I'm attempting to apply the quota patch to postfix 2.5.1. I have done the following..
Code:
cd /usr/src/
apt-get source postfix
wget http://vda.sourceforge.net/VDA/postf...da-ng.patch.gz{code]....
dpkg-buildpackage: failure: tail of debian/changelog gave error exit status 1
I have searched hi and low and still can't work out how to resolve this.
I'm trying to build Qt using dpkg-buildpackage. Briefly, the problem I have consists in that using dpkg-buildpackage I get a linking error, that I don't get if I run configure and make directly, without the mediation of dpkg-buildpackage. One of the issues that we have is that, using dpkg-buildpackage, the configure command is not capable of finding the .qmake.cache file, so, the environment variables set in the configure script and saved in that file are not read, which causes that the apropiate linking parameters are not used. I guess that the problem is caused by a difference in the environment of execution of the configure command. I don't know in which way the dpkg-buildpackage is changing the environment so that it makes fail the building process.
I run 'make deb-x11' to start building process using dpkg-buildpackage: This is the main Makefile:
X11_DEB = gvr-qt-x11-lgpl_$(X11_VERSION)_i386.deb
...
BUILDPACKAGE_ARGS = -b
BUILDPACKAGE_ARGS += -rfakeroot
BUILDPACKAGE_ARGS += -uc
[Code].....
I have tried to create a deb package, but It failed because I was missing some dependencies Now I have installed the dependenci and want to recreate the package (or try to), but get the following error.
rm -f sites-enabled/inner-tunnel sites-enabled/default
rmdir: failed to remove `sites-enabled': No such file or directory
make[3]: *** [clean] Error 1
make[3]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg/raddb'
make[2]: *** [common] Error 2
make[2]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make[1]: *** [clean] Error 2
make[1]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make: *** [clean] Error 2
How do I fix this, without starting from scratch ?
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
Sid
cmake 2.8.1-2
dh-make .54
dpkg-dev 1.15.7.1
I'm having some issues building deb packages. dh_make --createorig behaves as expected, but when I attempt to buld the package with dpkg-buildpackage -rfakeroot the build dies on a dpkg-source error.
When I tried to upgrade my xubuntu 10.04 , I got this error
dpkg: parse error, in file '/var/lib/dpkg/available' near line 2 package 'x11proto-core-dev': value for `status' field not allowed in this context E: Sub-process /usr/bin/dpkg returned an error code (2)
im trying to update some software in ubuntu using the update manager. i type my password in CORRECTLY but then get this error message.
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
what does it mean and how do i fix it?
I keep getting this error when I try to install Adobe flash player E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. I had it installed just fine, then i restarted my computer and its gone. .
View 4 Replies View RelatedI'm using 10.10 and from today I'm getting this error Quote:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. When I'm trying to install any software using
Code: sudo apt-get <sw-name> Also I'm unable install using "Ubuntu Software Center", showing unhandleable error. Here is the details:
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 769, in simulate
return self._simulate_helper(trans, status_path)
[Code]...
I want to install gcc on my Pyramid linux which is debian based. I downloaded gcc.deb. When I want to install this file, it gives me "dpkg command not found" error! I also get this error when I want to install other .deb files using dpkg command " dpkg -i finename.deb. I did some research and it seams that I should install package on my system, but package file is .deb file and I can't install .deb file! What should I do to solve the problem??? Should I install any thing on my system to install .deb files??
View 3 Replies View Relatedduring an "apt-get install" the filesystem of a virtual machine filled up and so it failed. I have now increased the file-system size but running the same "apt-get install" again results in this error: "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem." However when I try to run 'sudo dpkg --configure -a' I get this error: "dpkg: failed to write status database record about 'libxmuu1' to '/var/lob/dpkg/status': No space left on device" How can I recover from this situation?
View 1 Replies View RelatedAfter I got the OS up and running (v9.10), I was prompted to download and install some updates. The download is complete, but when I try to install the updates, I receive the following message. What should I do?
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
I installed the software Ubuntu Tweak yesterday and I was satisfied of how it worked. today, surfing the internet I was hoping to find a solution to a couple of problems that I have: the computer sometimes get stuck when opening videos or photos - I can't see streaming TV. when the internet browser was asking me to install plug-in in order to show the videos I tried to install them but errors occurred.
so I followed the instruction in [URL] (many of these things didn't work and the terminal was showing error messages...) now after rebooting I have got the unity 2D I think (which is fine as I can't notice great differences) but I can't install the updates from Ubuntu Tweak the error message is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. how can I fix it and get my video codecds?
