Debian Multimedia :: Hibernate / Logout Garbles Screen And Freezes
Jul 13, 2011
I have a problem with garbled graphics after resuming from hibernate or logging out (when the screen blinks and goes back to the display manager). It only occurs when I do either, about half the time. What happens is the edges of everything "bleed" horizontally (left to right) in red and green colors and black text on a white background becomes entirely unreadable (but white text on a black background is readable and just looks a little bolder). If I shut down or restart the computer (softly) when the screen has garbled, then it will freeze and not even the SysRq keys work (I have enabled it in /etc/sysctl.conf). Then the only thing left is to do a hard restart (in which case there's a voice saying "System failed VGA test" before BIOS/GRUB loads) or poweroff. Powering it off and then starting it again works fine. I did a google image search and this is sort of how it looks when it freezes: link
Once the screen has garbled (but only if it hasn't frozen) I can use SysRq to issue S E S I S U O to shut it off and then power it on, and that works: then I get a non-garbled command line after sigterm and it shuts off and starts up properly. If I issue B instead of O (to restart) I get the "System failed VGA test" on boot (but it doesn't freeze when shutting down). Hibernation is easy enough to fix by just turning it off (it's not a laptop so I don't need it anyway), but it still happens sometimes when I log out. So as long as I never change users the system works perfectly and this never happens. I've tried GNOME, Xfce4, OpenBox without any DE, gdm3 and SLiM and the problem persists in all of them.
Some system details:
Debian Squeeze i386 (using only software from the stable main repository)
Kernel: 2.6.32-5-686
Video card: ATI Radeon 9600SE (using the preinstalled open source drivers)
Motherboard: ASUS P4P 800-E
By the way: sometimes when it's in the process of shutting off (when the display hasn't been corrupted), after it kills all graphical applications, I can see that the CLI text gets the garbled look, but at that point the poweroff works without freezing. This is the most similar sounding bug that I could find: [URL]. Unfortunately I can't find a solution to it, and most people who have similar problems seem to get either the garbled graphics or the freezes, but not both. Also: how safe is it to keep shutting off with SysRq to recover from this? Can I get disk errors?
I have Lucid setup for multi user. Whenever 2 users are logged in and one logs off, it freezes on a black screen. It looks like it logs off OK and is on its way to the main login screen but never gets there. I found some older posts describing this problem but no solution. I tried to post to that thread but got a message saying I was not permitted. I am new to Linux and am struggling to figure out how to problem solve issues in Ubuntu.
libreOffice garbles my screen and have to emergency get aout Ctrl-Alt-Backspace.
here is what i have in /var/log/messages: Mar 16 18:58:28 aruba polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.471, object path
By freeze, I mean that the mouse can still move, but everything else behind it is frozen entirelyI can switch to a terminal with CTRL+ALT+F1, it's ... I guess... X or gnome-shell or something that's frozen? Not the whole OS thoughThese freezes last anywhere between 5 or 10 seconds and 3-5 minutesI can't predict when they will occur, but often, after a suspend/resume, they will start occuring much more frequently. Also, they often happen after I enter my password and press ENTER on the lock screen after a resume from suspend. But not exclusively -- they can happen at any other time when I'm doing pretty much anything in GNOME...
Things I've Tried...
When frozen, I've tried to CTRL+ALT+F1, login, and run gnome-shell --replace... [*[When frozen, I can successfully CTRL+ALT+F1 and run `service gdm restart`... with the obvious downside of losing everything I have open. But the screen responds immediately and I can log back in to GNOMEI tried running `Xorg -configure` to generate an /etc/X11/xorg.conf file to edit, but received an error about not being able to generate configuration for multiple screens or something (I can retry and provide the exact error if this is a useful direction to try) is it the gnome-shell freezing? Is it X? Is it a problem with the X driver I'm using?
when Gnome starts my Desktop completely freezes. So I decided to reinstall and install Gnome2. When Debian is freshly installed I still need to configure and install my ATI 6950 Graphic card and the X config. Since the latest drivers from ATI I can use the --initial config from ATI. This all seems to work. But also when I use Gnome2 my screen completely freezes. I don't see any special things in my logs. I do remember that with my previous PC I had the same problem. This was the "first" reason why I left Debian for my desktop.
