I am using debian squeeze. I haven't changed much and I am a newb at this sorry. I can use the SFTP, but I can't use the FTP under any account. I can't find a conf file or anything for this.
View 8 RepliesI am unable to connect to a WEP-protected network. the Network manager log shows either a DHCP timeout, or a failure to associate. (attached below).Changing to WPA is not an option, as the network is not controlled by me. This is with the rt61pci driver for a Ralink 2500 series chipset.(Rosewill RNX-G300EX card)Manually forcing an IP does not result in a connection either. This is with the latest OpenSuSE 11.4, all patches applied. Router is a D-Link DIR-613, and I know the passphrase I'm using is correct because it connects both on my Android (what else?) phone, and my lappy when I boot XP.
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection state: associating -> associated
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection
[code]....
Though I had solved this but I was premature. Here are the details. When I use HDMI to connect to my lcd TV it works fine in Windows7. (I have dual partitions W7/Ubuntu),but when I boot into Ubuntu and use HDMI, nothing happens.
lori@lori-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
also when I open the Gnome Alsa Mixer, under the HDMI tab, there is just a blank screen. I believe I have the latest Alsa releases.
I installed Ubuntu (10.04) today and it has gone smoothly except for the fact that I can't connect to the Internet when in Ubuntu (connection works fine in Windows XP). I am using a wireless USB card (Linksys WUSB600N) to connect.
The weird thing is that the card detects all the local networks, asks me for a password to my network, and it even says it is connected to my network after I put the password in -- but when I open Firefox no pages will load.
There is another weird quirk as well: Ubuntu will not restart or shut down properly (it hangs around indefinitely with the little white / orange dots going across the screen) unless I first remove the wireless card from the USB slot. But that doesn't bother me as badly as the lack of Internet.
I am running my wifi using YAST and IFUP. The card is a zd1211, and works just fine. However lately I have have to "start" it manually after booting. The only way I have found to do this is to open YAST >network settings> and "edit" the card, but NOT change anything, just click through the next buttons and it connects. I have tried using the settings "on boot" and "on hotpug" but always when I reboot, I have to go through the YAST rigmarole. This is a PITA. I am trying to avoid NM as I want to sort this out, not cover it up with more software.
View 4 Replies View RelatedI have finished reconfiguring my 1st PC Centos 5.5 with Squid and Dansguarian. Works fine the configuration is basic.lets name it to 1st PCeth0 - modem ip (public)eth1 - 172.16.1.1 (LAN)Then I've decided to change and add another Centos 5.5 for Firewall Service that is directly connected to the modem and then shares internet connection and some ports to 1st PC.
lets name it to 2nd PC, it also has two NICSeth0 - modem ip (public)eth1 - 10.0.0.1 (ip to connect to the 1st pc with squid services)so I changed the ip of the 1st PC with theseeth0 - 10.0.0.2eth1 - 172.16.1.1 (LAN)and connects the eth0 (10.0.0.2) of the 1st PC to the eth2 (10.0.0.1) of the 2nd PCthen I've tried browsing on the network but it does not work...is there a simple iptables command for the 1st PC and 2nd PC?ere are the iptables script and lists of my 1st and 2nd PC 2nd PC (firewall to be)
#vi /home/user1/fw.sh
#!/bin/sh
123=/sbin/iptables
[code]....
I have no idea why, but my website times out as soon as you try to use the cart.(which invokes SSL)It seems to have happened after I went live from testing, but I checked my configurations, and I can't see anything awry in my apache2 confs.Has anyone run into this before?I don't know how or why this happened or how to even begin fxing it
View 9 Replies View RelatedI have done a minimal install of jessie stable on a 2004 laptop with openbox as the window manager. My problem is the nautilus connect-to-server returns "This file server type is not recognized" when entering sftp: or ssh: I have also tried installing Thunar with the same result. I can use cli and connect using both sftp and ssh.
View 3 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View RelatedI see a bunch of threads that deal with ssh working but sftp not. I just the opposite of that. When I use sftp I'm immediately prompted for the key's passprhase and all works well. When I use ssh I am told
Permission denied (publickey).
I've looked at the file and I have read and write permission. I can use sftp, so it's not a problem on the other end. I can access the same server with the same computer using a different user account and a different key. I can access the same server using the same key from a different computer.
I'm using Ubuntu 10.10 with OpenSSH 5.3
Basically i set up a webserver using this tutorial but installed ubuntu 10.10 [URL]
im using charter cable and it has that ubee router. when i tried to set up the static ip the closest thing i saw was an option called static ip lease in which input my servers local address and mac address and checked enable. then i applied dmz to my servers local ip. after that i typed in my public ip and to my excitement it worked. so i began creating the website. i dont know if all that is relevant but just in case i didnt want to leave anything out. this is my first time with linux and servers and ive only been at it for about 5 days. anyways i made the website and everything was going good then i needed to reboot the server so i did. after reboot i logged into the server then went back to the other room where i worked on the server using putty from a pc and flashfxp and tried to navigate to the website in firefox. it didnt work. if i try to go to the website address from a computer on my network i get a problem loading page error from firefox and if im on a different network it shows my router page to login and configure. i dont understand how it was working then after reboot it all of a sudden doesnt.
o also i installed gnump3 today before reboot if that is important
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
Delivery via docevot lda works for the virtual users.
