Debian :: Moving SSD With Installation To Another Laptop
Sep 24, 2015
I've installed years back Debian on my laptop. Last year i did upgrade, i putted an ssd in my old laptop which works great with debian.
Now I bought a new laptop, to replace my old one. Because my new laptop doesn't have an SSD installed, i want to replace the harddrive by the SSD from my old laptop.
Now so said, so done. I replaced the hard drive easy by the ssd. Now if i boot the new laptop with the ssd installed i'm getting message from EUFI/BIOS that there is no OS installed on the ssd???
Debian is installed on it! If a place back the ssd in my old laptop, it's booting like it should, so it's working. Why is EUFI/BIOS think there is no OS installed? Debian is installed on the ssd so it should work i think?
View 4 Replies
ADVERTISEMENT
Feb 20, 2010
I have been learning Debian by using a virtual machine. After fine-tuning my installation procedure, I decided to copy that installation to my physical system. The hard drive already has another Linux based system installed. I plan to dual boot.After copying files I updated fstab and menu.lst.The partition scheme between the virtual and physical environments are similar, but the partitions are not mapped exactly the same.Thus the Debian system on the physical hard drive fails to boot simply because the initrd is created for the root partition location on the virtual machine. The initrd created in the virtual machine is looking for the root file system on /dev/hda1 whereas on my physical drive the new location is /dev/sda7.How can I rebuild the initrd on the physical system? I started to use the installation DVD in rescue mode, but I did not get too far.
View 6 Replies
View Related
Apr 2, 2011
I'm wondering I've read in some places that if people would like to move from a stable branch of Debian to the testing you can usually just replace the lines in sources.list with the testing release and update and then dist-upgrade. Is this true...and if so is it safe?
View 1 Replies
View Related
Sep 9, 2011
My Debian Lenny box has two hard drives: a smaller one, upon which I installed the system and a 500GB drive which, during installation, I assigned for mounting as the "/home" directory. A few days ago, the smaller (system) hard drive crashed. Although fsck was able to make the drive mountable again, many system files (esp. things like inittab) were lost.
Since the machine, itself, had actually been pretty old when I first installed Debian (Etch, originally), I am going to be replacing it with a new system and I have a few questions about getting this all done.
First of all, the old computer was a Pentium 4 and the new one is a Dual-core, 64-bit Pentium (E6600) with 4GB RAM and a 500GB SATA drive. I'd like to install 64-bit Debian Squeeze onto that drive and, since I've never used the 64-bit Debian before, would like to know if there are any pitfalls or caveats - especially any dire reasons I should stick with 32 bits, instead.
Next, I would like to keep the other 500GB (IDE) drive mounted on "/home" so that my things would be where they already were on the old system - especially files relating to Iceweasel and Icedove. Of course, there are no binaries on that drive, since I had all of that on the drive that crashed, but are there any other things I must take into consideration? Also, what would be the best way to make that drive "/home" during the new installation without wiping it out, but having it ready for when I create the users so I can point them to their appropriate directories?
Finally, since the old computer had been an Etch system that had been upgraded to Lenny and since I would be installing Squeeze (and, likely, the 64-bit Squeeze, at that) onto the new system, would there be any problems with the above scenario, considering the potential of older configuration files, etc. on the old "/home" drive?
My subject line says, "Updating while moving to new machine," but these really may not be "update" questions, per se. Then again, the presence of that old hard drive does introduce some update-like elements into the equation, and that is why I am asking these questions.
