using ubuntu 10.4, have set a custom command to open my browser to a page using the following in System -> Preferences -> Startup Applications
Code:
chromuim-browser -kiosk http://wallboard
this works, but only for the next restart, any subsequent restart, and this 'application' has vanished from the list...
how do i add this 'application' as a persistent entry, not just for the next restart.
This is my last attempt at solving this issue before I have to return to windows as I need to contact family via web. I am unable to connect to the wireless network at home since upgrading to Ubuntu 10 desktop. It worked fine on v9. I reinstalled a full U 10 version but same issue. I am trying to enable wireless in the file mentioned as this seems to solve most posters issues but for some reason when I reboot it loses the update. I've tired logged in as su and sudo i but no joy.
View 5 Replies View RelatedI've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up.
View 1 Replies View RelatedInitially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
Been using gv and vi to build a postscript file. Now I would like to save the output of the program to a disk file. My problem is I can't figure out how to "print to a file".
View 2 Replies View RelatedI have a nice script that I've placed in the Startup Applications that open some windows for me when I reboot the computer and login. But when I connect remotely via RDP it runs this script too... and that isn't desirable. Is there a way I can prevent the script from running when I login through RDP?
View 2 Replies View RelatedWhile recently tweaking my system i deleted some startup applications from System->Preferences->Startup Applications. Now my themes and some other settings are not showing up while I login.
here the default set of startup application entries that come when you do a clean install? I am using Ubuntu 9.10 64bit
PS: If there is any work around to reset.
I tried to put a terminal in the desktop using more or less the procedure described in this article:
[URL]
It worked fine, but then I installed avant-windows-navigator and I think it created some conflicts with compiz and other applications.Both the desktop terminal and Skype started to appear in duplicate when I logged in. So I went to the startup applications menu and disabled them both. When I logged back in they both appear only once, but the terminal is in the wrong spot in the desktop.So there are probably some startup registers somewhere that are causing this.i've tried reinstalling compiz and I uninstall AWN and it didn't work.
I've just moved to Ubuntu and using Linux on the desktop in general. I use RHEL on a daily basis for work so don't really have much experience with window managers etc but like to understand how I'm doing what I'm doing. In that regard, I've configured a couple of scripts to be run when I login using 'System -> Preferences -> Startup Applications' but what I want to know is where do these settings actually get stored within the file system?
View 3 Replies View RelatedI'm having a hard time with my xfce netbook. Yesterday i was adding Tomboy note to my startup applications and i don't know why but since that i'm having a 50 seconds delay between the time i see my wallpaper and icons and the time my startup applications start to load. In this delay my CPU is stable and don't work at all.
Xfce is on my girlfriend netbook too and it seems that we have the same configurations when i look in "session and startup".
I am running Ubuntu 10.10 netbook edition as a virtual machine on a Windows 7 Host laptop. I install VirtualBox guest additions. Then I installed Chromium. I want Chromium to autostart whenever the Virtual Machine (Ubuntu) boots up. When I add the entry (system/preferences/startup) I use the command chromium-browser. It stays there until I reboot. After I reboot it disappears from the startup applications and does not startup like it should.
View 1 Replies View Relatedhow to disable startup applications in GNOME 2.30.2 running on Ubuntu 10.04 LTS (64-bit). When I open Startup Applications (System --> Preferences -->) and uncheck a startup program, close Startup Applications and open it again, the program I unchecked is checked again. Even if I remove a program from the list it's there again the next time I open Startup Applications and the program opens when I restart.
View 1 Replies View RelatedOn Ubuntu 10.04, I have been trying to add some Gnome startup applications via the menu system without success. How can I debug/trace this process?
View 6 Replies View RelatedI need to be able to launch a GUI application for all users after they login. I know I can go to Startup Applications and add a launcher, but I don't want to have to login as every user and do that. Is there a file I can edit from the command line with elevated privledges? Something I could script, like appending to an XML file or something?
View 2 Replies View RelatedI am having a HARD, PARTIAL FAILURE OF SOUND on my Linux system (Slackware 13.1, the latest, with a 2.6.33.4-smp kernel and KDE 4.4.3). The failure is "HARD" in the sense that once it occurs it remains broken until I reboot the system. It's a "PARTIAL" failure in that it affects ONLY SOME sound software on my system. Here is a list of what fails and what doesn't. (I'm sure there are other programs I could use to test with, but I don't know what they are since I am "just an average user" when it comes to multimedia software.)
These don't fail:
Amarok
KDE event notification
These do fail:
Firefox
Xine
Mplayer
In the things that fail it is only the sound portion of whatever (flash, mp4, etc) which goes away; the video portion plays normally.n I leave my system up for days at a time. The failure occurs some "long-ish" time (days) after I reboot. I have no idea what triggers it. I do not use sound most of the time, but when I do it's music through Amarok (which doesn't fail) so I do not notice the failure when it occurs.
It seems clear to me that it is NOT the failed programs which are at fault but it is, rather, some underlying set of sound libraries and/or servers used in common by all the programs which fail, and that the failure occurs when something happens which affects that set of sound libraries and/or servers. I don't think this is specifically a Slackware issue since I've seen a few other problem reports on the web where the sound simply stops on non-Slackware Linux systems. Some of the problem reports I've seen suggest that playing sound from one program stops sound from other programs. I've tried various combinations of sound-producing programs but none have triggered the problem.
I've looked at /var/log/{messages,debug,syslog} and see nothing relevant. I've gotten process lists from ps before and after the failure and no "relevant" processes have gone away. (But note, as before, that I am NOT a Linux "multimedia guy" so I can only make intelligent guess at what is "relevant".) Does anyone know what this problem is and, better still, how to solve it? Or where I could look for additional clues? Is there some way to "reset" the sound system without having to reboot?
