I have a small ARM box with Debian on it, which I had practically forgot about for a long time. When I got around to actually re-configured it, and run 'apt-get update', here is what I got:[URL]I have tried just about everything I know of. I have installed all of the debian*-keyring, and 'apt-key list' returns:
/etc/apt/trusted.gpg
--------------------
pub 4096R/55BE302B 2009-01-27 [expired: 2012-12-31]
[code]....
I installed kubuntu a while back on an AMD64 3200 and hit some problems I can't solve: ran out of space on /boot & opera KEYEXPIRED.This is a multiboot machine. I have the /boot partition on an extended ext4 /dev/sda5 which is 50 MB size which was fine when I first set it up. It seems however that it is no longer sufficient for GRUB2:
Code:
$ sudo apt-get upgrade
...
[code]....
I have downloaded NETINSTALL disk from debian.org burned it and during installation it says that error and inst will not continued. This disk havent error replace disks and reburned them. On this computer debian 6 has been installed two weeks ago. "Running post-installation trigger fontconfig" on this stage i have fail.
View 6 Replies View RelatedI have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
I have a post in beginners section but maybe I can find some help here.. If you do not mind,please read the following post about my problem.viewtopic.php?f=30&t=55243&p=320093#p319848
View 1 Replies View RelatedI'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?
View 4 Replies View RelatedToday when I did apt-get dist-upgrade I encountered the following error:
apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
[Code]...
I recently tossed Ubuntu for Debian Unstable for my personal machines and I'm having trouble building Emerald into a package. I've already configured and installed the package (using the usual ./configure, make, make install) but I wanted to make a deb for future use (for myself and for others). However every time I try to run dpkg-build I get the following error message.
dh_install -pemerald --sourcedir=debian/tmp
dh_install: emerald missing files (usr/bin/*), aborting
make: *** [binary-install/emerald] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
[Code]...
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
View 1 Replies View RelatedI have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View RelatedI need to install some package on a very old box with Debian Etch.
When I type: apt-get update
I get several error:
Quote:
Where can I find a valid etch repository?
After installing Debian Testing from the business card ISO via unetbootin, without a DE or WM, I log into root and get an error. The error is INIT: ID "co" respawning too fast: disabled for 5 minutes. I see the "co" line in /etc/inittab but I don't know what to do. How do I fix this error?
View 6 Replies View RelatedI'm attempting to apply the quota patch to postfix 2.5.1. I have done the following..
Code:
cd /usr/src/
apt-get source postfix
wget http://vda.sourceforge.net/VDA/postf...da-ng.patch.gz{code]....
dpkg-buildpackage: failure: tail of debian/changelog gave error exit status 1
I have searched hi and low and still can't work out how to resolve this.
I wanted to install tor+privoxy on this new install of lenny on my pc. On the previous system, it worked fine and installed correctly.
But on this one I get this output:
Code:
The following NEW packages will be installed:
I have Debian Stable Lenny. Also I tried using the testing repository before but the same came up .
I have a very strange problem; when trying to apt-get update or aptitude update I get time out errors. At first it was resolving ipv6 adresses:
Cannot initiate the connection to ftp.litnet.lt:80 (2001:778::87). - connect (101: Network is unreachable) [IP: 2001:778::87 80] Err [URL] Cannot initiate the connection to security.debian.org:80 (2001:a78:5:1:216:35ff:fe7f:6ceb). - connect (101: Network is
unreachable) [IP: 2001:a78:5:1:216:35ff:fe7f:6ceb 80] As my host does not have normal ipv6 support, i just tried to disable ipv6: echo net.ipv6.conf.all.disable_ipv6=1 > /etc/sysctl.d/disableipv6.conf
[Code]....
I am encountering the following error during installation of NIS on Debian 8
Code: Select alldpkg: error processing package nis (--configure):
subprocess installed post-installation script returned error exit status 1
Code: Select allroot@periferralvm1:~# apt-get install portmap nis
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'rpcbind' instead of 'portmap'
rpcbind is already the newest version.
[Code] ...
Tried:
Purging and reinstalling
reinstalling dpkg
rebooted server
touch /etc/init.d/nis and reinstall nis
After upgrading to Squeeze, which comes with kernel 2.6.32, my system encountered DRM error and booted up with a blank screen. This happened intermittently. Searches on the Web did not give a definite answer. It seemed there was a bug in the kernel and this was cleared since 2.6.31 but I am using 2.6.32.
