Debian Multimedia :: Installing CODEBLOCKS IDE On Jessie 64-bit
Jan 6, 2016
I am running Debian jessie 64-bit with GNOME 3.14.1. I would like to install the CODE::BLOCKS IDE, described here: [URL] ..... I follow the tutorial for Debian, but having added
Code: Select alldeb [arch=amd64,i386] https://apt.jenslody.de/stable jessie main
deb-src https://apt.jenslody.de/stable jessie main
to Code: Select all/etc/apt/sources.list, I then run "sudo apt-get update". This gives me the error
Code: Select allE: The method driver /usr/lib/apt/methods/https could not be found.
N: Is the package apt-transport-https installed?
Is it safe to go ahead and install apt-transport-https? I really don't want to ruin my Debian-installation...
I want to install CodeBlocks 10.05 using the Codeblocks Debian binary package from [URL], which requires upgrading to a newer version of wxwidgets than Ubuntu provides. So I followed the instructions at wxpython.org adding their gpg key and adding their repositories to my sources.list. But when I ask Synaptic to Mark All Upgrades, it warns:
Quote:
You are about to install software that can't be authenticated! etc., etc...
In Settings/Repositories/Authentication Robin Dunn's (the xwPython creator) key is listed, and if I simply run sudo apt-get -s upgrade in a terminal, apt doesn't complain at all. It gives:
Code: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded:
I am using ubuntu ultimate edition 2.4(karmic). I installed codeblocks a few weeks ago.It was working fine.But today i installed updates and now it doesnt run.When i click it to start then it says starting codeblocks for sometimes and then nothing happens.I tried to open it from terminal and i found this message
/usr/share/themes/Cylon Eye '72/gtk-2.0/gtkrc:79: Unable to locate image file in pixmap_path: "Others/focus.png" /usr/share/themes/Cylon Eye '72/gtk-2.0/gtkrc:82: Background image options specified without filename codeblocks: relocation error: /usr/lib/libcodeblocks.so.0: symbol _Z18wxSafeConvertWX2MBPKw, version WXU_2.8.2 not defined in file libwx_baseu-2.8.so.0 with link time reference
So, I did the upgrade to Jessie today and everything went fine and I do like the gray look of the Gnome Classic Desktop. Not much change here.
But it is impossible for me to install the 3.16 kernel.
When I try, I get the following error (sry, it's german, but you should get the point):
Code: Select allE: /var/cache/apt/archives/linux-image-3.16.0-4-amd64_3.16.7-ckt9-3~deb8u1_amd64.deb: Extrahierte Daten für »./lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko« können nicht nach »/lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko.dpkg-new« kopiert werden: Es konnte nicht geschrieben werden (Auf dem Gerät ist kein Speicherplatz mehr verfügbar)
It basically says, there is not enough space on /lib to copy the modules for the new kernel. (I have about 100M free there.)
So, as you can see, there isn't that much space on / at all - don't blame me, blame the Lenny Installer. Personally I can live with the 3.2 kernel but I wonder if there is any possibility to install the never one without a total re-partitioning.
I have installed before with ease following the Debian how to. On jessie 8 I have an issue with black screen, probably miss configuration but can't figure what?
I want to learn Apache Spark and I wanted to install it on a Debian Jessie pc, but it seems the packages are not in the repository. Should I download it and install it manually?
What is the best choice for the underlying distributed file system. Obviously I need to setup a stack of tools as simple as possible. Any link to tutorials for Spark on Debian, I keep finding stuff for Ubuntu.
I'm just trying to install a Jessie i386 image in Oracle Virtualbox.
My host specs are: Windows 7 Home Premium x64
Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.
When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..
I am trying to install this software: [URL] .... on jessie.
I have copied lib/libIsles64.a into lib/libIsles.a and done
Code: Select all sudo make cleanall
from the main folder. When I write
Code: Select allsudo make
I receive the error
In file included from src/Interface/neBEMinterface.c:20:0: include/Isles.h:14:29: fatal error: gsl/gsl_complex.h: No such file or directory compilation terminated.
