I'm trying to install g++ on debian Squeeze version 2.6.32 but I get this error:
The following packages have unmet dependencies:
This is my sources.list:
It seems that I have broken packages, but my souces.list should be fine.
I'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?
View 4 Replies View RelatedI'm trying to install mysql on Lenny. I managed to get apache and php going just fine but i'm getting this error for mysql at the mo: The following packages have unmet dependencies.
mysql-client: Depends: mysql-client-5.1 but it is not going to be installed
mysql-server: Depends: mysql-server-5.1 but it is not going to be installed
E: Broken packages
I don'thave a cluse how to fix this. I've read that adding a line in sources.
I tried to install screen today using apt-get and I got the following error. I get the same error if I try install anything with Apt-get.
root@KITSrv01:/etc/bacula# apt-get install screen
Reading package lists... Done
Building dependency tree
[code]....
I have Debian 8.2 stable with kde, when I try install a new package *.deb with APPER, i have this error:
"MIME type 'application/vnd.debian.binary-package' not supported"
And i can't install any package; however if i use terminal with command dpkg -i, I can install packages.
So I can't install any software.
How do I amend this error?
During installation of ssh I get an error message regarding dependency problems.
Dependency problems prevent configuring of ssh.
I do install Komodo Edit to my debian lenny: I do start run ./install.sh terminal show message: ./install.sh: line 48: ./INSTALLDIR/lib/python/bin/python: don't run binaries file.
What I do for fix it?
Lately I have noticed when I am trying to install something I have been getting 'Hash Sum mismatch'
Here is an example when I tried to install Calibre:
root@V-debian:/etc/apt# apt install calibre
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
i am a beginner of debian, and i used ubuntu previously, now i have a problem installing Chinese input fcitx, i did exactly the same as the manual said( i tried ./configure -prefix=<usr/local>, but didn't succeed. so i use ./configure directly) , and here is the website[URL].. but i just can't successfully install it, no matter whether i extract the file in terminal or in nautilus, and here is the file i downloaded from[URL].. below is my terminal output
[Code]...
by the way, i am now using stable version,but i want to use the newest version of chromium, because the old version doesn't fully support my chrolium data stored in ubuntu. how can do that easily? i searched the internet and find it was a little difficult.
I was triyng to install Debian on a AMD K6-2. I use debootstrap, and installed Lenny, with a kernel linux-image-2.6.26-2-486.
After that apt-get update and apt-get upgrade and I get:
The following packages will be upgraded:
Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel.
Please upgrade your kernel before or while upgrading udev.
AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you 0understand what you are doing!
And similar messages appears trying to install xfce4...
I have a debian-504-i386-CD-1.iso installation CD and trying to install on a new Gigabyte M68M-S2P motherboard with 2GB ram on a new 80GB IDE hard drive.
I am choosing the Graphical Install and after about one minute I see a message:
Not using MMCONFIG
BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
Then after a few seconds another message: Trying to enable the frame buffer Then it just seems to hang the system
I have the latest BIOS installed for the motherboard and tried loading the BIOS fail safe settings and also the optimized settings.
I am trying to install Debian over Kali since in order to use steam, newest version of wine and a few other things causes a change reaction that would require about two-thirds of my main os re-written with non kali files which makes me a little uneasy.
I have downloaded the debian-live-7.8.0-i386-gnome-desktop.iso from torrent from the link from debian download listings at debian.org. and I put it on a 8gb flash drive formated with gparted to a bootable fat32 partition and is listed as being /dev/sdc I installed the iso to the drive uss dd using the following code
Code: Select allsudo dd if=debian-live-7.8.0-i386-gnome-desktop.iso of=/dev/sdc bs=4M; sync
now it boots to the flash drive just fine with only the gnome3 drivers loaded by the live os isn't fully functional with my system. Ie. when I log into any of the live modes it gives me a message that it was switched to gnome3 [fallback] I am using the current version of gnome3 desktop manager installed from source on kali with out any trouble.
Also when I click the graphical installer or the installer modes from the grub i get a background image with some sort of artifiacts in the top inchish of the screen then everything but the mouse freezes. But when I go into one of the live modes and click the installer in their it opens just fine but when it starts transferring files it says that it couldn't transfer files from the cd after all the language and localization screens at the beginning.
I did find a misc page on the internet involving a cruchbang with the same problem [URL] I went to the folder in the usb drive in question and it looks like since that was originally post something has changed or it could have been a crunchbang format.
So basically I am asking did I do a step wrong should I try a different way of instillation, or do I have a corrupted image? also I am unable to use disk media due to the type of drives and disks I have access to.
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
I have tried both DVD and CD (both are MD5-checked) of both Lenny 5.0.8 and Squeeze RC on my HP DV7-3074CA. (a.k.a 3085DX)When I choose a graphic install, it just hangs after loading the initial files.When I choose the normal install, It gives the following error:
[1.383207] ACPI: EC: Input buffer is not empty, aborting transaction.
