Debian Installation :: VPN Not Addable In Network Manager
Oct 26, 2014
I have installed i guess everything needed to add a VPN in my network manager, but its greyd out.
Installed on the machine I have installed
i A network-manager - network management framework (daemon and u
i network-manager-gnome - network management framework (GNOME fronte
i network-manager-openvpn - network management framework (OpenVPN plug
i network-manager-pptp - network management framework (PPTP plugin
i network-manager-vpnc - network management framework (VPNC plugin
I have checked the synaptic too and everything seems installed.
debian stable and gnome classic
View 1 Replies
ADVERTISEMENT
Aug 20, 2010
Config: Squeeze, 2.6.32-5-amd64I just installed squeeze and the network is up and nm-manager deamon if working but the Gnome applet doesn't seem to work as usual. It indicates no network although the network is available as indicated by ifconfig and route below. When I switch WiFi on, the nm works flawlessly. When I click on the applet icon it says "Wired Network: device not supported" (or similar, msg in french is
eth0 Link encap:Ethernet HWaddr 00:1f:e2:12:ea:d8
inet adr:192.168.0.182 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21f:e2ff:fe12:ead8/64 Scope:Lien
[code]...
View 3 Replies
View Related
May 27, 2009
i'm trying to install virt-manager , to run a couple of virtual machines, i created a virtual nic vnet0 and bridged it to my eth0, i have configured the /etc/network/interfaces file with proper static ip, but i beleive the network manager is renaming my nic to eth1 and causing all kinds of problems. I uninstalled network manager and now i can ping anywhere in the network, but not outside it. ie google.com
View 5 Replies
View Related
Sep 1, 2011
I downloaded Debian Stable last night, and everything appear to go smoothly. Today, I booted up the new OS to try it out for the first time. As I was exploring a few of the features, I decided to pull up a web browser. No internet connection.
No big deal, I thought, as I searched around for a way to connect wirelessly. I couldn't find a way to do so. I consulted one of my more Linux savvy friends, who advised me to pull up the terminal and enter a command to start the network-manager. According to the terminal, no such file currently exists on my system.
This is a bit of a conundrum for me, since I am on my university campus with no ethernet cord to attempt a direct connection. Is there any way to get the network-manager onto my computer? Also, did I mess up somewhere in the installation, or did someone not package the file with CD1 for some unknown reason?
View 14 Replies
View Related
Jan 16, 2011
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
View 4 Replies
View Related
Nov 13, 2015
In Googling around it appears that the Network Manager used to have a nice simple (obvious, logical, straightforward, intuitive, easy-to-use... ... can you tell I'm a bit surprised that there's not a simple button to do this, it's pretty common functionality ) option in the IPv4 tab called "Shared to other computers" allowing you to share your network connection with any computers connected to yours... kind of like this:
[URL] ....
Professor Google seems to indicate that this may have existed in Debian at one point but, I don't see this option anymore. How do I get it back (or is there another gui way to do this without editing the /etc/network/interfaces file... if there's no other way to do this... that's fine but I'd prefer an easy method of enabling and disabling sharing)?
What I'm trying to do... I have a Beaglebone Black connected via IP over USB. When I'm ssh'ed into the BeagleBone, I want to be able to use aptitude install to grab new packages etc... and that kind of requires access to the outside world. Everything I've found so far seems to to require a modification to the interfaces file but since (according to the interfaces man page) the preferred method is to use the network manager if possible... I'm trying to avoid that.
* It should be noted that I'm running sid with the experimental 4.3 kernel so... maybe in doing so I've shot myself in the foot?
View 5 Replies
View Related
Mar 2, 2010
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies
View Related
Feb 14, 2011
I have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.
View 1 Replies
View Related
Jan 10, 2010
I have been trying to get network-manager up and running in order to connect to my work's VPN easily, but it is proving to be a real pain. I am using Debian Lenny.
I then added myself to the group netdev and rebooted but it is still not running. What's more, when installing network-manager, aptitude has also installed resolvconf which screwed up my /etc/resolv.conf. It decided to make a symlink of resolv.conf to '/etc/resolvconf/run/resolv.conf' which doesn't exist and 'run' is itself a symlink to '/lib/init/rw/resolvconf' which doesn't exist! Talk about simplicity. So I just manually created and altered a new resolv.conf.If anyone knows what is going on with network manager then any help would be much appreciated.One last thing: I read that I need to comment out any configuration of eth0 from /etc/network/interfaces in order for network-manager to manage said interface. I previously had eth0 setup with a static IP. I trust network-manager will allow me to do this once it starts behaving?
