Ubuntu :: Programs Not Saving Settings Unless Run As Root?
Aug 26, 2010
I'm using Ubuntu 10.04 64-bit and I'm having the following issue: a lot of the programs I use seem not to be able to save their settings on shutdown (Visual Paradigm for UML, for example. Kile is another one). This happens only for some of my programs. What is causing this? Have I installed them in an inappropriate location? (e.g. VP is in /opt). I also have this problem sometimes with system settings (screensaver reverted to old value upon reboot once, but after that it worked...).
Edit: Just noticed running as root doesn't work either, I rebooted and it's back to square one
View 1 Replies
ADVERTISEMENT
Apr 1, 2011
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies
View Related
Apr 29, 2010
I've installed Lucid, and so far the only problem I'm having repeatedly is that my appearance settings aren't saving. Every time I reboot I have to change the visual effects from "none" to "normal", whereupon it searches for drivers and changes the settings. Any ideas what could be causing this and how to fix it?
View 9 Replies
View Related
May 4, 2010
I followed the instructions for installing Gsynaptics on 10.04 to configure my touchpad and it seems to be working. except, something seems to override my settings whenever I close Gsynaptics or after about 10-20 seconds has passed.
Mainly, all I'm trying to do with it is use it for a simple way for me to turn my touchpad on and off since it's overly sensitive and causing problems. Does anyone know why gsynaptic changes may not be sticking?
View 3 Replies
View Related
Jun 17, 2010
I've been playing around with my gnome set up and getting it to look nice, but every time I log out, it messes itself up in just a couple of ways. I saved the session, but that doesn't appear to be catching everything. The problems I'm having -I disable trackpad clicking with "sudo trackpad notap", but I need to reenter this every time I log in or it's turned back on again.
No matter what I do to screenlets, I can't seem to get it to remember that I only want ONE picture frame on my desktop when I boot up, and only ONE CPU monitor. It instead boots up 2 and 3 respectively.I have set stickynote to open up automatically, but it never boots up to the screen, only the panel above. I then have to double click on it to get it to open.Is there a way to save not just the session but every setting you've got running currently on a Ubuntu machine, and then load them automatically when you boot?
View 2 Replies
View Related
Jun 23, 2011
I have two monitors. One on my laptop, and one hooked into the VGA port on the laptop. I want to use these as an extended desktop.
I can set everything up correctly, but after I reboot, or shutdown, all of those settings have to be manually put in again. This is consistent.
how to get these settings to be permanent?
View 1 Replies
View Related
Apr 11, 2010
I wanted to save a python program because I am reading byte of python and I went to save in !/usr/bin. When I try to save in this folder I get this error "[Errno 13] Permission denied: 'usr/bin/helloworld.py'.
View 9 Replies
View Related
May 2, 2010
so I just got 10.04 installed. My settings anyway for compiz and appearance are not staying "saved" after I shut down then log back in. For now, I just say save sesssion under the startup menu. how to make this work?
View 6 Replies
View Related
May 24, 2010
I recently installed Ubuntu, 10.4
My problem is that when i log in, the resolution isnt what i want. So i change it via the Nvidia x server settings, and press Save to x config file
Yet when i log in again, it defaults back to what it was before i changed it?
Iv looked all over the internet for the past 2 days and nothing seems to work.
View 6 Replies
View Related
Jun 28, 2011
Ok, let me explained what I did. I was curious and decided to try out Gnome 3. Big mistake. I did a purge to get rid of it and now Unity comes back up. So far so good. Now none of my settings save... my "keep in launcher" apps do not stay there, my settings (accounts work fine) in Empathy don't stay and the weather settings reset. How do I get things to save when logging out or rebooting?
View 4 Replies
View Related
May 24, 2010
Over the last two months I've been trying out Ubuntu 10.04 32bit using Wubi under my current Windows 7 32bit OS, and I'm at the point where I want to reformat and partition my HDD making Ubuntu my main OS (with a very small partition for Windows 7 on the side for certain things).I was just wondering if it is somehow possible to export all my current settings and preferences for my current installation of Ubuntu so that once I've reinstalled it, I can import them and everything will be the same as it is now (I hope that made sense...).I'm not too fussed about reinstalling apps and things, just all my current settings and preferences.Oh and also, (this might not be the place to ask, but I know you'll probably be able to answer this as well) is there anything I can use to do the same export/import process with my Windows 7
View 3 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up.
View 1 Replies
View Related
Dec 25, 2010
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies
View Related
Apr 8, 2011
When i installed Ubuntu, everything worked fine, sound drivers installed automatically and volume was perfect.Then one day as I was talking to a friend on skype, I tried changing the output to speakers from my headset during the call and i didnt get any output. I tried changing a few settings, can't remember which ones exactly until I noticed someone had pulled the audio cable from the back of my PC. I replaced it but I started getting very very low sound.I found out about alsamixer and when I ran it, I found that the volume on that device was turned down, i turned it up and voila! sound back to normal.However, now when I reboot, my sound goes down again. I have tried deleting the asound.state file and running the save command, "sudo alsactl store 0" I think, as someone suggested, but no cigar.