I'm trying to update Kubuntu 11.04 here is my error: p, li {white-space: pre-wrap;} E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. here is what i have tried to fix it:
[Code]....
I have a little home server running server 8.04 and decided to check for upgrades. One of the upgrades was a new kernal update. It was able to download the update, but errors on uncompressing it. I have even shutdown the server and restarted it. Still no luck.
Here is the screen log from the update process:
(Reading database ... 49993 files and directories currently installed.)
Preparing to replace linux-image-2.6.24-28-server 2.6.24-28.80 (using .../linux- image-2.6.24-28-server_2.6.24-28.81_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.24-28-server ...
[code]....
When trying to install php5 I got the following result. Tried to apt-get clean, autoclean, remove --purge then reinstall the mentioned packages without any success.
dpkg --configure -a didn't get any better result.
Code: Select allsudo apt-get install php5
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
libapache2-mod-php5 php5-cli php5-common
[Code] .....
I am downgrading one of my Sid boxes to Testing. I've finished the install and now duplicating the system for installed packages.
Before I started, to get a list of installed packages
Code: Select allsudo dpkg --get-selections > package.txt
Now when I try to duplicate the installed packages
Code: Select all sudo dpkg --set-selections < package.txt
I receive over 1000 lines with the message:
Code: Select alldpkg: warning: package not in database at line wxyz
I did try
Code: Select all dpkg --configure -a
without any effect.
Is this just a diffence between the Sid package database and the Testing database?
I was triyng to install Debian on a AMD K6-2. I use debootstrap, and installed Lenny, with a kernel linux-image-2.6.26-2-486.
After that apt-get update and apt-get upgrade and I get:
The following packages will be upgraded:
Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel.
Please upgrade your kernel before or while upgrading udev.
AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you 0understand what you are doing!
And similar messages appears trying to install xfce4...
I ran into this:[url]
I tried to ignore it (yesterday it made me remove xmms2-plugin-all, i could have lived with that for a few days), but it is getting worse: gnomebaker, mpg123, vorbis-tools, cdrdao, etc.
So i remove beloved apps , run aptitude install -f and what not. The result is that either libao2 or libao4 give me trouble (depending which version is installed at that moment).
After the upgrades are available again it's big fun over here. Is it just me or are others running in a lot of "dpkg returned an error message" too? The first time ever i got to use aptitude to get problems solved. Gnome terminal gives me segmentation fault but no error messages. And so on.
I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
I have a post in beginners section but maybe I can find some help here.. If you do not mind,please read the following post about my problem.viewtopic.php?f=30&t=55243&p=320093#p319848
View 1 Replies View RelatedI am using ubuntu server 10.10. Tried to create a cronjob for logwatch/sendmail, but without sucess.
I followed the instructions : URL
When I type :
Quote:
sudo grep CRON /var/log/syslog
I get the result :
CRON[27611]: (CRON) error (grandchild #27612 failed with exit status 127)
I just wanted to post this in the forums for anyone else that was having the same issue. I looked all over the internet for 4 hours and could not find a solution and finally figured out what to do. Maybe this will help save some time for someone else.
The ERROR:
Removing nvidia-glx ...
dpkg-divert: error checking `/usr/X11R6/lib/modules/extensions/libglx.a': No such file or directory
[code]....
Today when I did apt-get dist-upgrade I encountered the following error:
apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
[Code]...
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedI can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
When I try to upgrade, I always get this message: "E: /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-35_i386.deb: failed in write on buffer copy for backend dpkg-deb during `./lib/modules/2.6.32-5-amd64/kernel/drivers/net/s2io.ko'"
View 14 Replies View RelatedI was having some problems with PlayOnLinux and decided to uninstall it.
I went to Software Center and tried to uninstall it there, no luck.
It just said: Package operation failed. The installation or removal of a software package failed.
So then I tried in Terminal: entering "sudo apt-get remove playonlinux" and I got this reply:
Quote:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
I then tried to enter: "sudo dpkg --configure -a" and got this:
Quote:
dpkg:
Ubuntu 11.04 (64x) installed from WUBI.
Hardware (I don't know if this is relevant): Intel i5 M 450 ATI Mobility HD 5650 Others?
Im experiencing issues updating. here is the error update is giving me:Reading database....60%dpkg: unrecoverable fatal error, aborting:files list file for package 'liborbit2' is missing final newlineE: Sub-process /usr/bin/dpkg returned an error code (2)A package failed to install. Trying to recoverNothing happens at this point.
View 4 Replies View Related
