Debian Configuration :: Rstudio - Dependency Is Not Satisfiable In Stretch

Mar 23, 2016

When installing Rstudio from: [URL] .... in Debian stretch I get the following:

Code: Select allDependency is not satisfiable: libgstreamer0.10-0
Dependency is not satisfiable: libgstreamer-plugins-base0.10-0

seems like there's only libgstreamer1.0-0 available in stretch. In sid it's included though: [URL] ....

For the time being I installed the sid versions but wonder what's a proper solution.

View 2 Replies


ADVERTISEMENT

Debian Configuration :: Can't Install GNOME Or KDE In Stretch (dependency)

Jul 15, 2015

I'm trying to install KDE, but I can't. I've tried using tasksel, but it gave me an error, so I tried to install task-kde-desktop myself. When I did that, I ran into some dependency issues:

Code: Select allSome packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.

The following packages have unmet dependencies:

 task-kde-desktop : Depends: kde-standard but it is not going to be installed
                    Depends: kdm but it is not going to be installed
                    Recommends: kdeaccessibility but it is not going to be installed
                    Recommends: k3b but it is not going to be installed
         
[Code]...

View 5 Replies View Related

Ubuntu :: Error - Dependency Is Not Satisfiable

Sep 28, 2010

I'm trying to install a program, and am getting the following error:
Error: Dependency is not satisfiable: libswt-gtk-3.3-java|libswt3.2-gtk-java
How do I "satisfy" the dependency?

View 5 Replies View Related

Ubuntu :: Installing Gloobus - Dependency Not Satisfiable

Jan 7, 2010

I am trying to install gloobus, but when I open deb package it says Error: Dependency is not satisfiable.

View 1 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable: Libstdc++5

Feb 12, 2010

[URL].. when i try to install the .deb (cndrvcups-capt_1.90-1_i386.deb) i get Error: Dependency is not satisfiable: libstdc++5 i guess because we are now on ++6 how do i tell the install that, i looked in the control part of the .deb and can see where it is set but don't know how to change it and then build the .deb again (plus i don't know of that would work) or is there a way to fool the package into thinking ++5 is still installed?

View 2 Replies View Related

Ubuntu Installation :: Dependency Not Satisfiable When Try To Install.deb / What To Do?

Mar 6, 2010

If i try whatewer .deb file to install on ubuntu 8, or on ubuntu studio 9, i got this message- depedency is not..

View 9 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable: Python2.5

Jun 13, 2010

I try to install ultamatix on my ubuntu 10.04 system and i come up with the same error every time:

Error: Dependency is not satisfiable: python2.5

what do i do to successfully use ultamatix

View 2 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable Libqt4-xml

Sep 24, 2010

im using Ubuntu 8.04

Error: Dependency is not satisfiable libqt4-xml

View 2 Replies View Related

Ubuntu :: Software Manager - Dependency Not Satisfiable

Nov 18, 2010

I have 2 questions, First when I try installing some apps from the software manager I get :
Dependency is not satisfiable: libqt4-network (>= 4:4.5.3)

Secondly for some of the applications they require different sources (universe, main etc.) but when I try installing these sources it tells me to put in the maverick meerkat cd rom, I dl the virtual cd and I have the .iso can I use that for the source? Is there a virtual drive program I can use?

View 1 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable: Gconf2 (>= 2.28.1-2)

Dec 27, 2010

After a re-install, I tried adding Ubuntu-Tweak, only to have this message come up, in red, in the dialog box: Error: Dependency is not satisfiable: gconf2 (>= 2.28.1-2)

What does this mean, and how do you circumvent it? Edited to add: I tried installing it using the GDebi installer.

View 6 Replies View Related

Ubuntu Multimedia :: Error: Dependency Is Not Satisfiable

Apr 18, 2011

I would like to install wxCam in Ubuntu 10.04 and I have downloaded the file wxcam_1.0.7_i386.deb

Then I have installed with Synaptic Package Manager the following packages:

llbwxbase2.8-0
libwxbase2.8-dev
libwxgtk2.8-0
libwxgtk2.8-dev
libxvidcore4
libxvidcore-dev

Next step is double click on wxcam_1.0.7_i386.deb

And I obtained the following error: Error: Dependency is not satisfiable: libwxbase2.8-0 (>=2.8.11.0)

Synaptic Package Manager shows me that the latest version is 2.8.10.1-oubuntu1.2. So what means (>=2.8.11.0) ?

