I recently installed Squeeze. Almost every time I install software I have unresolvable dep errors. In my Software Sources Everything is checked Main, Contrib, Non-Free and source. But in 3rd party the only thing in there is the installation CD. Is this correct or am I missing repos? downside of running testing? If I'm missing them could someone please post what repos I should have...
View 6 RepliesI am currently in the process of moving around 20TB of data from one server to another. Security is not a concern, since the data are freely available to anyone on our network anyway. There are a couple of things that I'm trying to decide on:
(1) protocol choice
Of all the choices I have--nfs, ftp, scp, rsync, samba--has anyone done any benchmarking to show which would be the fastest/most robust transfer protocol? I know nfs has slow write speeds for synchronous transfers. Asynchronous would be faster, but less robust. I'm leaning toward rsync since it performs md5sums to confirm the file transfers. (Remember if there's a 1 in a billion chance that a byte will get corrupted, then I'll have 20,000 corrupt bytes in the transfer.)
(2) Nautilus emblems
We use emblems in Nautilus to categorize files. The old and the new server have the same directory structure.Is there any way to copy the Nautilus emblems from the old server to the new server. What I want is that if a user had marked a particular file with a star on the old server, then that file would be marked with a star on the new server when he/she logs in.
I am trying to set a static IP for my wireless adapter (wlan0). I've been getting the error
Code: Select all[....] Reconfiguring network interfaces.... Error for wireless request "Set Encode
" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
RTNETLINK answers: File exists
Failed to bring up wlan0.
Done.
After using the command
Code: Select allsudo /etc/init.d/networking restart
Here is what etc/network/interfaces looks like
Code: Select allauto lo
Iface lo inet loopback
auto eth0
Allow-hotplug eth0
Iface eth0 inet manual
Auto wlan0
Iface wlan0 inet static
Wireless-essid xxxx
Wireless-key xxxx
Address 192.168.3.116
Netmask 255.255.255.255
Gateway 192.168.3.0
I have been running happily on Knoppmyth R5F27 (on Debian GNU 4.0/Etch) for a good long time. Everything has been operating well. My kids get to record their Mythbusters. Life is good. Tonight, though, I tried to make things better. And that was the mistake.
I read that we could use our PS3 to watch videos on Hulu. But, I needed a kind of proxy server or something to mask that I was using the PS3 browser. So, I thought I would install squid on the myth box.
I first tried apt-get install squid But, that didn't quite work. So, at a friend's suggestion, I ran: apt-get update Which had problems, too. Still, being a noob, I reran the apt-get install squid and a bunch of stuff came down. It has problems, too.
So, I turned back to apt-get update and realized there was a problem in sources.list. I updated it to have a more current repository and received the update. Then I realized that the apt-get for squid was pulling down resources for lenny. I struggled trying to kill the install for Squid. Failed. And then rebooted just to see if I have problems.
And I do. Mythbackend won't start. The command to do so produces a segmentation fault. Ditto for mythfrontend and mythtv-setup. I don't know what to do. Can someone help me roll this back to a stable setup of Etch? If you want to see my (very messy) attempt to install squid and update the system you can look at[URL]..
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View RelatedI've created a package and added package conflicts entry in it's control file(in my case, all the lib-mesa packages). Now each package that depends on lib-mesa cannot be installed. How can i define my package as alternative to lib-mesa, so i can install those packages ? Is there a way i can add my package as an alternative in the package dependencies(the ones that depends on lib-mesa)?
View 1 Replies View RelatedIs there a way to find if a package is a dependency of some other package/s that you have installed it.
For instance, let's say there is a library called libkolabxml1
Now if I just install it and ask :-
Code: Select all$$ aptitude why libkolabxml1
Unable to find a reason to install libkolabxml1.
But I remember it being useful/needed somewhere.
I am running Debian squeeze and I am trying to install hplip-3.10.5 so I can use my new HP Photosmart C4750 printer.I downloaded the automatic installer and ran it and it gave me the following error message:
RE-CHECKING DEPENDENCIES
------------------------
error: A required dependency 'cups-image (CUPS image - CUPS image development files)' is still missing.
error: Installation cannot continue without this dependency.
error: Please manually install this dependency and re-run this installer.
So I ran apt-get install cups-image and got the following:
raygo75@RayGo1:~/Desktop$ sudo apt-get install cups-image
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package cups-image
does the package "cups-image" exist? and if it does were can I find it. I have looked to no avail. I have posted a question on hplip seeing as that is were I got the script from.
I tried to compile it but it seems to have one extra dependency after the other that needs to be compiled. I'm assuming that it should work since Google Chrome works for Lenny (apparently). Will it be added to backports eventually or anything of the sort?
View 3 Replies View RelatedEncounter errors of files with "missing LSB tag and overrides". Looking up the recommended website, I found the following instructions.
insserv: warning: script 'X' missing LSB tags and overrides
The /etc/init.d/X script is lacking the LSB fields. Adding them to the script header or as a override file in /etc/insserv/overrides/X would solve it.
But where to get the LSB field? There is a list of known files but those giving problems are not among them.
I have successfully build .deb im my box and it is running well. But during the debuild process I got followingdpkg-shlibdeps: warning: dependency on libatk-1.0.so.0 could be avoided if "debian/retrovol/usr/bin/retrovol" were not uselessly linked against it (they use none of its symbols).
dpkg-shlibdeps: warning: dependency on libdl.so.2 could be avoided if "debian/retrovol/usr/bin/retrovol" were
[code]....
