I was a ubuntu user for 3 years but all that 6 month release and reinstallations and bugs gave my nerves so I decided to turn to the real OS debian and hopefully stick to it. The only problem I have is that although wired internet connection is working the network manager app shows no connection and the wireless is also not working. I have an LG R500 laptop and never had the same issue with ubuntu before.
View 14 RepliesShould this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
In Googling around it appears that the Network Manager used to have a nice simple (obvious, logical, straightforward, intuitive, easy-to-use... ... can you tell I'm a bit surprised that there's not a simple button to do this, it's pretty common functionality ) option in the IPv4 tab called "Shared to other computers" allowing you to share your network connection with any computers connected to yours... kind of like this:
[URL] ....
Professor Google seems to indicate that this may have existed in Debian at one point but, I don't see this option anymore. How do I get it back (or is there another gui way to do this without editing the /etc/network/interfaces file... if there's no other way to do this... that's fine but I'd prefer an easy method of enabling and disabling sharing)?
What I'm trying to do... I have a Beaglebone Black connected via IP over USB. When I'm ssh'ed into the BeagleBone, I want to be able to use aptitude install to grab new packages etc... and that kind of requires access to the outside world. Everything I've found so far seems to to require a modification to the interfaces file but since (according to the interfaces man page) the preferred method is to use the network manager if possible... I'm trying to avoid that.
* It should be noted that I'm running sid with the experimental 4.3 kernel so... maybe in doing so I've shot myself in the foot?
Fresh install of squeeze gnome, completely updated.
My network connection is working fine, but the Network Manager in the system tray shows "no network connection."
When using the live dvd, and during the install, it showed that it was connected.
I can't see any of my devices showing up in network manager to configure even though they're using dhcp and working. How do I get them in so I can configure a proxy?
View 3 Replies View RelatedI got "network manager" installed, and it shows up in "starup applications;" however, it doesn't show in the taskbar. how can I put it there?
View 1 Replies View RelatedI have just intsalled Gnome3 and GS with the Ricotz ppa. My network manager is showing as invalid, I am still connected to the net but I cant do anything with my network settings.
View 1 Replies View RelatedNetwork Manager icon aint showing, neither is the power manager. Im using "alt+f2" the nm-applet to get the NM work but removes after reboot, so i have to do this all time.. uhm, when trying to enable desktop effects is sats "searching for available drivers" and then "Desktop effects could not be enabled". When trying to install apps from Software center, neither of the apps installs, the button install just keep refreshing, but if i go terminal: sudo software-center im able to install everything.
View 4 Replies View RelatedI have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
View 9 Replies View Relateda Toshiba L650 laptop, and installed F13 x86-64 on a disk partition using install DVD. The wired ethernet on this is Atheros AR8152, and the Wireless is Broadcomm 4313. Both these devices are not supported by default. So, as per instructions on the Linux Wireless site, and some guidance on this forum, have downloaded the Broadcomm driver tar on another machine, copied it onto the Toshiba laptop using a USB device, and then extracted, and ran the b43-fwcutter. The subdirectory /lib/firmware/b43 is created and has approx 3 dozen files. However, the Broadcomm driver is not showing up as an option in the Network Manager (system-config-network) or in the lsmod command output. I tried to manually add it by doing modprobe b43 command - it then begins to appear in the lsmod, but the option to add the Broadcomm wireless driver during a "New wireless Hardware" is not appearing still. I think, at an abstract level, I need to somehow "tell" the system to add the Broadcomm driver - am just not sure how to do so. On the other hand, the Atheros AR8152 has no driver as of now, so the wired Ethernet is also not connecting. how I can download all the required files on a different machine, and then install it on the Toshiba laptop?
View 7 Replies View RelatedMy family uses a computer running Ubuntu 10.04. We each have a separate login. This computer connects to the internet via wifi.
A behaviour which I have noticed is as follows - the first user to log in gets the network manager applet icon. So they can control the network connection. Any other user that subsequently logs in does not.
Now this is a real pain in the butt as sometimes our wifi connection drops and I might have left my wife logged in and used the 'switch user' function to get access to my login. The only way I can access the applet is by switching back to her login.
Is there any way to make this appear in everyone's login's at the same time?
I seem to have a little problem with the Network Manager applet - it works vaguely OK, even if it takes a bit long to find my connection, but when I click on the icon, the menu doesn't show.I have also installed the applet through the Ubuntu Software Centre.Just to clarify, the icon appears fine in my panel, and the notifications appear when I am connected, it's just that the menu doesn't appear at all.