View 3 Replies View RelatedWhen I try to compile it get there errors: [URL].... compiling with: gcc -v execv.c -o hola I already installed build-essential, what could be happening with my gcc compiler? this is my code, as you can see it's not complex
[code]....
Last weekend, i upgraded debian from 6.0.1 to 6.0.2, i notice that apt was upgraded, but the gpg keys remained unchanged.However, after i upgrade, when i do "aptitude update" i get errors such as
[... usual hit and other stuff ...]
W: GPG error: http://mirror.nus.edu.sg squeeze Release: The following signatures were invalid: BADSIG AED4B06F473041FA Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>
[code]....
I don't know if I can post this question in this forum but let's see. I'm trying to install an application (apollon if needed) and while I was running the file to create (compile) the installer, I got an error that qmake wasn't found, so I installed it from the debian packages. Now when running the installer, I get this error message:Error: An error occured running qmake. Check the log for more information.
This is the log's details: Compiling arkollon QMAKESPEC has not been set, so configuration cannot be deduced. Error processing project file: /tmp/selfgz3433/arkollon-0.4/arkollon.pro
So my the answer to this problem is setting QMAKESPEC environmental variable, I guess. But where should it redirect?
I'm trying to install g++ on debian Squeeze version 2.6.32 but I get this error:
The following packages have unmet dependencies:
This is my sources.list:
It seems that I have broken packages, but my souces.list should be fine.
Im having problem compiling kernel I used these commands
#make menuconfig
#make-kpkg clean
#fakeroot make-kpkg --revision=custom.1.0 kernel_image
[code]...
I am trying to install medit URL... a tool for mesh visualization. When I execute the makefile, I get the error
Code: Select allcc -o medit-2.3-linuxCC -s -static-libgcc ./objects/*.o /usr/lib/x86_64-linux-gnu/libglut.a /usr/lib/x86_64-linux-gnu/libGL.so /usr/lib/x86_64-linux-gnu/libGLU.so -L/usr/X11R6/lib -lXmu -lXext -lX11 -lm
/usr/bin/ld: /usr/lib/x86_64-linux-gnu/libglut.a(libglut_la-freeglut_gamemode.o): undefined reference to symbol 'XF86VidModeGetViewPort'
//usr/lib/x86_64-linux-gnu/libXxf86vm.so.1: error adding symbols: DSO missing from command line
I tried searching for "undefined reference to symbol 'XF86VidModeGetViewPort'", and it seems to be related to glut. I installed freeglut3 and freeglut3-dev from synaptic.
I have the following system:
HARDWARE, desktop: MSI motherboard A58M-E33
AMD (APU A6-5400k) (dual-core) (AMD Radeon HD 7540D) (3.6Ghz),,,,4GB/RAM
Monitor connected to the motherboard's VGA port.
DEBIAN JESSIE , Linux 3.16.0-4-686-pae
========================================================
The computer continues to run fine no problems, I only see the following fail error at boot up...
kernel: [46717.717430] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 ........
kernel: [46717.717430] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 ..............
the above repeats about 18 or so times. then:::::
[Code] ....
The computer continues to boot, and runs well. I did a search, and I found similar errors reported but NOT the same as this. They were blamed on issues between Linux3.16 and AMD type GPUs ...
I try tou Mount NTFS partition, and i i have this error massage:
"Cannot mount volume. Invalid Mount option when attempting to mount the volume"
I installed squeeze with 2 drives, one for squeeze (2.6.32-3-amd64 using 120GB hdd), and one for my old winxp. I used LVM with ext4 on /root, /home, and ext2 for /boot. The install gave me grub 1.98.
When booted, screen says
Loading Grub
Welcome to Grub
I installed GRUB 2 for someone, and I made a mistake, and did not specify the right place (/dev/sda3 for me) when it asked. Now I can't do anything. I can't boot GRUB, can't do nothing.
View 1 Replies View RelatedI'm trying to install mysql on Lenny. I managed to get apache and php going just fine but i'm getting this error for mysql at the mo: The following packages have unmet dependencies.
mysql-client: Depends: mysql-client-5.1 but it is not going to be installed
mysql-server: Depends: mysql-server-5.1 but it is not going to be installed
E: Broken packages
I don'thave a cluse how to fix this. I've read that adding a line in sources.
I have been getting a Hash Sum mismatch error on certain packages since Debian Squeeze became stable,
[Code]...
E: Some index files failed to download. They have been ignored, or old ones used instead.