Sending a mail that should be redirected to a folder instead of going to the INBOX does not work
Code: Select allecho "lala" | mail -s beispiel julius@myvirtualdomain
#/home/vmail/julius@myvirtualdomain/.dovecot.sieve
Code: Select all
require "fileinto";
if header :contains "subject" ["beispiel"] {
fileinto "beispielordner";
} else {
# The rest goes into INBOX
# default is "implicit keep", we do it explicitly here
keep;
}
I can see no errors in dovecot.log, -info.log, -debug.log but also no sieve messages
Code:
Select all
#/etc/dovecot/conf.d/15-lda.conf
protocol lda {
postmaster_address = julius@localhost
mail_plugins = $mail_plugins sieve
[Code] .....
I bought a laptop : Samsung R580 and when i want to install Debian Squeeze with NetInstall, it's impossible because ma Ethernet Card isn't recognized.These are the caracteristics of my card :PCI ID : 11ab4381Supporté : YesFabricant : Marvell Technology Group Ltd.Matériel : 88E8059 PCI-E Gigabit Ethernet ControllerPilote : sky2The driver is not in the kernel 2.6.32 and i must to wait a new kernel version in Debian?
View 8 Replies View RelatedAfter to install Debian Sid, i can't to connect to my network. When i launch lsmod, ath9k is present so the module is enabled.I don't use network-manager-gnome, wicd and other, i modify myself /etc/network/interface. But even with this configuration, the wifi does not works.
View 3 Replies View RelatedNew build to F12. Sound was fine in F11. Now, massive distortion. I have tried every possible permutation of settings. With the main volume control in the top taskbar, there are two positions of level setting where the audio drops to a normal level and sounds OK but any application changing the level or starting to use the Pulseaudio changes the level and its loud and massively distorted again.
In the Pulseaudio manager->sink->alsaoutput.pci-0000-00-11.5.analog-stereo -> properties-> show volume meter, the audio is always maxed out in level. I have tried everything, its unworkable right now. Its possible to start alsamixer from terminal and adjust settings for good audio but any future change reverts to distortion. All changes in Pulseaudio Dev mgr or vol control etc change the audio as they should but do not affect the problem.
I just installed 11.2 kde desktop everything works fine except no sound when I play ..... and watch movie online worked with my audio and video files in my computer only
View 1 Replies View RelatedThis has been bugging me for quite a long time. I need to have a pptp connection to my university. I have tried to locate the error, but this has been a real trouble.
A little bit of history: My girlfriend had a laptop with M$ vista on it with a working PPTP connection. I had a laptop with Ubuntu, with which I couldn't get the PPTP working.
When my laptop crashed, I bought a new one on which I run a dual boot XP SP3 and Ubuntu. I also own a desktop (Dual M$ Win 7 / Ubuntu standard Karmic) and my girfriend also upgraded to Win 7.
Currently, the XP version is the only one on which I can get a connection. Both Ubuntu and the Win 7's give me a GRE proc 47 not received error. I know our router (a DAVOLINK DV2020) is notorious for not sending through GRE proc 47, but this either shouldn't be the case or it shouldn't matter, since I can make a perfect connection through the XP OS.
This is quite a handicap, since we both study at the university for which we require working VPN PPTP connections.
Settings:
Gateway: vpn-eur-pptp.eur.nl
Username: 123456ab@eur.nl
Password: password
Authentication: MSCHAP / MSCHAPv2
[Code].....
I have just installed a testing net install of squeeze on my laptop and I'm having a few problems with my wired connection.
When i try to ping google.co.uk there is a large delay between each result even through the actual ping takes ~30ms. It takes about 5 seconds or more between each ping.
If i use ping -n it works fine. Does anyone know why this is happening?
I ping my router. If I keep my mouse moving (or i'm typing) I get a 5ms ping.If I stop typing/moving my mouse, it times out.
- I disabled NetworkManager for the inteface eth0 but it doesn't solve the problem.
- I'm having the same problem using a Ubuntu 15.01 bootable image
- I'm having the same problem usign an Ethernet PCI Adapter
- I'm having the same problem usign a Wifi PCI Adapter
lsb_release -da
Code: Select allDistributor ID: Debian
Description: Debian GNU/Linux testing (stretch)
Release: testing
Codename: stretch
[code]....
At first I thought the card was broken, but it connects to networks fine. I know its kind of minor, but is there a way to enable the little traffic indicator lights on the card?