Is there a boot command I can input to override this? I tried removing the battery slot, but the only difference is that that message does not appear, but the setup hangs anyway.
UPDATING:Tried "pci=noacpi" but that did lead to a kernel panic.[1.547564] Kernel panic - not syncing: Attempted to kill init!
So I just recently got an HP pro 1005 all in one PC and tried to install Debian 8.2 on it through a bootable Uefi USB, however, when trying to install, there's always an error like this: "The attempt to mount a file system with type ext4 in LVM VG debian-vg, LV root at /failed."
Also, no matter how many times I completely wipe every partition, there's always this message at the start of the installation saying Windows is already installed as BIOS compatibility mode, and asks me if i still want to install as Uefi, I was wondering if that had anything to do with my error.
I checked the drives health and there wasn't any kind of problems, passed all the tests.
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies View RelatedI am currently trying out Debian in VMware Player and I installed it using the following method.
Image Used: Debian-7.6.0-amd64-netinst
In the check list where it lets you select Debian Desktop, Print Server, and System Utilities I think it was? I deselected everything.
After Debian installed and rebooted I logged in, elevated myself to su, and entered the following commands.
apt-get update
apt-get install kdm kde-plasma-desktop --no-install-recommends
reboot
startkde
and I get the error '$DISPLAY is not set or cannot connect to the X server.'
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
Ive just installed Debian Lenny and then fglrx and kde, but if i try to login to kde, i get an error message because of invalid user. Do I have to enable my user first to login to kde or something?
View 4 Replies View RelatedI'm trying to install easystroke to my debian lenny tablet pc, but compiling errores:
Am I missing some X components? I have installed needed depedencies; g++ libboost-serialization-dev libgtkmm-2.4-dev libxtst-dev libdbus-glib-1-dev intltool
Other mouse gesture program gestikk download site is down.. so there is only easystroke - or is there other mouse gesture programs available?
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
The message above occurred with GEdit running in background and while attempting to use yahoo mail in Iceweasel. System froze and I rebooted.
While Iceweasel has been the browser used the most since installing the system and has been the program in use during the freezes, Epiphany was also tested and was far less functional, with rendering failures occurring with nearly each modification of a page, though not all fatal. With Epiphany, re-rendering and reloading of a page was only accomplished by using my mouse wheel, other input methods left a gray, unusable screen.
My installation was complicated by the following factors and goals: dual-boot capability with the idea of loading another linux flavor such as Ubuntu onto a partition. retain 2 "legacy" ReiserFS data partitions used under Debian Etch. use 1 ReiserFS partition as /home
What suggestions do you all have on stopping these system freezes and errors?
Other possibly useful factors:
I chose "Expert" (graphical) install as it seemed the only way to enable dual-boot capability.
I loaded the ReiserFS compatibility modules during the system install.
I chose the "highlighted" kernel during the install out of 4 choices. The kernel I chose is Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011 - however I cannot rule out the possibility that one of the other 3 kernels wouldn't have worked better.
I chose to enable the version of the system that had the most options for hardware compatibility instead of a more limited, smaller system customized to my hardware.
The default system settings for inactivity would log me off, as ppropriate. Because of a pattern of problems awakening from sleep mode, on 5/13 3am I changed the log off setting to never to avoid errors when the system should awaken. But still yet another freeze at on 5/13 at 22:49 while multiple windows were open.
I have downloaded NETINSTALL disk from debian.org burned it and during installation it says that error and inst will not continued. This disk havent error replace disks and reburned them. On this computer debian 6 has been installed two weeks ago. "Running post-installation trigger fontconfig" on this stage i have fail.
View 6 Replies View RelatedThe strangest thing happened. I installed Debian testing with the "squeeze Alpha1" netinstall cd. All seemed to go well and the installer made me pick a root password and create a normal user account. However, after the first boot my user account did not work and I could also not login as root, it looked liked I forgot the passwords for both accounts. When rebooted in recovery mode, I got Code: sulogin: root account is locked and I was automatically logged in as root without being asked for a password. Then I found out that the normal user account does not exist. I created a user acount and logged into it. I did passwd to set a password, but I got Code: passwd: Authentication token manipulation error Also, there was no home directory for the new user.
View 6 Replies View RelatedI have tried: 1. zcat boot.img.gz > /dev/sde and copy the image file debian-testing-amd64-netinst.iso to the usb-stick. 2. and manual whit syslinux /dev/sde1And also various builds of testing and it can't load the image file. always i get the error message "Filed to copy file from cd-rom"And i cant ether install 6,01 Before the image debian stable 6,0 worked and several testing builds before the stable release 6.0.The boot process work flawless but installer can not find the iso according to error msgI have verified the iso file with md5sum and made sure to write out to de stick whit sync.And haven't changed my bios boot that worked before.
View 4 Replies View Relatedmy error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.