I installed the pulseaudio equalizer today on my Karmic desktop using the instructions at URL...When I enable the equalizer via the GUI checkbox, my sound instantly becomes garbled. When I disable it the problem disappears, but then I can't use the equalizer, which was the point of the exercise. I found some suggestions about editing /etc/pulse/default.pa, but the parameters concerning module-hal-* don't appear in my default.pa. I also have read through a couple of Audio Troubleshooting guides without finding this particular symptom.
For some reason the shutdown/hibernate/logout options has disappeared from the Indicator session. I can still set my status in EmpathyI have tried reverting to gnome panel defaults (gconftool --recursive-unset /apps/panel && killall gnome-panel), removing and readding and I've checked synaptics and it seems I have everything indicator-related installed.
As a normal user I have activated the functions of the Quit applet, i.e. Logout, Shutdown and Restart are active buttons. I am able to restart or shutdown, no problems. But when I use the Logout button I don't get logged out, just returned to the login shell & I am still logged in as my user. I don't have a display manager installed and I do NOT want to use a display manager such as XDM or GDM. How do I get the Logout button to actually logout the user? It appears I am only getting logged out of the x-session, but I want complete logout.
I recently upgraded to Ubuntu 11.04. I didn't really find the Unity interface useable (I didn't like Ubuntu Netbook Edition for this exact reason) and am running it in Classic mode. I have a Acer Aspire One D255, Intel Atom processor, etc. When I start the computer up from a hibernate, the screen goes black with a set of random colored pixels at the top corner. I have a mouse but nothing else.
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and invoke-rc.d gmd3 stop invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
I am using debian 6 on an acer 5338, intel 3d integrated graphics (don't know the exact type)
When I hibernate and restore the display/fonts can be corrupted. It can be fixed by logging out and back in. Switching virtual terminals (ctrl-alt-f?) has no effect. Is there a better fix?
I just installed debian unstable with kde 4.4.5 on a new hp desktop. Just about everything is working fine except when I try to logout or shutdown by right clicking on the desktop. No matter which option I choose--logout, shutdown, or restart--the screen goes black and nothing happens. I'm forced to do a hard shutdown or use alt-SysRq-B to reboot. I can reboot or shutdown using the command line when logged into kde.
I seem to have no end of strange problems. Ctl-Alt-Del no longer presents me with the logout/shutdown dialog. I have no idea what caused it to disappear. I have to use Ctl-Alt-Backspace to kill X now in order to shutdown, reboot, or log in as a different user. I can't find any setting in kdmrc that might affect this. I'm running straight squeeze. I have been removing and re-installing a variety of packages, (see my post on Kaffeine, e.g.) but have not seen any errors or found any broken packages.
When I click logout under the user menu (top right), the confirmation dialogue appears, and I can click Logout. the dialogue disappears and it starts to logout normally... then it just stops. it freezes once the top toolbar disappears. my tint2 bar stays visable, as well as my desktop background, and i can move my cursor around, but it wont respond to my keyboard. After just letting it stay like that for a few minutes, nothing changes, it doesn't even dim the screen or go to sleep, it just sits there.
I can shutdown and switch users just fine, just not logout.
I've read some past issues with this and was wondering if anyone else has issues with F12 / F13.
When I logout of gnome or kde on a fresh install of Fedora 13 the panels disapear but I never receive the log on window. I cannot switch to command either the screen is locked completely.
I havn't run updates or anything, the install is nearly out of box except for the installation of kde.. The issue existed before I installed kde, I was hoping it didn't have this issue lol. fat chance of that..
Lenovo X200 notebook, 64bit maverick, external monitor connected through DisplayPort, fast SSD drive, encrypted homeI'm almost positive these issues were non existent after installing 10.10RC, but I'm not 100% sure. Maybe I will install it again to check it outAnyway, when I try to suspend/restart/shutdown/logout the system often freezes, showing the console with the similar output:I know this guy is running Ubuntu in VM, but I have very similar ouput, except the last usplash line.But the first line I always have in the output is the infamousQuote:GLIb-WARNING **: getpwid_r(): failed due to unknown user id (0)On a very rare occassion, the system hanged while booting (showing the above glib line as well. But that's quite rare, so I'm not that concerned.