I'm trying to install the driver for my printer, from a repo at Kyoto University. Did it before on other distros (Etch, Lenny,...). One of the three packages has an unmet dependency, libcupsys2-gntls..... (or something- doesn't matter, it's long gone). I expected to be able to use the -d option in apt-get to download it, and unpack it by hand, and place the vital parts in the right positions manually. Done that before, somehow, not necessarily this way. But apt-get won't let me download it, because of the unmet dependency.
Is apt-get really that stupid? If I only want to download it, why does it matter if there is an unmet (and, these days, unmeetable) dependency? Could I download it some other way? I've looked at Aptitude, and can't make head nor tail of it. Synaptic? Have I got the command right? #apt-get -d install package. EDIT: Tried #apt-get install -d package. Also apt-get --download-only --force-yes package. Or I could be really subversive, and copy the two essential files across from my Puppy system. Puppy didn't notice that this lib was missing, just got on with it. Funny old world, isn't it?
During installation of ssh I get an error message regarding dependency problems.
Dependency problems prevent configuring of ssh.
ex: package A depends on package B, C and D I want to remove only C and D and leave A in a broken state. how?
View 4 Replies View RelatedThere may be a way not to download all dependency and install one by one.But how?Sorry for such a basic question but i could find only solutions for ubuntu.
View 6 Replies View RelatedI'm trying to install KDE, but I can't. I've tried using tasksel, but it gave me an error, so I tried to install task-kde-desktop myself. When I did that, I ran into some dependency issues:
Code: Select allSome packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following packages have unmet dependencies:
task-kde-desktop : Depends: kde-standard but it is not going to be installed
Depends: kdm but it is not going to be installed
Recommends: kdeaccessibility but it is not going to be installed
Recommends: k3b but it is not going to be installed
[Code]...
When installing Rstudio from: [URL] .... in Debian stretch I get the following:
Code: Select allDependency is not satisfiable: libgstreamer0.10-0
Dependency is not satisfiable: libgstreamer-plugins-base0.10-0
seems like there's only libgstreamer1.0-0 available in stretch. In sid it's included though: [URL] ....
For the time being I installed the sid versions but wonder what's a proper solution.
Here's my problem: I'm running a Lenny laptop and I need both wifi and virtualbox to work. I had to do a kernel upgrade to run the wifi. It works with either the 2.6.29 or 2.6.30 kernels, but with 2.6.30 I'm having screen brightness issues that I can't seem to get rid of. So I want to run 2.6.29, but virtualbox is a bit of a problem because it requires linux-headers-2.6.29, but when I try to install the amd64 headers it tells me that it cannot install the dependency linux-kbuild-2.6.29. Is there any way I can get that dependency installed on my computer?
View 14 Replies View RelatedWhat is this Dependency Problem. I got the following Error while installing yahoo messanger. What could be the solution or the alternatives for this.
[code]...
My Debian Squeeze server that I'm trying to make a LAMP server is currently a LAM server. I get these errors when trying to install php5:
[Code]....
I've got this weird problem: when I reboot my Debian 8.3 server, I have to run through the crypto unlocking processes for my encrypted volumes a few times before I actually get to a login screen. The operation times out 85% of the time, leaving me to reboot and try over and over until the system is happy.
Here's my partitioning setup (manually partitioned at install):
/boot: 500 MB, EXT2, nodev, nosuid, noexec
/tmp: 2 GB, EXT2, AES-256/xts-plain64 with RANDOM KEY
swap: 2.5 GB, AES-256/xts-plain 64 with RANDOM KEY
/: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/var: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/home: 45 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
Here's the output from journalctl -b -p 3:
Code: Select allDate and time | server name | systemd[1]: Timed out waiting for device dev-sda5.device
Date and time | server name | systemd[1]: Dependency failed for Cryptography Setup for sda5_crypt
Date and time | server name | systemd[1]: Dependency failed for Encrypted Volumes
Date and time | server name | systemd[1]: Dependency failed for dev-mapper-sda5_crypt.device
Date and time | server name | systemd[1]: Dependency failed for /tmp
[Code] ....
I had the same problem in previous builds where I chose Twofish instead of AES, and I was hoping that the timeouts would be fixed by switching to AES as my CPU has the AES instruction set. Obviously that didn't make a damn bit of difference.
What am I doing wrong, or what should I change in my setup? The encryption is a requirement. Could the problem be caused by something as stupid as using a RANDOM KEY instead of a PASSPHRASE on /tmp and swap?
Debian 8.3 as OS version.
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI installed Debian Squeeze with Gnome today. I'm unable to change from the default icon theme. I can change themes, but the icon theme remains default.Things I've tried:
- I've made a new user account.
- .gtkrc-2.0 in my home is auto-generated, .gtkrc.mine does not exist.
# -- THEME AUTO-WRITTEN DO NOT EDIT include "/usr/share/themes/Darklooks/gtk-2.0/gtkrc" include "/home/haunted/.gtkrc.mine"
# -- THEME AUTO-WRITTEN DO NOT EDIT
- I've tried installing a theme into my /home/.themes.
- I've reinstalled gnome-settings-daemon.
- Tried changing themes then doing a full reboot.
- Cursed it periodically.
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedI just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedFound this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies View Related