View 5 Replies View RelatedI have recently upgraded the ubuntu desktop edition from 8.04 to 10.04. after upgrading i cannot show my eth0 nic interface in the System > Preferences > Network connections----- wired tab. and i also not getting network indication in the top of the panel beside the date time indication. but i can access network and using internet with that lan card. i cant understad my eth0 is connected or unpluged..
View 3 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View Relatedi'm trying to install virt-manager , to run a couple of virtual machines, i created a virtual nic vnet0 and bridged it to my eth0, i have configured the /etc/network/interfaces file with proper static ip, but i beleive the network manager is renaming my nic to eth1 and causing all kinds of problems. I uninstalled network manager and now i can ping anywhere in the network, but not outside it. ie google.com
View 5 Replies View RelatedI just brought up FC12 on our VSphere to begin testing..The nic did not configure properly for some reason.. I was able to go to command line, and do an "ifup ifcfg-eth0" and DHCP got an address. Go into GNOME - System-Administration - Network , or system-config-network the "Activate/Deactivate" is greyed out. Also, GNOME - System-Administration - Network Device Control show NO device..
View 1 Replies View RelatedIm new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
with the ifup method everything works fine. But now I bought a wireless card, so I prefer to use the network manager to manage my connection. On my computer I need a static IP for wired connection, so I created a new wired connection and I called it "wired connection". But network manager always connect automatically to "Auto eth0" and I can't find how to modify this connection. Setting "wired connection" as default didn't change anything, probably becouse it need me to unlock the default wallet... Now, another problem, I really don't know why network manager applet doesn't appear on system tray, but I'm sure that I'm using it instead of the ifup method.
View 9 Replies View RelatedWhen I disable nm-applet from startup I do not have the problem, however then I cannot select a wireless connection. I have checked and Ethernet connections work and so does have nm-applet open (without connecting to my wifi network).
View 9 Replies View RelatedI just wanted to know what's your opinion on my problem.I have few linux servers that can be located on any place in the world, only port 22 is open. At my office I need connection to every server, but every server must be isolated from every server.So by now I worked only with ssh authorization by username and password. What seems to be preferable ?.
1 Going on working with ssh with authorization.
2 working with ssh but with adding keys
3 start to work with vpn
So if I am keeping use ssh with authorization I need something that will change password every month only for security working with ssh key, it seems like key depends on gateway where key created so if change gateway I lost connection using vpn sounds good but in this case I mush isolate servers from each other.The best solution I think is combination of any two methods
I have an issue with network-manager. When I edit my wireless settings and enable 'Allow all users' (I have a german locale so I don't know the exact words but I guess it's close enough) the connection drops and doesn't reconnect. If I click on the wlan access point manually (in the nm-applet) it asks for my WPA pass. This is odd since it was already in the wlan settings.
Then when I reset the 'Allow ...' to off, I'm asked for my su passwd and the connection is re-established. Ideally the nm would connect automatically at boot if the AP is available so I'm not happy with the current state...
I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?
View 6 Replies View RelatedFresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.
What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.
After connecting my phone via bluetooth using Blueman and then activating Dialup connection in Blueman, it says "Now DUN is available in Network Manager" or something like this. But, there is NOTHING about DUN connection in NM. What this thing is telling about?
View 5 Replies View RelatedI can't make dsl connection using network manager,
View 9 Replies View RelatedIs network manager fixed in ubuntu 10.04, can I make dsl connection using network manager?
View 4 Replies View RelatedI just switched to Ubuntu from Win7 and want to setup VPN connection to my office network. On windows I was using SonicWall Global VPN client using details:
Host: <myname>.dyndns.org
User: <user>
Pass: <pass>
I read in DynDNS.com that simple VPN connection from network manager will not work here and ddclient need to be installed.
I installed an old laptop with Xubuntu and confirmed the wireless card was working by bringing up a couple of nearby networks owned by my neighbors.
However every time I book the computer, a popup login form comes up for them, which I don't want. How can I delete these from the 'cache'?
I use network Manager to connect to wireless broadband on Fedora 12.Are there any tools that can provide me logs about connection times, bandwidth monitoring etc.Basically, I need logs like what kppp provides with accounting.
I can use kppp to connect and get the logs I need but I want to connect to the network as soon as I plug it in - Only Network Manager allows this.
I'd like to use NetworkManager on a freshly installed CenntOS 5 on laptop Lenovo ThinkPad T61p. I followed: [URL] Everything went OK, until I selected my active LAN connection in "Edit Connections". After clicking on "Edit", it's not possible to change anything - all is grayed-out. I'm guessing it's a permission problem. But I don't know the internal structure of NetworkManager and what files to look at. I was also expecting that after stopping the network service "Syetem->Admin->Network" would be inactive, but it isn't. Shouldn't the old network manager be uninstalled as well?
View 18 Replies View Related