Now, sometimes it does respond to ctrl+alt+delete after freezing, and after I hit this combination, another line appears (from memory):Quote:Init: rc main process killed by TERM signalChecking for running unattended-upgradesBut that's it, I cannot do anything else, only hard reset, which is especially painful when I suspend in the middle of work...There is no interesting information in the logs - a few messages in the kern.log, but nothing I think would show the culpritEDIT: other than that, the machine is very stable and I have no issues with it. It also worked perfectly on lucid 32bit.
I use Fluxbox as the window manager in X Window. I installed hibernate packages and gnome power management. I set the idle time at 30 minutes using the gnome power management program. It doesn't suspend at all. The monitor only shuts off during idle.
So, I logged in as root, started X. Without .xinitrc gnome desktop manager launched. As I clicked shutdown, it showed a dialog box asking hibernate / suspend / restart / etc. And then, I chose the [hibernate], the system shut down and came back to previous status when system restarted.
Which gnome program does control hibernate / suspend?
Is there anyway that I can control hibernate / suspend in command? I just need to make a little script and assign it to a launch key so that I can suspend the system when it's on idle.
after i installed latest ATI proprietary drivers ( 9.3 legacy drivers) for my HP compaq nc6000 with a "Mobility Radeon 9600" the standby and the suspension stopped working, i mean, if i try to suspend or hibernate my laptop, it closes X (this is fine) but after it gets freezed on the whole screen black with just a blinking underscore and nothing more, neither an error message after reboot.All i can do is to force shutdown by pressing poweron button for 5 secs.I'm running on a lenny, stable with stable repo.What can i do to understand where does this problem comes from and maybe fix it?
I installed Ubuntu 10.10 on my laptop Lenovo T410 and I found a strange behaviour: sometime a part of the screen (small rectangle) freezes and there is no way to unfreeze it. The only way is to shutdown. I cannot use it to work Other colleagues of mine that installed the same Ubuntu version on the same laptop do not have any problem.
Acer desktop m3641 mcp73 (the motherboard?) Intel pentium dual cpu e2200 ram 2gb hdd 300gb The only os is debian and there is plenty of space on the hdd.
Symptoms: When I click on something, say Evolution or Empathy or Maps, about 1 in 5 times the screen will freeze and I have to switch the computer off and on again.
I had this problem with Wheezy and could not resolve it. In the past week I have installed Jessie 32bit and then Jessie 64bit and I get the same problem.
On downloading my copies of Jessie I have verified the md5 and sha.
I installed debian server on a custom built intel computer, with a 2.5 ghz dual core processor, 3 Gb of ram and a 500 GB sata hdd, I had originally installed debian server to use it as a web server, but for some reason after a few hours it completely freezes, mouse wont move I cannot connect to the webserver or ftp server, I restarted it and it will do it again, it isnt a specific amount of time it just does it randomly sometimes it will take 2 hours another time it will take 2 days, anyone know what could be wrong, I am quite new to linux and am not sure exactly how to view logs and such.
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
This started happening after I started working on the kernel image and initramfs tools configurations basically started trying to make my system work the way I wanted.I can be doing anything like playing worms or being on this forum and the screen turns black but I don't lose energy just nothing shows on the screen and my keyboard doesn't respond the num lock doesn't turn either state,
So it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.
The OS is # uname -a Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux (aka Squeeze?)
Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.
One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.
I am using ubuntu 10.10 on Dell Inspiron 1525 dual boot with vista. My concern is streaming online videos through websites such as BBC iplayer, sky news, ....., NDTV news channel, etc. Videos are streaming perfectly fine as long as they are not running on full screen but if I try to run them on full screen video freezes (after a few minutes, say 5). Interestingly, sound does not stop. I can still hear the latest news updates but the video does not correspond. Same videos are running fine whether full screen or not in vista.
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
From time to time system freezes with no particular motive but most often when watching you tube video in full screen mode. How to diagnose freeze, hang, blocking problems in debian jessie system amd 64 gnome 3?