When I remove the packages �libwxbase�, then again I have the same error.

What is the right procedure to install wxCam?

View 4 Replies View Related

Ubuntu :: Installing Skype - Error: Dependency Not Satisfiable

Mar 18, 2010

When opening the Skype .deb with package installer, I get:Quote: Error: Dependency is not satisfiable: libqt4-dbus (>= 4.4.3) A quick repo search told me that it isn't in the repos.How can I install this?

View 3 Replies View Related

Ubuntu :: Installing Opera - Dependency Not Satisfiable Error

Mar 19, 2010

I've just installed ubuntu and wanted to give it a go. However trying to download and installing my favorite browser I get an error: Error: Dependency is not satisfiable: libqt3-mt (>= 3.3.4) im downloading the default package, and ran the package install thingy. I googled around trying to find a solution, but I found mostly for older versions of ubuntu and dont know if they apply to my problem. I also tried some tips I found running a command with something like sudo apt-get install libqt3-mt. then i end up with this response:
E: Couldn't find package libqt3-mt

View 1 Replies View Related

Ubuntu Installation :: Virtual Box Error - Dependency Not Satisfiable

Mar 28, 2010

I am very new to Ubuntu. I have installed Ubuntu 9.10 yesterday from downloading file from Website on my Acer Laptop. I want to install Virtual box and run Win XP to run some of the windows based programs. I downloaded deb file from virtualbox website for Ubuntu 9.10 and double clicked that file. The installer in Ubuntu immediately gave the following error.
Error: Dependency is not satisfiable: libqt4-network (>= 4.5.1)
I re-downloaded the file. But again same problem. I am not able to figure out what is wrong. I have got the latest update of Ubuntu running as I run the update after the the installation.

View 1 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable: Libqt4-network (>= 4.5.1)

Apr 5, 2010

I just downloaded Wally and was trying to install it but got this error

Code:
Error: Dependency is not satisfiable: libqt4-network (>= 4.5.1)

View 9 Replies View Related

Ubuntu Installation :: Skype Dependency Is Not Satisfiable Libasound2?

May 12, 2010

I am using Ubuntu Hardy. I tried to install Skype and it showed this error message "Skype dependency is not satisfiable libasound2". Then I check the synaptic manager it shows that the libasound2 is already installed. Then I reinstalled the libasound2 using terminal. But the error is still showing. On googleing I found in most of the forums the solution was to upgrade from edgy to feisty so it was no use to me.

View 1 Replies View Related

Debian Configuration :: How To Get Boot Log On Jessie / Stretch

Oct 14, 2015

When i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.

View 4 Replies View Related

Debian Configuration :: How To Enable DRI3 Over Stretch / Sid

Oct 19, 2015

How I can enable DRI3 over debian strech/sid

View 0 Replies View Related

Ubuntu Installation :: Installing Skype - Error - Dependency Is Not Satisfiable

Mar 1, 2010

I've just bought a new laptop (Acer 3810T - which has a "Core 2 Solo Processor) - so I have installed Linux for the first time in my life.... Ubuntu 9.10-desktop-amd64.iso - so far so good, I'm very very impressed and the operating system seems to be working fine. I assume that I have chosen correctly the AMD64 version then.

Fastforward to Skype installation, and I download the version (skype-ubuntu-intrepid_2.1.0.81-1_amd64.deb) - which is the best match as far as I can tell from Skype's website. However when I come to install it, I get the follwoing error: Error: Dependency is not satisfiable: lib32stdc++6 (>= 4.1.1-21)

View 5 Replies View Related

Ubuntu Installation :: Install Jikes-sun Package - Error: Dependency Is Not Satisfiable

Aug 3, 2010

I'm trying to run Processing with this instructions but when I try to install Jikes I get a dependencies error: HTML Code: Error: Dependency is not satisfiable: j2re1.3|j2sdk1.3|j2re1.4|sun-j2re1.4|sun-j2re1.5|sun-j2sdk1.5 I have Java6 jdk and Java6 jdr installed, what should I do????

