I use gdm3+XFCE on my box (amd64, debian testing).
Recently, when I start my XFCE session, I have been getting this error message
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject
Even starting a new XFCE session will not work. So far, it looks that this error message has no consequences, but it is annoying....
Recently when I try to see the properties of any file in nautilus (3.14.1), the program show this error message before the file properties GDBus.Error:org.freedesktop.Tracker1.SparqlError.Internal: Error opening database
View 0 Replies View RelatedOn Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
I'm only partially new to Linux. I'm running Fedora 11. I've just set up two machines, I thought to be identical. Evidently I missed something. I had some problems getting the network started on the second machine, and I must have forgotten a name change somewhere. Anyway, after doing lot's of comparisons between the boxes, editing and renaming and re-linking the ifcfg-GigaStorey file, they are both functioning. The problem is that whenever I start or restart the network on box 2, it reports the following error:
Bringing up interface GigaStorey: RTNETLINK answers: File exists
Error adding address 192.168.1.6 for eth0.
[ OK ]
The file ifcfg-GigaStorey is linked in the following directories
/etc/sysconfig/network-scripts
/etc/sysconfig/networking/devices
code....
Like I said, it's not super critical, just annoying. The networking comes up ok, but the error is puzzling. I figure if I learn what this problem is I'll be one step closer to my Linux beanee.
After having problems with lxde crashing while running Jessie, and re-installing Wheezy, I am not able to mount my WinXP drive. In the past I was able to run pcmanfm and mount the drive from there. It would ask for my root password and then would mount the drive. Now, however, when I click on the drive icon it gives me an error message saying authentication required.
One thing is that when I installed Wheezy I had the WinXP drive disconnected so as to not inadvertently install Wheezy on the wrong drive (I have two identical drives). After installing I connected the WinXP drive and then did a grub update. I can boot either drive, as expected, but I can not mount the WinXP drive from pcmanfm. Do I need to change the Policykit?
I am trying to login as root but i end up with an error that says: su: Authentication failure
View 10 Replies View RelatedI am having an error during my Oracle 11g R2 installation on Fedora 13 that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button to skip this error. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
[code]....
i try to compile my SD_APP.cc but i encountered a error, how do i resolve this?
In file included from SD_APP.cc:1: SD_APP_HDR.h:6: fatal error: agent.h: No such file or directory compilation terminated.
I installed today (fresh install) the latest version of squeeze, and after installing kuser, I attempted to run the program (of course as root), so that I can start managing accounts with my preferred application. However, this is what I got when I attempted to run the program:
# kuser
QGtkStyle was unable to detect the current GTK+ theme.
Qt: Session management error: None of the authentication protocols specified are supported
kuser(3136): Session bus not found
KCrash: Application 'kuser' crashing...
sock_file=/root/.kde/socket-hostname/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash cannot reach kdeinit, launching directly.
[Code]...
I get this error when I try and mount a WD Passport external hard drive. Has anyone run into this before?
View 14 Replies View RelatedI installed Jessie with Cinnamon alongside Win 7 - all went quite well though I did have to do a bit of guessing along the way.
Following online tutorials etc, I tried to install sudo from the terminal. It did not go well - some stuff appeared that was not shown in the instructions from many sites. So I abandoned it, or so I thought.
Then I discovered that my root password was no longer recognised. So I reset it, following online instructions.
This was successful apparently, as I can log in as root and see this in the terminal.
But on trying to start Synaptic ( and later others), I found that the new root password would is not authenticated, but my user password does authenticate successfully. This seems to be the wrong way round!
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI'm using debian lenny (5.0.4) on 3 different laptops, two fresh installs and one was installed with etch and then updated.In the one that has been updated pairing works without any problem, while in both the others it doesn't work. I can see this on syslog when I try pairing from the phone:Jun 15 10:31:02 robertof-lt hcid[17891]: io_capa_response sba=00:22:5F:00:C2:1F, dba=C0:38:F9:D3:29:A3)Jun 15 10:31:02 robertof-lt hcid[17891]: io_capa_request (sba=00:22:5F:00:C2:1F, dba=C0:38:F9:D3:29:A3)Jun 15 10:31:04 robertof-lt hcid[17891]: No agent available for user confirm request
View 1 Replies View RelatedI have tried to install pypar2 on my system through an rpm package on a website, but I get the error code: repository already exists.