About a month ago, I had something go very wrong in my Karmic and my account (with an encrypted home dir) was essentially inaccessible. But I was eventually able to create a new account, and retrieve all my data, but now, for some reason, I cannot edit the 'Startup Applications'.
I open its window and make any changes (which the window seems to accept), but then when I hit close, and restart it, it has been reset to everything I had set from my other account. Which makes little sense.
After that problem, I did have some trouble with permissions of certain files, and am afraid that I inadvertently gave up permissions on my startup applications, but can't imagine what I'd have to do to fix it.some guidance?
I use to auto start Firefox and Thunderbird. I would like to add others but using a delay. For instance, Firefox starts with 10 seconds of delay, Thunderbird with 30 second an so on. I tried to make a script using "sleep" command, but I am not expert and nothing worked. So, do you know if already exist an application that does this if not, are you able to show me how to create the script?
View 6 Replies View RelatedSince several months ago (I think when I upgraded to Karmic), whatever program I add to session startup won't load on boot, and no icon appears at the top-right of the screen, only clock and shutdown button (no audio etc.). [URL] didn't help, nor did searching in forums and bugs. I've enabled debug to /etc/gdm/custom.conf, and this is my .xsession-errors first part:
Code:
Unable to create /home/name/.dbus/session-bus
(gnome-settings-daemon:1957): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed
(gnome-settings-daemon:1957): GLib-CRITICAL **: g_propagate_error: assertion `src != NULL' failed
Avviso del window manager: Lettura del file della sessione /home/name/.config/metacity/sessions/10202b25c953eedbf3128344035910216700000019440001.ms non riuscita: Apertura del file "/home/name/.config/metacity/sessions/10202b25c953eedbf3128344035910216700000019440001.ms" non riuscita: Nessun file o directory
Unable to find a synaptics device .....
I removed .recently-used.xbel to avoid recently opened files to be logged, so this explains part of these errors. I had disabled gnome-screensaver but now I would need it to automate screen lock and looks like dbus may be the problem. My .dbus directory is empty.
what exactly is SSH Agent as listed in Startup Applications? And can I safely disable it? I've read around a bit and get the impression is has to do with others connecting to my machine/network which is not an issue for me as I'm the only user, but I'm not clear.
View 4 Replies View RelatedIm not sure why they aren't working - but my startup applications are not running at boot. They run fine from terminal.
I have a startup application for Xchat and the command is just xchat (which works fine from terminal) but it isn't loading at? - I have checked and im not running in safe mode or anything like that - just the standard ubuntu desktop).
Unrelated Question:
Is there a 'global' i.p address I can use to represent all devices on my LAN - so I can mass whitelist in firestarter?
I have a problem in my Ubuntu box. The applications defined in "Startup applications" fail to start. On another user's account, everything works fine. I think that's some configuration problem. Where are the data of of the startup applications stored? (i suppose it's .xx file that I could just delete to restore defaults)
View 8 Replies View RelatedI've got Xubuntu 11.04, VLC 1.1.9. I'm working on some kind of streaming server and I would like to start VLC stream at startup in case of PC reboot (for instance after blackout).
I've made script to do that and append that script to init.d and use upadate-rc.d. VLC don't work correctly because of some network issue (host unreachable, cannot make raw udp socket) but network and all its parts work correctly (for sure!!).
I just installed fedora 15 and I can't seem to find my way around Gnome 3.0.1. In fedora 14 when I connected an external hard drive it used to automount itself. I can't find it in fedora 15 though.
How do I set startup applications in fedora 15? In fedora 14 I used to have this wizard to which I could add an application that I would want to run on startup.
I accidentally removed the low disk space notifier entry from Startup Applications.
To open Startup Applications go to System -> Preferences -> Startup Applications or run gnome-session-properties from terminal.
I'm putting a program in my startup applications that is completely GUI, with no command line options. The program is Calibre, if anybody is curious. Is there any way to start this program minimized? Gnome, Lucid, x64
View 1 Replies View RelatedI've been trying to add applications to my "Startup Applications" menu. Most of the time, they "stick," but sometimes simply disappear, either immediately or after a variable length of time (sometimes more or less immediately, sometimes after several restarts, or anywhere in between). I've noticed that, when they stop booting, their entry disappears from ~/.config/autostart, but changing permissions on the affected files (e.g., removing write access) doesn't seem to help.
Any suggestions? Re-adding the same things over and over gets frustrating after a while, and I can't figure out why these entries are disappearing.Currently running Ubuntu 9.10 on an HP Pavilion dv6000 with an Intel Centrino Core Duo processor and 2 GB of RAM.
Has anyone ran into a problem running Startup Applications from automatic login? I have checked to see that it is not loading in fail-safe mode, and if i disable the automatic login it works fine. The file it is loading is located in my home directory and being executed as
"sh /home/myusername/script.sh"
I noticed that some applications are still in the startup applications list even after i have removed these applications.Would there be any app files left over anywhere / is there a command i can run to clean up the filesystem.Or is it just a case of removing them from the startup app list?
View 3 Replies View RelatedAs the titles says, applications enabled under "Startup Applications" does not show up in the "Notification Area". I can see that the processes are running, like update-notifier and xchat for example, but they have now icon representing them. I don't think I've ever seen an "There are updates available"-icon since I installed 10.10.
Edit: I didn't have any pending updates, so that explains why the update-notification icon's been missing.
Edit 2: Regarding the xchat icon my guess is it's simply loading before the Notification Area applet has, any known way around this?