View 2 Replies View Related

Debian Configuration :: Multipath Map Creation Takes Several Minutes In Stretch

Oct 14, 2015

After mapping iscsi storage from my netapp and scanning for new devices I run multipath -v2 to create the multipath device handle under /dev/mapping/. This normally takes about 2 seconds or less on every other linux distribution I use. On Stretch it takes a little over 3 minutes. I have tried several different versions of multipath.conf but the result is always the same.

My most recent multipath.conf file is available here : [URL] ....

and the output of multipath -v4 is available here : [URL] ....

View 0 Replies View Related

Debian Configuration :: Internet For Acer Extensa 5220 Laptop On Stretch

Jul 20, 2015

I have installed debian stretch on this machine, but can't get wired ethernet running. Using Slitaz live disc, the wired connection works. Guess I am missing a package or two.

Slitaz system (2.6.37) info reports:

Code: Select alltg3:  Broadcom Tigon3 ethernet driver
ath5k : Support for 5xxx series of Atheros 802.11 wireless LAN cards
ath:  Shared library for Atheros wireless LAN cards
mac80211:  IEEE 802.11 subsystem
cfg80211:  wireless configuration support
rfkill:  RF switch support

PCI device list:

Code: Select allEthernet controller:  Broadcom Corporation Netlink BCM5787M Gigabit Ethernet PCI Express
Ethernet controller:  Atheros Communications Inc. AR242x/AR542x Wireless Network Adaptor

Interfaces: lo, dummy0, eth0, wlan0

So it looks to me I need drivers for:

wired interface - Broadcom BCM5787M
wireless interface - Atheros Communications Inc. AR242x/AR542x

The debian scratch I have installed on the laptop gives me this info:

Code: Select alllspci -vvnn | grep -A 9 Network
04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
   Subsystem: Quanta Microsystems, Inc Device [1a32:0105]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-

[Code] ....

Output of lsmod:
Code: Select allModule                  Size  Used by
cpufreq_stats          12694  0
cpufreq_powersave      12422  0
binfmt_misc            12733  1
cpufreq_conservative    13872  0

[Code] ...

It looks like the required modules have been loaded, e.g. for wired, tg3

dmesg contains:
Code: Select all[    1.861173] PTP clock support registered
[    1.862488] tg3.c:v3.137 (May 11, 2014)
[    1.892663] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:15:e4:4d

[Code] ....

My etc/network/interfaces file is:
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

[Code] ....

And ifconfig yields:

Code: Select allifconfig
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:70 errors:0 dropped:0 overruns:0 frame:0
          TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:22264 (21.7 KiB)  TX bytes:22264 (21.7 KiB)

So no eth0. How can I fix this?

View 11 Replies View Related

Ubuntu Installation :: Canon Pixma Ip1500 Worked With Hardy 8.04 But Not With Karmic 9.10 - Dependency Is Not Satisfiable

Jun 11, 2010

I have replaced Ubuntu 8.04 with a clean install of 9.10 In 8.04 I used to be able to print to my Canon Pixma ip1500 using the resources at [URL] In 9.10 I can no longer get my Canon Pixma ip1500 printer to work because on the one hand: Open pstocanonbj_3.3-1.1_i386.deb with GDebi Package Installer

Code:

Error: Dependency is not satisfiable: libcupsys2-gnutls10 (>= 1.1.23-1) and on the other hand:

In http://packages.debian.org/etch/libcupsys2
download libcupsys2-gnutls10
"Download Page for libcupsys2_1.2.7-4+etch9_i386.deb on Intel x86 machines"
Open with GDebi

Code:

Error: Breaks exisiting package 'libcups2' conflict: libcupsys2 (< 1.3.7-6)

View 6 Replies View Related

Ubuntu Multimedia :: Amazon Mp3 Downloader Conflict - Error: Dependency Is Not Satisfiable: Libboost-filesystem1.34.1"

Jun 29, 2010

While trying to install the amazon mp3 downloader I got this package installer message : "Error: Dependency is not satisfiable: libboost-filesystem1.34.1" Amazons ubuntu version of this downloader is for the 9.04 version and not the10,04 LTS which I am using.