View 6 Replies
View Related
Feb 14, 2010
My wireless works without issue with network manager. However I notice that it seems to be a gui only app. That is, when I stop the display manager my laptop loses internet connectivity. The NetworkManager service is still running. Is there a commandline method of using the NetworkManager settings to start the wireless connetion?
View 14 Replies
View Related
May 19, 2011
I have stop using debian some months but I decide to come back. Yesterday I have make a clean install of debian squeeze. The network manager never rember my wireles password. Every time I open the pc it ask me the keyring password and the wireles password. Why network manager can't rember my passwords? Also I have a strange problem when I try to gain root acces. If I try to open synaptic or to mount a ntfs partion it ask me the root password but every time I type my root pass it says that its incorrect but I am absolutely sure that I type my root pass correct. Also if I try to gain root acces from terminal with su its became the same thing but after some tries it takes my pass as corect. So every time I type my root pass from a gui like gksu it always says that is incorect but if I type my pass in terminal it take it correct after some tries. In the past I have again installed the debian from the same cd on the same pc but I had never those problems. What can be wrong?
View 6 Replies
View Related
Nov 22, 2010
I was a ubuntu user for 3 years but all that 6 month release and reinstallations and bugs gave my nerves so I decided to turn to the real OS debian and hopefully stick to it. The only problem I have is that although wired internet connection is working the network manager app shows no connection and the wireless is also not working. I have an LG R500 laptop and never had the same issue with ubuntu before.
View 14 Replies
View Related
May 22, 2011
Fresh install of squeeze gnome, completely updated.
My network connection is working fine, but the Network Manager in the system tray shows "no network connection."
When using the live dvd, and during the install, it showed that it was connected.
View 5 Replies
View Related
Nov 28, 2015
It seems that my network manager may be running in root mode...
For instance in network connections, edit and delete are greyed out. if i click add, i am unable to enter any details. if i run nm-connection-editor as root i am able to make changes.
How can i set it that the normal user can make changes? [managed is set to true in the conf file]
View 6 Replies
View Related
Mar 22, 2011
My ethernet and pppoe internet connection worked flawlessly in lenny. I erased my hard drive and installed squeeze and now only internet works. (There is a pop-up that says that my wired connection is disconnected and shortly after there is another pop-up saying that my internet is connected.)1.my user is in the netdev group2./etc/network/interfaces only contains:
auto lo
iface lo inet loopback
3. /etc/NetworkManager/NetworkManager.conf only contains:
[code]....
View 4 Replies
View Related
Jul 31, 2011
Okay, so today I decided I was bored with my current Fedora 15 installation and tried a little distro hopping. Eventually I ended up at Debian Squeeze. I downloaded the cd version as a net install won't work because of driver issues. I used the graphical interface to install it.When it finished installing I booted it up, made sure everything was working. Now in all my past I think 6 linux installations, all I had to do to get the internet working was move a file someone gave me a while to my /lib/firmware. I'm not sure if this is the problem, but no matter what, where ever I go, I can't find an actual manager to connect to the internet. This might be a stupid question to a lot of people, but I'm stumped. There is nothing in the menu's.
Now I've been working with GNU/Linux for almost a year now and have come across many problems, but never like this. I've Googled up and down, and searched the forums here and still nothing. I've looked in the menu's and the only network related thing is network-proxy. Just for kicks I also tried
View 11 Replies
View Related
Sep 2, 2011
I have been trying to follow this guide for dnssec http://wiki.debian.org/DNSSEC in which at the very last it gives that you should change the value in /etc/resolv.conf to 127.0.0.1 Now in mine, network-manager overwrites the values. Is there a way to stop network-manager from overwriting the values in /etc/resolv.conf ?seems the simplest is to write-protect it. chattr +i /etc/resolv.conf
View 8 Replies
View Related
Jul 23, 2015
Since a recent update on Stretch, I have been unable to use the network-manager to connect to my home wireless network on my laptop. It was working fine before. I did not change any settings on the WLAN router. I can still connect to other wireless networks at work and university, just not this particular one at home. All other non-Debian devices in my household are still able to connect just fine.While figuring this out, I have tried connecting manualy with ifup but I don't really know how that works. Right now there is only the loopback entry in /etc/network/interfaces.
Below is the output of syslog, when gnomes network-manager is trying to connect, but fails.
Code: Select allJul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: starting connection 'Affenbande'
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) started...
[code]...
View 14 Replies
View Related
Dec 7, 2015
I just upgraded my Debian stretch via apt-get and I noticed that the network manager is missing at least 2 icons: the mobile broadband icon and the settings icon. I haven't found any bug reports or other information about how to restore them. The icons were there after initial installation of version 8.2.0 from DVD.