View 3 Replies View Related1)I had download one hello.c for start working for Device drivers , and compile it . . I am using linux kernel 2.6.xx getting this error :
Error : linux / module.h file donesnot exists .
2) ad build the kernel and still getting the same error .
I've upgraded my raid array, and to make it boot I had to regenerate the initrd image (the root was on the raid drive)using
mkinitrd <img file> <kernel version>
after that at boot i always receive this error:
error inserting /lib/raid456.ko: -1 file exists
when I try to install drivers for my network card I receive an error message 'Repository already exists'
View 5 Replies View RelatedI'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
View 8 Replies View RelatedMy kernel is not updating and I'm getting errors like.........
[Code]...
I recently set up a Linux VPS and installed JDK 6u20 on it; I tried running a class and here's the result
Code...
The file "Server.class" is in the location I specified - why am I still getting the error?
I have some problems with CentOS 5.4 and standard kernel 2.6.32.7, which I need for realtime extensions.With the solution in this thread: [URL] I could boot the new standard kernel , There are still two error messages during the boot process:
"insmod: error inserting /lib/dm-region-hash.ko -1 fikle exists"
and a problem with ip-tables "could not restore ip-tables line 20" or so
I am trying to install the apr port on freeBSD and I get the following error:
Code:
===> Checking if devel/apr already installed
===> An older version of devel/apr is already installed (apr-db42-1.2.8_2)
You may wish to ``make deinstall'' and install this port again
by ``make reinstall'' to upgrade it properly.
[code]....
So the title pretty much sums it up. She is running a pangolin performance which came with lucid while I am running a pangolin performance which came with karmic and i upgraded to lucid (bought before her). For some reason hulu always worked for me, so I was trying to fix it on her computer too, but somehow one of the commands I told her to run made her computer not be able to recognize that her built in webcam exists anymore.
The reason that this is so hard is that I don't remember which commands I told her to run, but one of them was the instructions from post #5 on this page: [URL]. But I don't know how messing with flash stuff could have possibly screwed up her computer detecting her webcam. The drivers are definitely installed for webcam, however when she 'locate uvcvideo' it tells her that permission is denied, so the problem might be that her computer isn't giving her the permission to access the webcam drivers to use the webcam, just an idea.
I need a script that dose the following checks if files exists by read input from a file then compares them to the files listed in the directory if they don’t exists the script would report back which file dose not exists. I also need to format the output so that files are grouped in different groups, group A, B, and C and etc based on file name. I would like the output of that do not exists files to be sorted based on second number in the file name than group according. I understand some of the basics of bash scripting something along of the lines of a loop and if statements might do the trick. Below is what I have so far. I don’t car so much about the script reporting back the file exists I prefer to only know if the file is missing and is less than 3 days old. Problem is if a file dose not exists in the reports file the test compares against the wrong file.
Group A
Foo22000.tar.gz
Foo22010.tar.gz
Group B
foo25000.tar.gz
foo25100.tar.gz
Group C
foo26000.tar.gz
Code] ....
I'm installing a small application for BankID. Installation is made through a shell-script, applikation installed in /usr/local/lib. Everything seems to go fine, but when I try to start the application I get error message: Code: /usr/local/lib/personal/personal.bin: error while loading shared libraries: libidn.so.11: cannot open shared object file: No such file or directory But libidn.so.11 is there (64-bit system so checking both lib & lib64):
[Code]...
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
View 6 Replies View RelatedMy network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/
Code:
* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
[code]....
I have this:
[Code]...
which runs a program. But I want to add some thing to it so that, if the subject contain a particular string, the program shouldn't be run. How do I do that?
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies View Relatedwhen a remove a user from the system using the domain userdel guest the user gets removed but the /home/guest doesn't get removed so i remove it by command rm -rf /home/guest then i recreate the user by giving in the command useradd guest now it gives the error mailbox file already exists what does it mean when it says so though this command creates the user.
View 3 Replies View Related