View 1 Replies
View Related
Apr 28, 2015
I got a rather big problem since an attempt to upgrade.My debian version is 8.0.I upgraded when apt proposed the change. I did that in two steps, with apt-get upgrade and then apt-get dist-upgrade, with the installation of a new kernel. I moved from 3.2.0-4-686-pae to 3.16.0-4-686-pae.Since the upgrade, I can't boot my system any longer.During the boot sequence, this message appears with a countdown (it's copied by hand) :
Code: Select all(1 of 4) a start job is running for dev-disk-byX2du
At the end of the countdown, the boot sequence starts again, and ends up on an invite to log in as root in rescue mode. I can't connect (maybe due to some azerty/qwerty issue, I got a French keyboard. I tried to type in "qwerty mode", with no success (the password is not prompted)).I can connect with the 3.2 kernel however, selecting it form the grub interface. I can't log in in rescue mode either, but with this kernel the boot sequence goes on and I can log as a regular user or as root, at the end of the boot sequence. There is no X, but the system seems to work.What could I do to make the system boot properly with the new kernel, or to go back to the 3.2 version ?
View 14 Replies
View Related
Feb 9, 2011
I have been using Mandriva2010.1 on my laptop and I love it !
But today (just for fun), I removed the laptop harddrive and connect to my desktop via sata1 (so it will boot up the same "sda1").
It boots up.. i even see the STARTING UDEV..
but it bring me to ..
Code:
INIT: going to single user
sh-4.0#
I typed "startx" and it booted up to Mandriva desktop.. but keyboard and mouse doesn't work ! Maybe because it was looking for the laptop touchpad / keyboard.
Is there a way , while its BOOTING UP, to interrupt the bootup process and make it detect new hardware ?
View 6 Replies
View Related
May 13, 2010
I'm having a very faint but noticeable electric-like buzzing/grinding. It is not the hard drive but sounds very similar.
It occurs when i move scroll bars, or drag windows. It is highly replicable.
The only other time this has happens is when i install KDE which resulted in me reinstalling. Something id prefer to avoid. I haven't installed KDE this time, but this seems to have started immediately after replacing my fstab file which i accidentally deleted. That's the only thing i can think of.
View 7 Replies
View Related
Oct 9, 2010
I have a question: I'd like to install Debian next to Ubuntu 10.04 on my laptop. I've been searching on the web but I can't figure out what to download and what to install. My laptop is an Acer Aspire 1355LC that runs on an AMD Athlon XP processor. Also when I install Debian, will it recognise my Linksys WUSB 54 wireless device? (I've read somewhere that it could be that WLAN connections aren't supported with the net instal Cd) I know there's a lot that I'm asking, but I really want to learn more about Debian.
View 6 Replies
View Related
Aug 6, 2010
I have an old Hitachi laptop, PII-266, 256MB RAM, 20GB HD, 1024x768 screen. It has a floppy drive, a usb (1) port, and in-built 10/100BaseT ethernet. I cannot boot from USB, or ethernet directly. I would like to boot from floppy and install over network. Is this possible?
View 6 Replies
View Related
Feb 11, 2010
I just want to install debian on mine laptop.
here is mine system configrationhttp://74.125.153.132/search?q=cache:8FAQGq76ttsJ:www.hclinfosystems.com/9100%2520BT.pdf+hcl+lx+infiniti+powerlite+9100+bt&cd=1&hl=en&ct=clnk&gl=in&client=firefox-a
so i want to download the iso image which one i have to download and write.
View 1 Replies
View Related
Aug 13, 2015
I burned a live dvdrw with the hybrid live cd of debian 8.1 gnome and installed Debian onto the 32gb usb stick like this
8gb for /
22 for /home
2gb for swap
after chrooting into the usb stick with the live dvd-rw and installing grub2 there again cause the installation couldn't do it without chrooting first.. I wasn't able to boot from the laptop I installed Debian with but I could on my Desktop PC.
I wondered if you needed a copy of my grub.conf? so here is the pastebinnet of /boot/grub/grug.conf
[URL] ...
View 14 Replies
View Related
Dec 30, 2015
I've just installed new Debian 8 from live CD, lxed. The problem is urgent, I cannot do anything on my laptop, the computer keeps on suspending/hibernating every 30 seconds or so.
