume that I don't have the nVidia driver loaded. When I go to Hardware Drivers, it says "No proprietary drivers are in use on this system." In synaptic, the latest driver does not show up. I followed the instructions on this site that someone put up which required adding some lines to the "Blacklist" then purging old drivers. It said to expect an error and what to do then, but I never got the error. When I tried to do the rest of the commands anyway, nothing seemed to happen. One of the steps was to download the latest driver, which I did. It was a .run file...........
there I turned on my Visual Effects to Extra or Normal and when I do that both the top and bottom taskbar goes away. The only way I can get them back is to turn visual effects off. Does anyone know how I can fix this issue?
View 2 Replies View RelatedCan't turn Visual effects?
View 4 Replies View RelatedI want to enable extra visual effects on my Laptop but when I select it a windows pops up saying 'Desktop Effects could not be enabled'
explain it in dummies terms i am 14 and just learning the basics of linux
I'm running Karmic on an Acer Aspire AO751h and very aware of the issues regarding the GMA500 ans psb drivers, and after reading all the forums I've finally accomplished to make it work just fine. Last week it performed an update via the update manager and since then I haven't been able to restore/run any of the compiz settings and found out that the problem is that it doesn't let me turn on my visual effects under the appearance settings. When I attempt to set them as normal or extra, it starts "searching for available drivers" then the screen blinks several times, goes black, hides every window and just shows me my desktop background and then come back again and displays "Desktop effects could not be enabled". As I mentioned before, Compiz was running fine and I had no issues with the visual effects prior to the last update perfomed a week ago. Can you help me please?? If you need further information I'll be more than glad to provide them tou you, this is driving me nuts!
View 2 Replies View RelatedI've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
I've just finished my new build and installed Ubuntu 10.04 LTS.I have in it an MSI N8400GS D512D3H (NVidia Geforce 8400GS) which I thought would work for Ubuntu. After installing Ubuntu the visual effects are disabled, can't even get "Normal" settings in the Appearance dialogue. Updates have all been installed. Apt has been updated. "Hardware Drivers" screen draws a blank. No proprietary drivers listed at all. First time I've actually used a Graphics Card in an Ubuntu install.
View 6 Replies View RelatedWhere can I see which buttons create the visual effects (Nvidia)? eg. cube .
View 2 Replies View RelatedI just downloaded and installed the latest version of Ubuntu on my laptop. After installing the drivers for the visual effects I restarted the computer, and now after the all black screen with the little white Ubuntu symbol in the middle the screen goes blank, lots of horizontal lines appear and it contrasts out to a completely blank, white, useless screen. Any suggestions? EDIT: laptop is a Toshiba 5105, bumped up to 1.2gb of RAM
View 5 Replies View RelatedYour Refresh Rate and Outputs HAS TO be the same freq as your monitor.This overwrites whatever you have set in NVIDIA X Server Settings.I use this on my laptop with an NVidia 8400GS card and on a Revo 3700 (with NVIDIA ION) through SMPlayer and XBMC.You can have choppy free and 'tear free' playback AND visual effects on!
View 3 Replies View RelatedI have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
Can't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies View Relatedim using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies View RelatedI just installed Fedora 11, and am trying to install my video card drivers. I have an Nvidia geforce gtx 260m. So far I have installed both the kmod-nvidia and akmod-nvidia packages, and I still cannot enable desktop effects. After i installed the akmod package, I sometimes see the nvidia logo for a split second when I log out, but my drivers are still not correctly installed.
View 9 Replies View RelatedI like the Visual Effects tab feature. I noticed that is gone from Ubuntu 11.04 and subsequently from distros based on it such as Linux Mint 11.The image attached is of Ubuntu 10.10. How would I get the None and Normal effect settings in Ubuntu 11.04Linux Mint 11?
View 5 Replies View RelatedI am having a bad slowdown issue when I enable Visual Effects with the Ati proprietary drivers that come with the installation. Everything runs very slow maximizing and minimizing take about 3-5 seconds per click and the effects get all choppy and don't look right like they did on my x1950 video card. I have tried downloading the current drivers from the ATI site but they don't seem to be initialising correctly after I perform the install.
I also know that the graphics card is not the culprit as it works perfectly fine on my Windows 7 64 bit install. There is no reason that my video card cannot handle the Visual Effects as it is a 1GB 4890 should have more than enough horsepower.
My machine is:
AMD Phenom II 965 Black Edition
8 GB G. Skill 1600 DDR3 Memory
1 TB Western Digital Caviar hard drive
1 GB 4890 Graphics Card ATI.
I have acer 5738 laptop running on ubuntu 9.10...my problem is the visual effects are not being enabled.
View 1 Replies View RelatedJust installed an ATI Radeon 9500 Pro graphics card (128 Meg). Linux just seemed to work fine with it - I didn't need to install any extra drivers or anything.
Before, when I was using onboard graphics, if I tried to choose "normal" or "extra" visual effects, it told me that I didn't have sufficient hardware. Now, since installing the card, it first said "installing drivers" then a message came up saying "do you want to keep these settings .... respond in 30 secs etc...
I chose yes to keep settings but when I close "Appearance preferences" it does not retain my settings and no visual effects are activated. If I open up Visual effects again the check box next to "none" is ticked.
I looked around and there seem to be drivers available direct from ATI but are these newer than those available already on Ubuntu 9.10? It is very confusing. It seems that I have might have to uninstall existing drivers before I can install new ones and I am reluctant to do that because - at the moment, apart from visual effects, everything works And would doing this even help anyway?
In fact has anyone succeeded in getting a Radeon 9000 series card to show visual effects in Ubuntu 9.10 or should I stop wasting time and assume that it is not up to the job? I can live without visual effects (although it would be nice)
I have 1 GB ram,256 MB graphics. I installed ubuntu 10.04. first I was able to change visual effects. Now I am not able to do that.
View 1 Replies View RelatedMy Acer laptop Travelmate 290 was fine till yesterday (ie) before full update.No Error.I have the recent Ubuntu. Later When I boot I can't find my cursor but I could randomly see pop up notification of Application----Places--- System could be read.When I open any folder its fixed to top of the screen and no button for minimise,max and close.When I dig thro all the forums and solved by reinstalling metacity and change the setting of Appearance-Visual Effects to Normal.When I set to Normal it scans for the driver and asking me to confirm the setting.Once confirmed all the above problems solved but it don't reatain it,it is jump back to none. I need to do this on every boot.Is any way to avoid this? Is anyway to clean all the compiz files and setting from the PC?I vaguely remember it may be because of uninstall of compiz.
View 2 Replies View RelatedI just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
Where can i change visual effects in 11.04. In previous versions i could do it under apperances?
View 7 Replies View RelatedI'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
View 9 Replies View RelatedProblem with the Visual Effects under Appearance is grayed out. The options were available until after removing Compiz. Is there a way to restore back to the original setting of ubuntu 10.10 prior to installing Compiz?
View 9 Replies View RelatedA few hours ago I upgraded my system, from Karmic to Lucid and I'm glad with it.But I have a problem, (two actually, I posted the second in other thread), Gnome is not remembering my Visual Effects configuration. I mean, I select the "extra" option and when reboot, it's back to "none".It will be a pain having to edit this every time my laptop starts.
View 2 Replies View Relatedi have ubuntu 10.04 installed on my pc but when i try to open visual effects on as normal or extra my pc stoped and must restart my pc manually same problem when enter on live cd same problem with 9.10 only but when try kubuntu 9.10 work normal
View 8 Replies View RelatedI have recently updated to Ubuntu 10.04 (version of Gnome Desktop environment: 2.30.0, version of Linux kernel: 2.6.32-21-generic).My problem is that when I try to enable "Visual Effects", I receive an error message: "Desktop effects cannot be enabled". When I attempt to enable Visual Effects, my system starts searching for external device drivers but finds none. I don't believe that the source of the problem should lie in my graphics card (I have a DELL Inspiron 1545 notebook with an Intel Graphics Media Accelerator 4500MHD graphics with up to 1750 MB of dynamically shared memory allocated by the system). With the earlier version of Ubuntu, the 9.10, I didn't have this problem.
View 2 Replies View RelatedI am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
View 1 Replies View RelatedThe hardware devices drivers list three different types of drivers onboard including what appears to be the latest one with accelerated graphics capability. When I try to improve the visual effects to 'extra' it keeps telling me there's an error. I've tried improving the effects with all three but still getting the error.
View 6 Replies View Related