I followed the instructions for installing Gsynaptics on 10.04 to configure my touchpad and it seems to be working. except, something seems to override my settings whenever I close Gsynaptics or after about 10-20 seconds has passed.
Mainly, all I'm trying to do with it is use it for a simple way for me to turn my touchpad on and off since it's overly sensitive and causing problems. Does anyone know why gsynaptic changes may not be sticking?
When i want to configure my touchpad on my dell inspiron 1525 with debian lenny then i got this message: gsynaptics couldnt initialize you have to set 'shmconfig' 'true' in xorg.conf or xf86config to use gsynaptics My touchpad is an alps and not a synaptics so far i can see. My xorg.conf is this: [URL]
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
I've installed Lucid, and so far the only problem I'm having repeatedly is that my appearance settings aren't saving. Every time I reboot I have to change the visual effects from "none" to "normal", whereupon it searches for drivers and changes the settings. Any ideas what could be causing this and how to fix it?
I've been playing around with my gnome set up and getting it to look nice, but every time I log out, it messes itself up in just a couple of ways. I saved the session, but that doesn't appear to be catching everything. The problems I'm having -I disable trackpad clicking with "sudo trackpad notap", but I need to reenter this every time I log in or it's turned back on again.
No matter what I do to screenlets, I can't seem to get it to remember that I only want ONE picture frame on my desktop when I boot up, and only ONE CPU monitor. It instead boots up 2 and 3 respectively.I have set stickynote to open up automatically, but it never boots up to the screen, only the panel above. I then have to double click on it to get it to open.Is there a way to save not just the session but every setting you've got running currently on a Ubuntu machine, and then load them automatically when you boot?
so I just got 10.04 installed. My settings anyway for compiz and appearance are not staying "saved" after I shut down then log back in. For now, I just say save sesssion under the startup menu. how to make this work?
I'm using Ubuntu 10.04 64-bit and I'm having the following issue: a lot of the programs I use seem not to be able to save their settings on shutdown (Visual Paradigm for UML, for example. Kile is another one). This happens only for some of my programs. What is causing this? Have I installed them in an inappropriate location? (e.g. VP is in /opt). I also have this problem sometimes with system settings (screensaver reverted to old value upon reboot once, but after that it worked...).
Edit: Just noticed running as root doesn't work either, I rebooted and it's back to square one
Ok, let me explained what I did. I was curious and decided to try out Gnome 3. Big mistake. I did a purge to get rid of it and now Unity comes back up. So far so good. Now none of my settings save... my "keep in launcher" apps do not stay there, my settings (accounts work fine) in Empathy don't stay and the weather settings reset. How do I get things to save when logging out or rebooting?
Over the last two months I've been trying out Ubuntu 10.04 32bit using Wubi under my current Windows 7 32bit OS, and I'm at the point where I want to reformat and partition my HDD making Ubuntu my main OS (with a very small partition for Windows 7 on the side for certain things).I was just wondering if it is somehow possible to export all my current settings and preferences for my current installation of Ubuntu so that once I've reinstalled it, I can import them and everything will be the same as it is now (I hope that made sense...).I'm not too fussed about reinstalling apps and things, just all my current settings and preferences.Oh and also, (this might not be the place to ask, but I know you'll probably be able to answer this as well) is there anything I can use to do the same export/import process with my Windows 7
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up.
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
Initially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
I am running F11 and would like to use ccsm to modify compiz settings. However; when I modify any settings in ccsm they do not seem to take effect at all. I have tried rebooting etc. I have checked the file /home/*username*/.config/compiz/compizconfig and all that's in there is:
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
When I reinstall my distro (MEPIS, for the last 2.5 years), making my new user account preserve all the old account's settings has always been a difficult and very messy process, especially if I have installed a new copy on another partition. (I'm doing that soon, so I have this copy as a backup until I have everything the way I want it on the new copy.) Most of my stuff gets saved, but not everything. The biggest problem is that, even if I select "preserve data in /home" in the MEPIS installer, my keyboard shortcuts become unusable (not completely erased) under odd circumstances. They're still listed in file /home/josh/kde/share/config/khotkeysrc, but they still can't be used, and I have to open hhotkeysrc and manually delete them and then reenter them in the menu editor (the K menu, by the way, gets completely overwritten).
I can't just overwrite the entire new user account with the old one; I've tried, and something goes wrong so that the new account can't be opened (probably because some important files are inaccessible--I can't tell which ones they become inaccessible).Anyway, is there a program that can preserve all the user account settings neatly for a new installation of the distro? I am supposing there is a program or at least a method, because I never hear others complaining about this problem. I probably don't know something I should know.
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
using gsynaptics to increase the touchpad sensitivity on my macbook 4,1. However,installing gsynaptics makes my fans increase to 6000rpm every 10 minutes. I uninstalled gsynaptics, and it no longer does that.But, I want greater sensitivity! =( its a catch 22.Is there a manual way to increase sensitivity without installing gsynaptics? or another alternative tool?
I don't understand what more i can do, the bellow is what i have done. is there a conspiracy against me??? (ive been through 3 distros and spent the better part of 2 months , i mean literally, all day every day, trying to get one distro to actually function at reasonabe capacity and each one is full of its own problems ) now:
This is the input device section of my old xorg.conf:
Having openSUSE 11.2, Firefox (latest release) is having some issues when comes to "saving image as", it fails to offer "saving window"? Konqueror works normal, what could be the problem with Firefox?
i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed. 2) change file permission settings to force all documents to inherit parent document settings
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
I have a triboot windows suse 11.3 stable and suse 11.3 factory pc, I would like to share the browsers and email settings between the suse stable and factory, I succeed with thunderbird and firefox moving the /home/.thunderbird and /home/.mozilla in an ext3 shared partition and linking these in the respecive /homes, I found that there isn't a /home/.chromium folder, I found probably /usr/lib64/chromium could be the same as /home/.mozilla for firefox, but I don't know if is secure or can damage my system to move this in a ext3 partition and then link this to the respective /usr/lib64/chromium, /usr/lib64/chromium has root owner, root group, visible and modifiable for root and only visible for group and other.
I am running a debian squeeze machine on a ibm t40 laptop with window maker as my window manager. I am using gpointing-device-settings as a program to get the scroll bar on my touch pad working. unfortunately, I can't get the settings to stick after i shutdown and turn on. I have to go into the program and unclick then reclick the button. i'm using version 1.3.2 (ive tried both deb and source versions). does anyone have any ideas on how to fix this? and if there is any configure files that I could configure instead of having to use the gui program.
I'm trying to create a user account for my children in Ubuntu 10.04
When creating their account, I have turned off the 'Connect to ethernet and wireless' option of the Advanced Settings.
However, when I log into their accounts, they still have full access to the internet through both the wireless and ethernet connections. Is this option for some other purpose?
Is there an alternate way to limit internet access for childrens' accounts in Ubuntu? (I'm used to MS Family Safety as a filter for internet access - is there an eqivalent for Ubuntu?)