After installing Jessie, apt-get gives me a huge list of packages with the suggestion to autoremove them. Now, I've tried auto-remove once and was left with a naked Gnome, so I was wondering if there's another way to find out which packages I should keep and which I can safely remove. Is it safe to delete packages that cannot be found using the search function for the stable release? I checked them one by one here URL....How about linux images that won't appear in the above search?
My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb [sudo] password for ert: Selecting previously unselected package cndrvcups-ufr2-us. (Reading database ... 155527 files and directories currently installed.) Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ... Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common [sudo] password for ert: Reading package lists... Done Building dependency tree Reading state information... Done Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I recently upgraded from wheezy to jessie and everything went as planned with dist-upgrade. However I just noticed that I can't play any video file. I thought about upgrading vlc, as it was already installed but it had dependency problems. So I tried to remove it
Code: Select allsudo apt-get remove --purge vlc
Then If I try to install vlc I receive this message:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
vlc : Depends: vlc-nox (= 2.2.0~rc2-2) but 2.0.3-5+deb7u2+b1 is to be installed Depends: libvlccore8 (>= 2.2.0~pre1) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.2.0~rc2-2) but it is not going to be installed Recommends: vlc-plugin-samba (= 2.2.0~rc2-2) but it is not going to be installed Breaks: vlc-nox (< 2.2.0~pre2-2~) but 2.0.3-5+deb7u2+b1 is to be installed E: Unable to correct problems, you have held broken packages.
Now, I thought about removing vlc-data but I received this message saying that 253 packages will be removed (624Mb worth of applications). Am I uninstalling my entire system with this?
This is my sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free deb-src http://ftp.us.debian.org/debian stable main contrib non-free deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb-src http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free
- Debian boots normally - I get the login screen - Once my credentials entered, I see only the grey foreground of the login screen for a couple of seconds, then a black screen with a prompt for like half a second and then I'm back to the login screen. No error message, nothing.
When booting in recovery mode and use startx, it works fine (it's my setup at the moment). From there, if I start gdm3 (systemctl start gdm.service), I get the black screen with a prompt and I can do nothing, I have to shut down directly by pressing the button.I tried to add Debian-gdm user to the video group (even if I don't use nVidia drivers), to replace gdm by lightdm and even to remove any display manager but the issue is not solved.Here are some outputs:
Code: Select all# dpkg-reconfigure gdm3 Job for gdm.service failed. See 'systemctl status gdm.service' and 'journalctl -xn' for details. invoke-rc.d: initscript gdm3, action "reload" failed Code: Select all# journalctl -xn -- Logs begin at Tue 2015-12-29 19:16:26 CET, end at Tue 2015-12-29 20:20:55 CET
[code]....
Since removing gdm didn't change anything, I assume it doesn't have anything to do with it but still.
I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 109 (X_ChangeHosts) Value in failed request: 0x5 Serial number of failed request: 6 Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
A few weeks ago I have installed Debian Jessie on KDE Desktop Version. I have a problem with the Display Manager Kdm, if i log out session the monitor turns off (DVI No Signal), the only option that I have it's forced shutdown or reboot via power button. I try another DM lightdm and this works fine. But i liked to know why log out session crash on Kdm.
Adding : TerminateServer=true at the end of /etc/kde4/kdm/kdmrc (Section :[X-:*-Core], solve the issue.
I'm trying to install KDEConnect on my 64 bit Debian system. It's failing because of dependencies.
Tried installing the first dependency, sshfs. It said it cannot find the 64 bit package. So, I tried the 32 bit. That one depends on fuse. Tried to install fuse 32 bit. hat depends on sed. Tried installing 32 bit sed, but the package manager said it's risky to replace 64 bit sed with the 32 bit variant.
