My asus 17" lcd VB171/VB191 monitor has started continuous beeping. Detaching the cable for sound from the computer, the beep stops, but it starts again by plugging the cable in. The motherboard is Tyan S2895 K8WE. The monitor has worked normally for one year.
View 10 Replies
I'm running ubuntu 9.10 on a Dell XPS M1530. Sometimes i get a _VERY_ loud beep-sound, eg when i run out of battery or, the case that has me coming here when i'm working in a virtual terminal (tty1-6) and hit backspace once too often, that is, when the command line is actually empty.Not that big of a deal you might think, but, especially when you're wearing good (read: possibly loud) headphones the experience is that god damn unpleasant that i'd like to make sure it won't happen again.Oh and well, just hitting mute (in gnome, which doesn't have a lot to do with tty1 anyways) won't do the job.
View 2 Replies View RelatedIt's annoying to get the system beep when I can't move the cursor anymore, is there a way to turn it off?
View 5 Replies View RelatedHow can I turn off the beep that happens when I backspace too many times in the terminal or other applications?
View 7 Replies View RelatedI have the typing break enabled through the keyboard preferences, and when the break ends, I hear an alarm beep (sounds like the alarm on a wristwatch) through my speakers.
For the life of me, I cannot figure out how to turn this off.
It did not always do this, but started when I upgraded my system to Fedora 12, and it persisted through to the upgrade to F13.
There are three computers in my office running F13, and mine is the only one that does this. I can find no trace online of anyone else having this problem.
Can anyone tell me how to turn this off?
I'm running Gnome 2.30.0 on Fedora 13 (x86_64)
OpenSuSE 11.3 Radeon graphics
How do you set it so the monitor does not turn off. I want to run a slideshow as the screensaver.
Is it at all possible to have the monitor turn on when I boot my computer?
View 1 Replies View Relatedhow to turn off your laptop screen in Ubuntu using a script/command, but none seem to have worked for me except one.
after digging around, I found the following suggestions:
1. xset dpms force off or xset dpms force suspend
This didn't work for many people, nor did it work for me, as the monitor would just turn on again after a few seconds. The second other suggestion I found to make this "stick was:
2. sleep 1; xset dpms force off
or sleep 1; xset dpms force suspend
This worked for some people, by delaying the monitor off function by one second, but it did not work for me, as the monitor would turn on again by itself after one minute exactly. Maybe those who thought this was the solution just walked away and never really found out their monitor plays sneak-peak with them. The next solution i found digging around was supposed to really make the monitor stay powered off:
3. sleep 1; && xset dpms force off
or sleep 1; && xset dpms force suspend
But this didn't work either; what a disappointment, and it also made my CPU and HDD freak out for a while while my monitor was off. So after some more digging around, I came up with the following: (and I don't remember where i got this, whether it was from here or elsewhere on the internet, but if it is your creation, please contact me and I'll edit the post to give you credit)
4. create a file and save as something like Monitor_off.sh in a folder of your preference with the following in it:
---------------------------------------
#!/usr/bin/python
import time
import subprocess
from Xlib import X
[Code]....
Then just go to: System>Preferences>Keyboard Shortcuts and assign a Keyboard combination shortcut to call and initiate the script. I chose "<Ctrl>+M" because it's easy to remember.
Make sure to disable any same keyboard shortcuts you may have in Compiz to avoid conflicts.
This final script just worked perfectly for me. And the Monitor just stays off until I shake the mouse or press a key on the keyboard, and my CPU and HDD don't rev up like a Harley. This final solution seems to be working for everyone of my friends without a glitch.
I have been dual booting my XP and Ubuntu for a while now. However, my pc monitor does not turn on until I am booted into windows/linux. This means I have to 'guess' to a certain extent which OS to select on boot (using GRUB). I expect I will have to change a setting in the BIOS but I am not too sure what to look out for.
After turning on my pc I have to restart it for it too do anything, it appears to just hang!However as I cannot see what is happening due to the monitor problem I am completely in the dark as to why it would do this/what is going on! I have XP installed at the front of my hard drive and Ubuntu at the back. It worked ok the first time I tried it after install (still had the monitor problem but was able to guess) then after that this random problem!
i currently use Slackware 13.1 64 bit. when i want to get back to console after use "startx" command, my monitor suddenly off and would not turn on until i restart my computer. so i could never get back to console when i've started x window.i use ATI HIS HD 5670.
View 1 Replies View Relatedi have a probelm once i leave my laptop there for a while the monitor turned off and there is no way for me to turn it back on, so i need to restart the machine.
View 3 Replies View RelatedI just upgraded from FC10 to FC11 (32-bit) on an old Dell laptop. I set my power management settings (in Gnome) to turn the monitor off after some idle period but always leave the computer running and the hard drives powered. I also set my screen saver to a blank screen. I noticed that the screen saver does come on (turning the screen black), but the monitor back lighting never goes off. I tried different idle times for the power management settings (I usually set it to 1 min, but some other posts implied that 11 mins might work). I should also mention that this is after I've logged into a user account, not sitting at the login screen.
