i have a probelm once i leave my laptop there for a while the monitor turned off and there is no way for me to turn it back on, so i need to restart the machine.
View 3 RepliesI am having this weird problem when I turn off my PC and then when its turned back on there are items on the desktop that were not there before (they had been previously but been moved to another folder).Also partitions that I dont want to mount are suddenly mounted and I have to umount as root. I think I have some problems in my grub2 installation since installing 10.10. I ran the boot info script, and can see that there are problems but I get nervous messing with grub
View 7 Replies View RelatedI have this issue with two different computers. One is a dell optiplex gx60 and the other a hp pavilion a317x. The two monitors are a hp pavilion f70 and a nec mulitsync lcd.
The problem I have is the monitor will randomly turn off like it would if the signal is lost but the computer is still running. I cannot get the monitor back on unless I do a hard shutdown and reboot. Sometimes it will happen within minutes of turning on the computer and sometimes it will take hours or days. I have had this problem with ubuntu 10.04 which is currently installed, mint 9 xfce, and mint 9 fluxbox. The only distro that it did not do this on was peppermint ice and windows xp.
I don't know at this point if it is hardware or software related. I am new to linux so I don't know what else to look for.
I am running on ubuntu 10.04 and using the latest nvidia driver. What I experience is a random black screen, my monitor goes dead and won't turn back on till I hardboot. I had this issue on windows and solved it by downloading rivatuner and telling it to force my 9700m into staying in 3d performance mode at all times. I know it has nothing to do with temps or anything like that. All I need to know is how I can duplicate what I did with rivatuner on windows
View 1 Replies View RelatedDebian, Squeeze, Gnome. Laptop AJP7521P. I had it on for a few daysThen i decided to close the lid (hibernate). When i turned it back on, it did not load. It has a black screen with GRUB written on the top left. I think that grub does not load.My /(root) partition is sda4.Would update grub fix it? (I am worried whether it will find sda4).
View 10 Replies View RelatedFairly new to debian and linux and general. I have an install of debian wheezy (to run LinuxCNC). I went in the graphical interface to the 'monitor' section and changed the screen resolution. I had two monitors, one labeled monitor and another (I think) Lenovo Monitor.
There was a check box in the screen monitor window that said something like, "Don't use this display." I figured it might turn off the lenovo and default to the generic monitor listed. I clicked it and my monitor turned OFF!! I tried another monitor (Dell in this case) and same thing, no video output.
I asked on the LinuxCNC forum and googled, but I just dont' seem to be able to figure out what or how to get to the solution.
I have been able to Ctrl-Alt-F1 to open a terminal. But, I can't find any the right files and found that the xrandr command 'should' work, but doesn't.
Whenever I issued the xrandr command (other than man xrandr), I get "Can't Open Display"
I did find two outputs VGA1 and LVDS1 in this file /var/log/Xorg.0.log and this coincides with what I saw in the monitor window. These are the 'output' types and if the xrandr command worked I'd issue something like : xrandr --ouptut LVDS1 --auto
I read about xorg.conf, but I could not find any xorg.conf files in the etc/X11 folder. In some of the info I found, the xorg.conf was replaced in this or a recent version of Debian by something else and confuses me.
One person had a similar issue and he got to this directory: $HOME/.e/e/config/standard" and found files such as:
"e_randr.cfg" plus "e_randr.1.cfg" thru "e_randr.9.cfg"
But, I can't get to that folder. How to turn on my monitor display?
When i turn on my monitor the screen goes blank, but the 'on' button is lit up. Any ideas of what the problem could be?edit: When i turn off and turn on my monitor, it displays what's on my computer for a couple of second and than the monitor turns off again.
View 7 Replies View RelatedI have fedora 10 installed and when my monitor is turned off the X session fails to start because it can not probe for settings. Is there a way to hard code the settings for x instead of letting them assign dynamically on boot?
View 1 Replies View RelatedI'm trying to boot off of the Fedora 13 ISO disc... After the splash screen my monitor kicks into stand-by and never comes back on..
It doesn't happen when I boot off the hard drive into Windows Vista
It doesn't happen with my Back Track 3.0 Live disc either.