View 3 Replies
View Related
Sep 9, 2010
Initially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
View 14 Replies
View Related
Sep 3, 2009
I am running F11 and would like to use ccsm to modify compiz settings. However; when I modify any settings in ccsm they do not seem to take effect at all. I have tried rebooting etc. I have checked the file /home/*username*/.config/compiz/compizconfig and all that's in there is:
[gnome_session]
backend = ini
profile =
View 3 Replies
View Related
Jan 26, 2011
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
View 1 Replies
View Related
Jul 30, 2010
When I reinstall my distro (MEPIS, for the last 2.5 years), making my new user account preserve all the old account's settings has always been a difficult and very messy process, especially if I have installed a new copy on another partition. (I'm doing that soon, so I have this copy as a backup until I have everything the way I want it on the new copy.) Most of my stuff gets saved, but not everything. The biggest problem is that, even if I select "preserve data in /home" in the MEPIS installer, my keyboard shortcuts become unusable (not completely erased) under odd circumstances. They're still listed in file /home/josh/kde/share/config/khotkeysrc, but they still can't be used, and I have to open hhotkeysrc and manually delete them and then reenter them in the menu editor (the K menu, by the way, gets completely overwritten).
I can't just overwrite the entire new user account with the old one; I've tried, and something goes wrong so that the new account can't be opened (probably because some important files are inaccessible--I can't tell which ones they become inaccessible).Anyway, is there a program that can preserve all the user account settings neatly for a new installation of the distro? I am supposing there is a program or at least a method, because I never hear others complaining about this problem. I probably don't know something I should know.
View 4 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up
View 3 Replies
View Related
Nov 29, 2010
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
View 1 Replies
View Related
Jul 16, 2011
If I want to upgrade to the next version, how to do it keeping my present set up of programs & settings intact (including Compiz), so that I need not install Individually all over again?
View 5 Replies
View Related
Aug 17, 2010
I know it is possible to boot Ubuntu Live from a Flash drive. But it just boots up and runs like its a CD. When you shut down the computer, the changes are all lost.
Is there any way to use the flash drive as a Hard Drive? like install Ubuntu on the flash drive and have the flash drive act as a hard drive - so that if I boot with the flash drive in the computer I can boot of of the flash drive and it would act as a hard drive?
Could I just setup Ubuntu and select the flash drive as the install directory? would that accomplish this?
View 5 Replies
View Related
Aug 10, 2010
I am using wubi since last 2 months. Now i am planning to install ubuntu lynx on my partition. Question is, can i install it and overwrite wubi's / folder to my hard drive to get all my programs and settings?
View 4 Replies
View Related
Jan 2, 2011
How to format hard drive (with ubuntu 10.10 maverick, 32-bit vs.) and, after it will have been formatted, bring all system settings and programs which I run know back e.g. Compiz, browsers and other (of course without installing each one of it separately)? Is it possible to copy some parts of the HD and copy it after format?I can add, that I'm using now three partitions: dev/sda1/ (with Win7 OS � 64-bit, NTFS); dev/sda3 (with ubuntu 10.10 32-bit vs.; ext3) and dev/sda4 (linux swap); dev/sda4 (NTFS for storing files).
View 2 Replies
View Related
Sep 3, 2010
I fired up my PC this morning and not unusually got an update message. I updated all that I was instructed to, as per normal - and at the end of the update was told that I'd need to restart to effect changes. I was in the middle of something else at the time so I left it but I turned the PC off an hour or so later and left it.
On starting up again I cannot get my previous resolution (1600 x 1200) and Second Life resolutely refuses to run giving a "Window creation error". Trying to change the display settings from the System> Administration menu just stops: It asks for the root PW and then nothing happens
Clearly something's gone a bit pear shaped here. I'm using Fedora 12 wth a PAE kernel and on an AMD 5200 chip with an nvidia 7900GS card. Things worked fine until this update so I strongly suspect that to be the cause but what can I do to fix it? Is there any way to "roll back" the update somehow or is there a fix?
View 9 Replies
View Related
Mar 1, 2011
In the applications menu I would like to always run certain programs as root. For instance Wireshark; I'll never want to run that as a regular user I'll always want to be root. Is there a way to set it up so that when I click it in the menu I'm prompted for my password and it will automatically run as root? (Much like in windows you can right click and check the box that says always run as administrator.)
View 2 Replies
View Related
Jan 8, 2011
and if i didnt customize partitions when i installsed and just used the whole drive - they're both together in the same partition right, the home just goes into the root? but it still creates a 2-3 gig swapfile?
do you recommend creating separate partitions for the home and root folder during install? is there any benefit besides being able to reinstall ubuntu without losing your data?
View 1 Replies
View Related
Feb 22, 2011
At least this is what it looks like to me.
Amarok can play music but asks to open kde wallet manager for some password. All other programs (vlc, media player, audacity, etc) seem to function normally but no sound comes out of the speakers. code...
So simply running program requiring sound enabling as root does not work - plus it would not be very good practice, IMHO.
What should I do?
View 2 Replies
View Related
Apr 3, 2010
I have access to an account on my school's student-linux server, but I don't have sudo or root access.
I would like to install and use programs aside from the minimum ones available to all users. We have been given permission to do this, excepting new webserver and database software.
I know enough to compile and make a tarball, but that leaves me with an inelegant directory structure, no man page access, and no easy access to the executable.
I would like someone to share how they would install programs in this environment- ideally in a clean manner, with access to the man pages, and info about how to set an environment variable so the programs can be accessed via their name (without a path) both by me and possibly by scripts.
Dealing with missing libraries seems to complicate things further. For example, a program as simple as toilet requires libcaca.
I think the proper handling of the process of cleanly installing libraries in a user's home directory is an integral part of an answer to how to install programs without root access.
View 2 Replies
View Related
Sep 1, 2011
I have ubuntu 11.04 installed along side windows. And I often share files with windows computers. If I am installing a new package from ubuntu software center, and consquently I have to log in as root to do so, which means I have given the system 'privileges' as the program is being installed, I decide to go open mozilla, and surf suspicious sites on the net. Is it possible in that case for me to get a virus?
When we enter the password for the root user in order to run one program such as ubuntu software center, does that mean that all programs have root privileges for the time being (as the software center is installing the program)?
View 3 Replies
View Related