KDE Plasma version 5.4.2
Qt Version 5.5.1
Kernel Version 4.2.0-1-amd64
View 14 Replies
View Related
Feb 16, 2016
After fossicking around I can not find anything around that I can invoke in a terminal to configure settings in network-manager. The applet(?) on the task bar doesn't ask for a login, so options are grey/grayed out. The "program" in the applications menu is similarly grey/grayed out.
If it was a once off, then I suspect that it would be simple as login as root to start X, but I have a series of config files to edited each time of their initial use. also, there is the ongoing problem of vpn target switching.
woops; wheezy with xfce4 and everything is uptodate.
View 5 Replies
View Related
Apr 10, 2011
I can't seem to get this to work without having to physically create connections as root. The "Available to all users" in the nm settings box remains uncheckable, despite completing the following tasks:
Ensuring NetworkManager.conf contains
[main]
plugins=keyfile
[code]...
View 3 Replies
View Related
May 2, 2011
After today's squeeze update the nm-applet (it updated it to version 0.8.4-1) crashes when trying to connect to my vpn (pptp). I'm pretty new when it comes to this so I'm not sure what to do. I tried looking at the log file (applications--> system tools-->log file viewer) but I don't know what to make of it.
Heres the log file before it crashes:
View 1 Replies
View Related
May 16, 2011
I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
View 1 Replies
View Related
Mar 9, 2011
I have setup my laptop to connect to a VPN server running openvpn.
This works fine if I from the client, start OpenVPN from the terminal. /etc/init.d/openvpn start
It then asks for a password for the certificate, which is should.
I have then installed the OpenVPN option for the Gnome network manager (network-manager-openvpn), so I could use the nm-applet for this, instead.
But it seems to be that there is a little bug, so I does not prompt me for the certificate password, OR use the password this is actually set for the certificate. (kinda irritating)
I get the following error on on the client.
nm-openvpn[2936]: ERROR: could not read Private Key username/password/ok/string from management interface
It seems like an very old bug, I tried the following without any luck (Yes I noticed it was for Ubuntu). [url]
View 1 Replies
View Related
Feb 26, 2010
I use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies
View Related
Jul 3, 2011
I've been dual booting Windows 7 and Debian on my desktop ever since. But recently I installed Debian again on a new laptop that I recently bought and unfortunately it's being very different from my first successful installation. The first problem is that Network Manager is not picking up internet on the new laptop. The Wireless tab is grayed out, so I can't click it and look for a new one. I've been using Wired internet since, but if I want to take it to work I have to have it be Wireless-able. Currently my Wireless Card is a Broadcom 4313 802.11 b/g/n which I'm fairly sure is supported. The second problem is installing Firefox. On my first installation it worked fine, and the bin file loaded and everything. However, for this second one that's been a completely different situation and the bin file hasn't worked (by this I mean I can't double click it to open it).
View 6 Replies
View Related
May 6, 2010
I'm trying to use network-manager in sid and it's incredibly frustrating because every 2 minutes or so it seems to scan for wireless access points, during which time my SSH connections completely hang and screw up. Pings start dropping packets as well. By doing an "iwlist scan" I can reproduce the behavior. Has anyone else dealt with this? I haven't been using network-manager, but I am currently due to mobility and needed VPN functionality... WICD with no network-manager works better but there's no gui-based VPN support. I've got an Atheros wireless device and I've read that supposedly it should be doing background scanning since kernel 2.6.32, but I haven't seen anything like that, and I'm on 2.6.32-5-amd64 currently, 2.6.32-3-amd64 behaves the same too.
View 4 Replies
View Related
Jul 5, 2011
Its my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
View 2 Replies
View Related
Apr 4, 2016
I'm running Debian testing. I am running the iwlwifi driver and I have an Intel Centrino Wireless-N 1000 card. I have a fresh install of iwlwifi and network-manager. After sleep or after being shutdown, network manager cannot find my network's SSID. I have to wait ~5 minutes for it list my SSID. I dual boot this laptop with Windows 7, and on Windows, I connect to the internet instantly after boot. I did not have this issue before, the only thing I have changed was installing blueman and the necessary components. After I installed and uninstalled these bluetooth components, I have been getting these problems. Here are some outputs:
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11bgn ESSID:"Dotcom"Â
     Mode:Managed Frequency:2.462 GHz Access Point: 14:AB:F0:3D:DC:20 Â
     Bit Rate=81 Mb/s  Tx-Power=14 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
[Code] .....
View 14 Replies
View Related
Feb 7, 2010
I have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
View 5 Replies
View Related