I stopped here thinking that I'm risking some stability and the road to the finish line is not visible till the end, meaning I might lose hours trying to do something that fails at the last step. This happened to me few times in the past (with other software) and I really don't want to repeat the incident. I need a stable system and I need my time.
The question is: how to get installed kdeconnect package on Jessie 64 bit ...
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 2275.960] X Protocol Version 11, Revision 0 [ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
I'd like to have acestreamplaer installed in jessie, but I am not able to do it....
I tried with Acestream repos: deb http://repo.acestream.org/ubuntu/ saucy main
But I cant install it, I got this
acestream-player-data : Depende: libavcodec53 (>= 4:0.7-1) pero no es instalable o libavcodec-extra-53 (>= 4:0.7-1) pero no es instalable Depende: libavformat53 (>= 4:0.7-1) pero no es instalable o libavformat-extra-53 (>= 4:0.7-1) Depende: libavutil51 (>= 4:0.7-1) pero no es instalable o libavutil-extra-51 (>= 4:0.7-1) Depende: libdvbpsi7 (>= 0.2.0) pero no es instalable Depende: libupnp4 pero no es instalable o libupnp3 pero no es instalable Depende: libx264-120 pero no es instalable
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
I recently updated my Debian Jessie and somehow that update broke my Debian. I have a Gtx 465 and this has been working fine under Jessie for a year.
After the update I no longer have X running. I tried removing all the Nvida stuff and reinstalling 304-legacy which did not get the Xserver back. I also tried to install Nvidia 304 driver binary but this time it refuses to compile ;( So I am out of luck at the moment.
I am runing Jessie Linux 3.18 Nvidia 465 Gtx Intel Cpu
Code: Select all built-ins [ 41.306] (==) ModulePath set to "/usr/lib/xorg/modules" [ 41.306] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 41.306] (II) Loader magic: 0x7ff757496d80
I have installed clementine and when i press Music-->Exit, clementine still running in the background. Only works "Kill" the process through the KSysGuard or htop application.
To re-produce:
*Open Clementine. *Exit UI interfaz (Music-->Exit). *Clementine still running in the background. *Kill the process e.g throught KSysGuard ( monitor system kde) or htop application.
By freeze, I mean that the mouse can still move, but everything else behind it is frozen entirelyI can switch to a terminal with CTRL+ALT+F1, it's ... I guess... X or gnome-shell or something that's frozen? Not the whole OS thoughThese freezes last anywhere between 5 or 10 seconds and 3-5 minutesI can't predict when they will occur, but often, after a suspend/resume, they will start occuring much more frequently. Also, they often happen after I enter my password and press ENTER on the lock screen after a resume from suspend. But not exclusively -- they can happen at any other time when I'm doing pretty much anything in GNOME...
Things I've Tried...
When frozen, I've tried to CTRL+ALT+F1, login, and run gnome-shell --replace... [*[When frozen, I can successfully CTRL+ALT+F1 and run `service gdm restart`... with the obvious downside of losing everything I have open. But the screen responds immediately and I can log back in to GNOMEI tried running `Xorg -configure` to generate an /etc/X11/xorg.conf file to edit, but received an error about not being able to generate configuration for multiple screens or something (I can retry and provide the exact error if this is a useful direction to try) is it the gnome-shell freezing? Is it X? Is it a problem with the X driver I'm using?
I've been using debian for well over a year, previously with the gnome desktop. I never really liked how much memory and CPU it used, but many things like the hotkeys worked out of the box, and it was relatively easy to configure. After upgrading to Jessie I decided I'd give LXDE a go given it was lightweight and seemed more complete than e17.
However, after over a day struggling to get everything to work just right, I am still unable to use use my hotkeys (volume control, brightness control, etc.). The volume can be controlled through the GUI, but the brightness seems to have no control whatsoever. In any event, I installed the drivers and firmware for the hardware and used the instructions in the link to try and configure the key bindings, but nothing has worked: [URL] ....
:Questions#Change_hotkeys I'm not sure what to do now.