View 9 Replies View Related

Applications :: Cannot Update LMMS / Error Message : Error : Dependency Is Not Satisfiable?

Nov 5, 2009

I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?

View 5 Replies View Related

Ubuntu Installation :: Errors When Install Latest Tellico " Dependency Is Not Satisfiable"?

Jan 14, 2010

I downloaded the latest version of Tellico as a .deb file directly from the Tellico website,since the version available in the repositories no longer works with Amazon. This new version has been available at the web site since November,but has yet to be updated on the Ubuntu sites.Anyway,I tried to install it by double-clicking it in Nautilus. That brought up Package Manager which says that it cannot be installed - "Error: Dependency is not satisfiable". Is there anyway to force either Package Manager or aptitude ot dpkg to install the package along with any dependencies that are required?

View 2 Replies View Related

Ubuntu :: Error: Dependency Is Not Satisfiable: Libavutil49 (>= 3:0.svn20090303-1)|libavutil-extra-49 (>= 3:0.svn20090303-1)"?

Jan 17, 2011

have an error when I try downloading the Game Engine Panada3D in Gdebi Packaged Installer! There error is" Error: Dependency is not satisfiable: libavutil49 (>= 3:0.svn20090303-1)|libavutil-extra-49 (>= 3:0.svn20090303-1)"

View 1 Replies View Related

Debian Configuration :: Missing Dependency For Headers-2.6.29 On Lenny?

Jan 13, 2010

Here's my problem: I'm running a Lenny laptop and I need both wifi and virtualbox to work. I had to do a kernel upgrade to run the wifi. It works with either the 2.6.29 or 2.6.30 kernels, but with 2.6.30 I'm having screen brightness issues that I can't seem to get rid of. So I want to run 2.6.29, but virtualbox is a bit of a problem because it requires linux-headers-2.6.29, but when I try to install the amd64 headers it tells me that it cannot install the dependency linux-kbuild-2.6.29. Is there any way I can get that dependency installed on my computer?

View 14 Replies View Related

Debian Configuration :: Timeouts And Dependency Failures On Boot - Crypto Related

Mar 27, 2016

I've got this weird problem: when I reboot my Debian 8.3 server, I have to run through the crypto unlocking processes for my encrypted volumes a few times before I actually get to a login screen. The operation times out 85% of the time, leaving me to reboot and try over and over until the system is happy.

Here's my partitioning setup (manually partitioned at install):
/boot: 500 MB, EXT2, nodev, nosuid, noexec
/tmp: 2 GB, EXT2, AES-256/xts-plain64 with RANDOM KEY
swap: 2.5 GB, AES-256/xts-plain 64 with RANDOM KEY
/: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/var: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/home: 45 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE

Here's the output from journalctl -b -p 3:
Code: Select allDate and time | server name | systemd[1]: Timed out waiting for device dev-sda5.device
Date and time | server name | systemd[1]: Dependency failed for Cryptography Setup for sda5_crypt
Date and time | server name | systemd[1]: Dependency failed for Encrypted Volumes
Date and time | server name | systemd[1]: Dependency failed for dev-mapper-sda5_crypt.device
Date and time | server name | systemd[1]: Dependency failed for /tmp

[Code] ....

I had the same problem in previous builds where I chose Twofish instead of AES, and I was hoping that the timeouts would be fixed by switching to AES as my CPU has the AES instruction set. Obviously that didn't make a damn bit of difference.

What am I doing wrong, or what should I change in my setup? The encryption is a requirement. Could the problem be caused by something as stupid as using a RANDOM KEY instead of a PASSPHRASE on /tmp and swap?

Debian 8.3 as OS version.

View 1 Replies View Related

Debian :: Autoremove After Upgrade To Stretch

Jan 31, 2016

I recently upgraded my Debian box from Jessie to Stretch. After this, apt informed me that I should issue "apt-get autoremove," however the package list to be effected was large and contained some important packages (xorg being just one example). Most of the packages are qt4 related, and I at first assumed qt5 equivalents had replaced them, but seeing network-manager and xorg in the list made me pause.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved