Debian Multimedia :: Settings Were Not Saving Through Reboot
Sep 9, 2010
Initially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
View 14 Replies
ADVERTISEMENT
Dec 25, 2010
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies
View Related
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
Apr 1, 2011
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies
View Related
Jan 4, 2010
My system (Ubuntu 9.10 Gnome Desktop) keeps 'forgetting' my sound settings. every day I have to go into sound preferences and select a different hardware device setting and then change it back to the right one in order for it to work. For instance my sound goes out of my onboard intel based sound via optical to my amp and so the hardware setting for this is IEC598 output + analog stereo input But everytime I boot their is no sound (and hence no light coming through the optical cable) so then I'll change it to Analog surround and the light comes out so then I can change it back to the 1st setting and it works again. Hope that makes sense, I have had this problem and also my video settings have been 'forgotten' and samba also won't work ever since about 4 days ago when the system updated, everything was working fine before that (i have run update manager since and everything is up to date)
View 2 Replies
View Related
Nov 19, 2015
I've just installed Debian 8 XFCE and I can't get the sound working properly after a reboot. I mean I can but it keeps resetting to default audio output (analog-stereo) after reboot.
I set it to Digital Stereo in Pavucontrol settings, reboot and here comes analog-stereo again.
I've tried setting digital stereo as default using pactl in the terminal but same problem. When I change settings then relog in my session, sound is working, but when I reboot it reverts back to default output. Strange.
Here's my sound card info :
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
View 1 Replies
View Related
Oct 18, 2009
I am running a debian squeeze machine on a ibm t40 laptop with window maker as my window manager. I am using gpointing-device-settings as a program to get the scroll bar on my touch pad working. unfortunately, I can't get the settings to stick after i shutdown and turn on. I have to go into the program and unclick then reclick the button. i'm using version 1.3.2 (ive tried both deb and source versions). does anyone have any ideas on how to fix this? and if there is any configure files that I could configure instead of having to use the gui program.
View 4 Replies
View Related
Feb 13, 2011
This is more times I have encountered, with my browsers - Epiphany, Iceweasel,. GNU/Linux Debian SID. Though it is not consistent - on and off. I don't know how to recreate the environment. But though it says, it is downloading but when I go to the folder/directory, it's not there....this is frustrating as sometimes my download takes a while to find out that after it download, nothing is there. litterally nothing.Maybe it's in a temp folder but I don't know where to look for it -- (Epiphany).
View 2 Replies
View Related
Mar 15, 2016
I did an installation of amd64 testing with KDE 5 three days ago, and I noticed that my session is not restored upon login. I have this option checked at my kde system setting.
A quick search led me the next bug+patch: [URL] ....
(See also [URL] ....)
I did notice that files in ~/.config/session/ are created, but apparently not read upon login.
I tried to send a reply to the relevant bug 796062 but the email bounced back.
Having problem with latest testing and kde5 session restore?
View 0 Replies
View Related
Mar 12, 2011
This is my last attempt at solving this issue before I have to return to windows as I need to contact family via web. I am unable to connect to the wireless network at home since upgrading to Ubuntu 10 desktop. It worked fine on v9. I reinstalled a full U 10 version but same issue. I am trying to enable wireless in the file mentioned as this seems to solve most posters issues but for some reason when I reboot it loses the update. I've tired logged in as su and sudo i but no joy.
View 5 Replies
View Related
May 11, 2011
using ubuntu 10.4, have set a custom command to open my browser to a page using the following in System -> Preferences -> Startup Applications
Code:
chromuim-browser -kiosk http://wallboard
this works, but only for the next restart, any subsequent restart, and this 'application' has vanished from the list...
how do i add this 'application' as a persistent entry, not just for the next restart.
View 5 Replies
View Related
Apr 29, 2010
I've installed Lucid, and so far the only problem I'm having repeatedly is that my appearance settings aren't saving. Every time I reboot I have to change the visual effects from "none" to "normal", whereupon it searches for drivers and changes the settings. Any ideas what could be causing this and how to fix it?
View 9 Replies
View Related
May 4, 2010
I followed the instructions for installing Gsynaptics on 10.04 to configure my touchpad and it seems to be working. except, something seems to override my settings whenever I close Gsynaptics or after about 10-20 seconds has passed.
Mainly, all I'm trying to do with it is use it for a simple way for me to turn my touchpad on and off since it's overly sensitive and causing problems. Does anyone know why gsynaptic changes may not be sticking?
View 3 Replies
View Related
Jun 17, 2010
I've been playing around with my gnome set up and getting it to look nice, but every time I log out, it messes itself up in just a couple of ways. I saved the session, but that doesn't appear to be catching everything. The problems I'm having -I disable trackpad clicking with "sudo trackpad notap", but I need to reenter this every time I log in or it's turned back on again.
No matter what I do to screenlets, I can't seem to get it to remember that I only want ONE picture frame on my desktop when I boot up, and only ONE CPU monitor. It instead boots up 2 and 3 respectively.I have set stickynote to open up automatically, but it never boots up to the screen, only the panel above. I then have to double click on it to get it to open.Is there a way to save not just the session but every setting you've got running currently on a Ubuntu machine, and then load them automatically when you boot?
View 2 Replies
View Related
Jun 23, 2011
I have two monitors. One on my laptop, and one hooked into the VGA port on the laptop. I want to use these as an extended desktop.
I can set everything up correctly, but after I reboot, or shutdown, all of those settings have to be manually put in again. This is consistent.
how to get these settings to be permanent?
View 1 Replies
View Related
Feb 10, 2010
I've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
View 4 Replies
View Related
Sep 3, 2009
I am running F11 and would like to use ccsm to modify compiz settings. However; when I modify any settings in ccsm they do not seem to take effect at all. I have tried rebooting etc. I have checked the file /home/*username*/.config/compiz/compizconfig and all that's in there is:
[gnome_session]
backend = ini
profile =
View 3 Replies
View Related
May 2, 2010
so I just got 10.04 installed. My settings anyway for compiz and appearance are not staying "saved" after I shut down then log back in. For now, I just say save sesssion under the startup menu. how to make this work?
View 6 Replies
View Related
May 24, 2010
I recently installed Ubuntu, 10.4
My problem is that when i log in, the resolution isnt what i want. So i change it via the Nvidia x server settings, and press Save to x config file
Yet when i log in again, it defaults back to what it was before i changed it?
Iv looked all over the internet for the past 2 days and nothing seems to work.
View 6 Replies
View Related
Aug 26, 2010
I'm using Ubuntu 10.04 64-bit and I'm having the following issue: a lot of the programs I use seem not to be able to save their settings on shutdown (Visual Paradigm for UML, for example. Kile is another one). This happens only for some of my programs. What is causing this? Have I installed them in an inappropriate location? (e.g. VP is in /opt). I also have this problem sometimes with system settings (screensaver reverted to old value upon reboot once, but after that it worked...).
Edit: Just noticed running as root doesn't work either, I rebooted and it's back to square one
View 1 Replies
View Related
Jun 28, 2011
Ok, let me explained what I did. I was curious and decided to try out Gnome 3. Big mistake. I did a purge to get rid of it and now Unity comes back up. So far so good. Now none of my settings save... my "keep in launcher" apps do not stay there, my settings (accounts work fine) in Empathy don't stay and the weather settings reset. How do I get things to save when logging out or rebooting?
View 4 Replies
View Related
Jan 26, 2011
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
View 1 Replies
View Related
May 24, 2010
Over the last two months I've been trying out Ubuntu 10.04 32bit using Wubi under my current Windows 7 32bit OS, and I'm at the point where I want to reformat and partition my HDD making Ubuntu my main OS (with a very small partition for Windows 7 on the side for certain things).I was just wondering if it is somehow possible to export all my current settings and preferences for my current installation of Ubuntu so that once I've reinstalled it, I can import them and everything will be the same as it is now (I hope that made sense...).I'm not too fussed about reinstalling apps and things, just all my current settings and preferences.Oh and also, (this might not be the place to ask, but I know you'll probably be able to answer this as well) is there anything I can use to do the same export/import process with my Windows 7
View 3 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up.
View 1 Replies
View Related
Jul 30, 2010
When I reinstall my distro (MEPIS, for the last 2.5 years), making my new user account preserve all the old account's settings has always been a difficult and very messy process, especially if I have installed a new copy on another partition. (I'm doing that soon, so I have this copy as a backup until I have everything the way I want it on the new copy.) Most of my stuff gets saved, but not everything. The biggest problem is that, even if I select "preserve data in /home" in the MEPIS installer, my keyboard shortcuts become unusable (not completely erased) under odd circumstances. They're still listed in file /home/josh/kde/share/config/khotkeysrc, but they still can't be used, and I have to open hhotkeysrc and manually delete them and then reenter them in the menu editor (the K menu, by the way, gets completely overwritten).
I can't just overwrite the entire new user account with the old one; I've tried, and something goes wrong so that the new account can't be opened (probably because some important files are inaccessible--I can't tell which ones they become inaccessible).Anyway, is there a program that can preserve all the user account settings neatly for a new installation of the distro? I am supposing there is a program or at least a method, because I never hear others complaining about this problem. I probably don't know something I should know.
View 4 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up
View 3 Replies
View Related
Nov 29, 2010
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
View 1 Replies
View Related
Sep 3, 2011
i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies
View Related
Feb 17, 2015
Each time I reboot I get an additional display of items.
After one reboot:
two user menus
two desktop selection displays
two application menus
...
two open applications showing in system tray
After two reboots:
three user menus
three desktop selection displays
three application menus
...
three open applications showing in system tray
After five reboots:
Six user menus
Six desktop selection displays
Six application menus
...
Six open applications showing in system tray
How can I reset this? I have been using ubuntu for a while, but switch to debian for more stability. I am not very familiar with debian graphics or gnome desktop.
View 1 Replies
View Related
Dec 23, 2014
I have a user who has recently switched to Debian 7 (from Windows). While reinstalling his PC I foolisly went straight to install the ATi proprietry drivers (as every computer I have come across this in this building is running with an ATi card). Once install I found out that the computer actually had on board Intel Haswell graphics. So I installed the correct driver and uninstalled the ATi one. Since then System Settings refuse to open they are forever "Starting". The user is running on Gnome Classic as Gnome 3 refuses to start (in what I am starting to suspect is a linked issue).
Running "gnome-control-center" from the command line details the following error:
(gnome-control-center:4583): Gdk-WARNING **: The program 'gnome-control-center' received an X Window System error.
This probably reflects a bug in the program.
The error was 'GLXBadContext'.
(Details: serial 158 error_code 171 request_code 154 minor_code 6)
(Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
View 2 Replies
View Related