I didn't have this problem in FC10 (the monitor would actually turn off) so I figured it was a bug in FC11, but I can't seem to find a thread addressing this issue. I've found some what similar threads, but none mentioning this particular problem.
Ever since I installed openSuse 11.2, my monitor wont turn off after I shutdown my computer.
The monitor light changes to orange, like its turning itself off. But then the light changes to green and the message "no signal detected" comes on - then the light turns orange. This cycle repeats untill I manually hit the power button to turn it off.
I booted to windows 7 (dual boot), shutdown, but it is still happening!
Like I said, this started happening immediately after I installed openSuse.
Last friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
When i turn on my monitor the screen goes blank, but the 'on' button is lit up. Any ideas of what the problem could be?edit: When i turn off and turn on my monitor, it displays what's on my computer for a couple of second and than the monitor turns off again.
View 7 Replies View RelatedI am running on ubuntu 10.04 and using the latest nvidia driver. What I experience is a random black screen, my monitor goes dead and won't turn back on till I hardboot. I had this issue on windows and solved it by downloading rivatuner and telling it to force my 9700m into staying in 3d performance mode at all times. I know it has nothing to do with temps or anything like that. All I need to know is how I can duplicate what I did with rivatuner on windows
View 1 Replies View RelatedHow to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
I am using anaconda + ks.cfg to install Linux.
In my case installation does not require any actions from me and there is no need to sit next to PC but it takes some time so I would like to hear some loud sound at the end of the process (e.g. something similar to result of echo -e "a" command) but I cannot find appropriate place in ks.cfg to add thing like this
My beep command stopped working -- it does not beep. I think this happened when I upgraded to Karmic (but could have been earlier). I use the beep command to notify me of important events.
I tried looking in sound settings, and did not find anything suspicious. I also tried googling but most stuff just describes how to "disable the annoying beep". Lastly, I tried different software channels and repositories to find an alternative program to the beep command, but nothing happened.
I use Mythbuntu 9.10 as HTPC and I got where I can turnoff the computer using remote. But how can I get a "beep" to be played during shutdown? by this I would know the computer is shutting off - it is behind a glas door so I don't see if the led's turns off.
View 3 Replies View RelatedWhen I was using Windows XP, my notebook was beeping very loud when it was running out of power. Since I use Ubuntu it doesnt. I have tried kpowersave but it somehow cannot play ANY SOUNDS. Now I use default power management and it doesn't beep too.
How can I fix it? Its quite important because I often forget to hook it up.
I have a HP Laptop with Ubuntu Hardy installed. The system beep makes rapid clicking sound at login window that slowly dissipate and clicking that, so far I can only fix by rebooting, when I play music, reboot after hibernating, and when waking up from suspend. I've turned the system beep off in System/Preferences/Sound but it doesn't do anything.
View 9 Replies View RelatedEvery time I shut down my laptop, this loud beeping noise comes out of my computer. It's just one beep, but it's loud and annoying. This has been happening recently, and not from the start of installing Ubuntu to my laptop.
View 1 Replies View Relatedafter installing linux mint 7, I have been getting one beep on shutdown, a google search on this came back as a ram problem...but then i ran across a bunch of posts on ubuntu forums about one beep on shutdown, with an older version of ubuntu, grep does return some paramter errors, but in the mint bug report page those are listed as : benign ignore. it doen't bother me in the least, as long as it isn't a warning of impending hardware failure.
View 5 Replies View RelatedHow to disable BEEP in Gnome settings under Lenny?
View 1 Replies View RelatedI have a habit of watching videos when I go to sleep. So I decided to start using, for example, the following when I laid down:
sudo shutdown -h -P 60
Of course this shuts down the computer in an hour. I was wondering if there was a way I could get the computer to beep a few times for the last 10 Minutes and then a few more times for the last 5 minutes?
This may seem like a stupid question (if not completely ridiculous ), but I was wondering if there's a way to configure audio events so that I can use a wav/ogg sound instead of the PC speaker's default beep for small events like hitting backspace in a text editor when it's the beginning of the document (or any other illegal keyboard action), or in Wine applications when it calls for an "asterisk" sound (it just beeps the PC speaker).
I've looked at similar threads, but they mainly just talk about either the beeps that the machine does when it boots up, or simply turning off the beeping completely. What I want to do is substitute the beeps (that are caused by the OS) for an actual sound that's played through the ALSA/OSS/whatever audio device.
I have replaced my motherboard, cpu, ram with a retailed 'bundle' of components. When I power up, the cpu fans spins and i can feel my hard drive vibrating but There is no post beep. I could connect one of two four pin pwr2 leads to a motherboard; the first has yellow and black leads, the second, red purple black and yellow. Have you any ideas on my next move?
View 2 Replies View Related