View 4 Replies
View Related
Apr 3, 2016
I was running Windows 10 on MSI GT70 2OD-064US hoped to dual boot first had three primary partitions shrunk largest one and ran debian-8.3.0-amd64-netinst.iso chose guided install with remaining free space, didn't force UEFI asked if I wanted to install GRUB after finding Windows Vista (loader) I went ahead and installed. Couldn't boot afterwards with dark screen saying no install media, changed BIOS to legacy mode and got grub prompt followed tutorial and entered these commands:
grub> set root=(hd0,5)
grub> linux /vmlinuz root=/dev/sda5
grub> initrd /initrd.img
grub> boot
This caused it to boot without GUI I ran grub-update and restarted back at grub> again. How to get debian to boot or even windows 10 again?
View 5 Replies
View Related
Feb 19, 2010
I have been learning Debian by using a virtual machine. After fine-tuning my installation procedure, I decided to copy that installation to my physical system. The hard drive already has another Linux based system installed. I plan to dual boot.After copying files I updated fstab and menu.lst.
The partition scheme between the virtual and physical environments are similar, but the partitions are not mapped exactly the same.Thus the Debian system on the physical hard drive fails to boot. I think the initrd created in the virtual machine is looking for the root file system on /dev/hda1 whereas on my physical drive the new location is /dev/sda7.How can I rebuild the initrd on the physical system? Or how can I build an initrd in the virtual system that will function on the physical system.I started to use the installation DVD in rescue mode, but I did not get too far.
View 4 Replies
View Related
Jan 30, 2011
I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
View 7 Replies
View Related
Sep 13, 2009
I have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies
View Related
Feb 1, 2010
i try to install a recent squeeze of this January on a new laptop, HP dv6-2044el. The installation get blocked on the "Detect network hardware" step. The network interface is a "Realtek RTL8168d/8111D Family PCI-E GBE NIC controller".
View 1 Replies
View Related
Apr 19, 2011
anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
View 13 Replies
View Related
Mar 27, 2011
I like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies
View Related
Aug 17, 2010
I'm trying to start using Debian Squeeze 64b on my laptop, which is Dell Latitude D830 with Intel i965GM.
After Debian installation, when system should display some nice background and window which please me to log in, I see my screen gets blank, fuzzy, blank again, ...and after several times finaly all hangs. Surprisingly mouse pointer is displayed nicely and works. I can't use network on Debian becouse of windows authorization program which i can run in wine on KDE. This works on Kubuntu.
What I did already:
I installed KUBUNTU 10.04 LTS and it's doing job well.
I installed Debian Squeeze with options:
- enabled:base system, laptop
- disabled:graphical environment
After instalation I logged in on root account and did:
1. aptitude install xserver-xorg xbase-clients xfonts-base xterm
2. aptitude install kdebase kde-i18n-pl
3. aptitude install kdm
4. reboot
5. problem occurs
@2: Googling everywhere i found several installation guides pointing to instal pure KDE by installing kde-core package, but it seems Squeeze does not have it.
@3: Unfortunately this command did not install nor update anything.
All I want to do is to install pure Debian with xorg and kde core (not full kde package) for later customization.
I tried to:
- generate xorg.conf (X -configure) and place it at /etc/X11/
- use xorg.conf working for other people in web.
- dpkg-reconfigure xserver-xorg
- googling & forum search for my specific problem and for errors found in syslog; with no working solution.
View 4 Replies
View Related
Feb 16, 2010
I wish to use my laptop to create a system for my Soekris 4801. I don't want to take the server down for the lengthy install ( took 6 hours last time, Fedora 5 ). I want to create the image on a USB drive for the 586 Soekris server on my 686 HP laptop. Then scp the image to the Soekris and reboot and configure the server.
View 3 Replies
View Related
May 29, 2010
I was looking around in Xfce4 Taskmanager to see what's taking up some memory/processor power, and I noticed when I move the cursor around in cirlces, the CPU spikes from about 5%-10% clear up to about 40%. I also have Audacious2, Chromium, and a file manager open as well.