I tried switching from my video card to onboard video in cmos, but no good.
I tried removing the video card and plugging directly into the onboard video, but no good.
I tried starting with only one ram module at a time, no good.
I tried removing all other peripherals, no good.
I actually tried using another monitor too, but no good.
I tried booting the disc from a different drive as well, same thing.. code...
I have an Asus Eee PC with Ubuntu Netbook Remix (Unity). The other day, I turned off the wireless using the keyboard shortcut to save battery life when I was somewhere without wireless, but now it's not turning back on. I tried restarting, I've done the keyboard shortcut several times, and it still just says "disconnected" for wireless and wired, even though there are several wireless networks around me right now. There aren't any options in Network Connections or Network Tools to turn on the wireless. Is there a way to manually turn it back on?
View 2 Replies View RelatedAlthough I'm a linux user, I don't know much about the whole booting process myself. I normally have a friend that I can consult when things don't go the way I expected. But here's the thing: he updated my computer and went away. And of course I can't reach him and I really need it to work. And moreover, I want to be able to sole things myself.
The booting process stops halfway. The last thing it says is: can't access tty: job control turned off (initramfs) ...
This is the difference in the output of a port scan using Zenmap on the same system with UFW turned off and then with it turned on. It is obvious that UFW works.
View 6 Replies View RelatedThe wireless connection works fine. The wireless switch automatically turns itself on every time I start the computer. However, after turning it off, I can't ever turn it on again unless I restart the computer. And because of this, the wireless connection is disabled until the next time I start the computer.I don't think this is a hardware problem because the switch can be turned on and off, although not in the way I expect.
I'm using ubuntu 9.10 on an Acer Aspire 4740G. The command [lspci | grep Network] shows Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01). the [rfkill list] command shows (when the switch is on)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
and, as expected, shows (when the switch is turned off)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
I just want to be able to turn the switch on or off at any time I want as long as the computer is still on.
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
I accidentally turned off hotkeys (so now print screen button won't work) so I turned the service back on (in "configure desktop") by hitting "start" but the "print screen" button still won't work.
View 9 Replies View Related"/bin/sh: can't access tty : job control turned off(initramfs)"This comes when I boot.Hi, I tried to netinstall Debian testing on my brother's computer and only selected the "Standard system". I think it installed Grub 2.The Grub boot menu is also not showing the Windows 7.Also, I have this new terminal as (initramfs) and do not know what to do. I am stuck with (initramfs) which I have no clue about.
View 7 Replies View RelatedI put xubuntu on a live usb but want to remove xubuntu so I have the full flash drive to save on. Is this possible??
View 2 Replies View RelatedOpenSuSE 11.3 Radeon graphics
How do you set it so the monitor does not turn off. I want to run a slideshow as the screensaver.
My asus 17" lcd VB171/VB191 monitor has started continuous beeping. Detaching the cable for sound from the computer, the beep stops, but it starts again by plugging the cable in. The motherboard is Tyan S2895 K8WE. The monitor has worked normally for one year.
View 10 Replies View RelatedCould someone please tell me how to turn my password settings back on for mintupdate? Somehow it got turned off. I don't like how software can be updated without my password now.
View 9 Replies View RelatedIs it at all possible to have the monitor turn on when I boot my computer?
View 1 Replies View Relatedhow to turn off your laptop screen in Ubuntu using a script/command, but none seem to have worked for me except one.
after digging around, I found the following suggestions:
1. xset dpms force off or xset dpms force suspend
This didn't work for many people, nor did it work for me, as the monitor would just turn on again after a few seconds. The second other suggestion I found to make this "stick was:
2. sleep 1; xset dpms force off
or sleep 1; xset dpms force suspend
This worked for some people, by delaying the monitor off function by one second, but it did not work for me, as the monitor would turn on again by itself after one minute exactly. Maybe those who thought this was the solution just walked away and never really found out their monitor plays sneak-peak with them. The next solution i found digging around was supposed to really make the monitor stay powered off:
3. sleep 1; && xset dpms force off
or sleep 1; && xset dpms force suspend
But this didn't work either; what a disappointment, and it also made my CPU and HDD freak out for a while while my monitor was off. So after some more digging around, I came up with the following: (and I don't remember where i got this, whether it was from here or elsewhere on the internet, but if it is your creation, please contact me and I'll edit the post to give you credit)
4. create a file and save as something like Monitor_off.sh in a folder of your preference with the following in it:
---------------------------------------
#!/usr/bin/python
import time
import subprocess
from Xlib import X
[Code]....