View 1 Replies View RelatedI just put a pfSense firewall inbetween my ADSL router and my LAN. It's configured to have a cachng DNS server and a DHCP server. Among other things. For reasons beyond this post the address range served by DHCP changed from 10.0.0.x to 192.168.1.x. The new DHCP server gives 192.168.1.1 as gateway and DNS server name and not the public IP addresses of our internet provider.
After reconnecting our client machines everything worked just fine on the win-xp boxes, but the Debian Squeeze servers and Ubuntu 10.4 clients all started to get network timeouts. If I ping public websites it works but browsing to the same servers fails. Other services like POP3 and IMAP also fails. All machines use WiFi to connect and the access point is the same as before.
What could it be that make the debian boxes fail? My laptop runs squeeze too and also fails. But when connecting to various other access points at hotels and such I do not get this problem.
Another weird thing is that the debian server running virtualbox cannot do things online but the virtual windows boxes running on this machine can. Weird! Where should I start looking? How is networking/dhcp clients on Debian different from Windows XP?
There is something strange going on with Pidgin in Debian 6. I have just installed the system, then Pidgin, then configured my MSN accounts and chatted; but after rebooting, it no longer works. It just hangs while trying to connect - this is what I see from strace:
[Code].....
- a largish number of times. My very rough and ready thoughts about this so far are that it is probably not Pidgin that has an error, since 1) It worked initially, and 2) I am pretty sure the developers would have know about it very quickly if this was a general problem in Pidgin. On the other hand, my networking seems otherwise to be fine - s what is going on here?
I have migrated over to Fedora 11and system works fine *except* I cannot install *any* packages from an RPMhere is the exact error :The name org.freedesktop.PackageKit was not provided by any .service files
View 2 Replies View RelatedOn my Acer netbook (AOA-150-1635) the wireless works fine with WinXP, Ubuntu, and used to work with Suse 11.1. I replaced the Suse 11.1 with a clean network install of Suse 11.2. I couldn't get the wireless to work and did another network install using the wireless. When the install was completed I could not get the wireless to work with Suse 11.2. When I run the "collectNWData.sh" it shows--
!!! CND0120E: Network card wlan0 has no IP address
wlan0 Interface doesn't support scanning : Network is down
[code].....
I looked up error CD0120E and changed the network devices setup to "traditional". The wireless "scan" picked up the routers and I added the encryption keys. Still no joy. I ran "collectNWData.sh" again and it said it is better to use the Network Manager.
!!! CND0180I: The system can't ping external IP address 195.135.220.3
!!! CND0150E: There might be a problem with the default gateway definition 10.1.1.1 on interface eth0
[code]....
Going back to Yast, Network Devices, I set Network Manager. The result is that it is back to the beginning with "collectNWData.sh" giving the original error.
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
View 8 Replies View RelatedI have a working LDAP-server (I belive!!) I want my laptops to authenticate against the server, when they logon. That works fine as long as the network is present. But I also want the users to be able to log on, when the network is down. When I go to a terminal (without network) I can su to another LDAP-user.I can login via graphical login-screen with the network attached, but not when it is disconnected.
In a terminal id john gives me information about the user john.
My conf. files looks like this:
/etc/ldap.conf
host 172.16.0.138:389
ldap_version 3
bind_policy soft
[Code]...
My Windows machine can ping Ubuntu by name, but Ubuntu can only ping the Windows machine by using it's IP address. This was working fine in both directions until I purged Samba. After purging Samba, I couldn't ping in either direction unless I used the IP address. I did some reading and found that Samba provides NetBIOS functionality that allows the machines to resolve host names without a DNS. Since I'm not running a local DNS, I decided to reinstall Samba. Unfortunately, I've not been able to restore it to full working condition. I don't want to use hosts files as all the IP addresses are assigned automatically by DHCP. I want to be able to access the Windows machine by name.
View 9 Replies View RelatedI have Ubuntu 10.10 installed for some time now and I don't boot my Win7 machine in weeks!I love how solid, robust it is... and also how good it looks.Love the features like Ubuntu One (use it a lot!) and the Software Center. I'm 95% converted and I would be 100% if it weren't for 2 issues:
1 - The machine won't shutdown. Rebooting works fine but shutdown it just hangs... Kinda sucks having to press the Power Off button every time...
2 - I'm on a laptop but it doesn't recognize my battery. All I get is a "electric ray" on the panel. Even if I remove AC power it still does the same... No charging information, nothing... I tried
Code:
sudo modprobe pmu_battery
on the terminal but is says that the module could not be found.
Everything else works terrific (better than Windows!) with this two exceptions...
I have to report that I am unhappy with the idea of taking away Gnome. I use a tablet, thus I use CellWriter. CellWriter works fine on 11.04 in Gnome but not in Unity. Additionally, CellWriter uses a system tray icon, which doesn't exist in Unity. I don't like my destop experience in Unity. It doesn't agree with the way I interact with my computer.We have Ubuntu, Kubuntu, and Xubuntu. I would like to request that we fork a Unity distro and keep a Gnome desktop for users to choose.
View 9 Replies View Related