Why is this? My system is an Eee PC with a 1.6GHz Atom processor and 2GB of DDR2 RAM.
View 10 Replies
View Related
Dec 20, 2010
I recently installed Debian (*former Windows user*) with xfce and I only aligned one partition. I have a 80gb SSD where I have the OS and apps. I just now installed a hard drive which I'm going to use for documents, pictures, music etc., but I haven't mounted it yet. I'd like to move /home to it's own partition on the second drive, and I'd like the desktop to be on the HDD also, but I don't really have any idea how to do this and haven't found any information about this (that's why I haven't mounted the HDD yet either). I'd like to keep the SSD purely as a drive for OS and apps so if there's anything else I should consider or if there's a better approach for this?
View 14 Replies
View Related
May 18, 2011
I'm running Debian Wheezy on a Dell XPS M1530 laptop, 64-bit.
I'm having a boot problem after moving my /usr directory out of the root partition and into its own partition.
I followed the "easy way" here: [url]
Basically, I moved the contents of /usr to a new partition -- renamed /usr in root to /oldusr -- and edited fstab and tried to reboot... but the boot process wasn't able to find the new /usr.
After using /dev/sda7 in fstab (to no success) I ran blkid to find the UUID and used that (again, to no success).
My fstab is below:
For what it's worth, grub is also looking different -- none of the debian backgrounds that were there previously remain. While it lists the same kernels to boot into the boot (as described above) fails.
View 14 Replies
View Related
Jan 28, 2011
On my laptop, squeeze has /, /boot, /usr, /home and I think /tmp /var on separate partitions. I want more space for apps and to not have to be so frugal with /home. Earlier this week I shrank sda1, freeing up 40 GB. I wanted to start moving the squeeze partitions, but GParted logically enough denied it since they were mounted, duh. I'm glad for that, because I was getting overeager and hadn't made even a full system backup.
This is one of those situations where choice, while good, makes it hard to get started. I wouldn't mind using dump, but doesn't it inefficiently copy the whole partition regardless of empty space? I figure tar could do as well, but is it a problem that it doesn't preserve all the meta info? As a starting point, I'd like to have an "quick" and safe way to make sure that if something happens while moving partitions, I can do a restore. I can progress to more optimal solutions later on, like semi- or fully automated incremental backup.
So what is a sure-fire way to do this while preserving all info? Should I stick with something like clonezilla, can I manage it from within Debian (CLI, ready-made script, GUI), is there a still better way?
View 5 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
May 1, 2011
I've been thinking about moving from Gnome to Xfce for atleast something more lightweight and etc. But I do not know of any good ways to completely remove Gnome without issues and etc. removing all of Gnome? And does Debian Squeeze have Xfce 4.8?
View 14 Replies
View Related
Mar 27, 2011
I am thinking of buying the ATi card. Two things I would like to know from other ATi users:
1. Does compiz-fusion work without issues?
2. Given I have an i7 920, given there is no vdpau for ATi; the i7 should be able to handle the strain of say a 1080p video with little fuss?
View 4 Replies
View Related
Dec 30, 2015
I installed debian 8 on a 16 GB usb drive using this guide. I used a debian 8.2 64-bit image with mate. If I were to get a larger usb drive, would I be able to transfer everything from the 16GB drive to it? How?
View 1 Replies
View Related
Jul 29, 2015
I ping my router. If I keep my mouse moving (or i'm typing) I get a 5ms ping.If I stop typing/moving my mouse, it times out.
- I disabled NetworkManager for the inteface eth0 but it doesn't solve the problem.
- I'm having the same problem using a Ubuntu 15.01 bootable image
- I'm having the same problem usign an Ethernet PCI Adapter
- I'm having the same problem usign a Wifi PCI Adapter
lsb_release -da
Code: Select allDistributor ID: Debian
Description: Debian GNU/Linux testing (stretch)
Release: testing
Codename: stretch
[code]....
View 5 Replies
View Related