Then just go to: System>Preferences>Keyboard Shortcuts and assign a Keyboard combination shortcut to call and initiate the script. I chose "<Ctrl>+M" because it's easy to remember.
Make sure to disable any same keyboard shortcuts you may have in Compiz to avoid conflicts.
This final script just worked perfectly for me. And the Monitor just stays off until I shake the mouse or press a key on the keyboard, and my CPU and HDD don't rev up like a Harley. This final solution seems to be working for everyone of my friends without a glitch.
I have been dual booting my XP and Ubuntu for a while now. However, my pc monitor does not turn on until I am booted into windows/linux. This means I have to 'guess' to a certain extent which OS to select on boot (using GRUB). I expect I will have to change a setting in the BIOS but I am not too sure what to look out for.
After turning on my pc I have to restart it for it too do anything, it appears to just hang!However as I cannot see what is happening due to the monitor problem I am completely in the dark as to why it would do this/what is going on! I have XP installed at the front of my hard drive and Ubuntu at the back. It worked ok the first time I tried it after install (still had the monitor problem but was able to guess) then after that this random problem!
i currently use Slackware 13.1 64 bit. when i want to get back to console after use "startx" command, my monitor suddenly off and would not turn on until i restart my computer. so i could never get back to console when i've started x window.i use ATI HIS HD 5670.
View 1 Replies View RelatedI have XFX ATI-HD5670 and use proprietary catalyst 11.2-1 in 64-bit Fedora 14.
I am not sure when this started, or if it ever did work before, but when I started noticing that the screensaver will not turn off the monitor, I set the gnome power manager to make the monitor sleep after an hour.
Now, the display will not turn back on after it has been in sleep mode. I know the system is still running fine as I can ssh from another PC and see that everything seems to be normal, no error message in dmesg, /var/log/Xorg.0.log, etc.
/var/log/Xorg.0.log shows that monitor DPMS is not detected but still enables DPMS:
Is this a problem with catalyst driver? I know it's not the PC or the monitor, because I have a 2nd PC with the same video driver with the same problem, but others without this driver don't (ati open source, nvidia, etc. all work fine.)
I'm wondering if the problem always existed before, but I just didn't notice it because the display sleep mode was never set? If that's the case, my hunch is that it looked like it worked because the monitor was smart enough to turn itself off when the screensaver kicked in and just showed a blank screen, and the video driver was never involved with sleep mode until I set it in gnome power manager, at which point it started showing this problem of not waking up? And because the screensaver was no longer set to blank the screen, but to show some animation, that's why the monitor will never sleep anymore?
I just upgraded from FC10 to FC11 (32-bit) on an old Dell laptop. I set my power management settings (in Gnome) to turn the monitor off after some idle period but always leave the computer running and the hard drives powered. I also set my screen saver to a blank screen. I noticed that the screen saver does come on (turning the screen black), but the monitor back lighting never goes off. I tried different idle times for the power management settings (I usually set it to 1 min, but some other posts implied that 11 mins might work). I should also mention that this is after I've logged into a user account, not sitting at the login screen.
I didn't have this problem in FC10 (the monitor would actually turn off) so I figured it was a bug in FC11, but I can't seem to find a thread addressing this issue. I've found some what similar threads, but none mentioning this particular problem.
Ever since I installed openSuse 11.2, my monitor wont turn off after I shutdown my computer.
The monitor light changes to orange, like its turning itself off. But then the light changes to green and the message "no signal detected" comes on - then the light turns orange. This cycle repeats untill I manually hit the power button to turn it off.
I booted to windows 7 (dual boot), shutdown, but it is still happening!
Like I said, this started happening immediately after I installed openSuse.
Last friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.