Debian Installation :: Kernel Backport For Jessie (8.0)?

May 16, 2015

I installed the 32 bit version of Debian Jessie (8.0) on an Asus X205TA. The Asus X205TA laptop is quirky like a lot of Intel Baytrail Atom laptops/tablets in that it has 32 bit EFI but a 64 bit capable CPU, and installing Linux on them is an exercise in frustration. Jessie is probably the first distro to support 32bit EFI out of the box, and the install went surprisingly smoothly. As expected the sound and built in WIFI does not work, but everything else seems to work well.

I spent half a day compiling the 4.03 kernel but it crashes on boot, and I ended uninstalling it in frustration.

Is there any backport of the 4.0 (or 4.1 which is currently a release candidate) for Jessie? Debian also seems to have pulled the kernel image off of their "experimental" repository.

[URL] ....

View 6 Replies


ADVERTISEMENT

Debian :: Removing Backport Kernel Packages ?

Sep 19, 2010

In trying to get something else working, I installed a newer version of the kernel from backports (I'm on 2.6.26 lenny and the backport kernel is 2.6.32). That failed, so I want to remove the backport kernel completely.

I tried:

Code:

and got:

Code:

Accept this solution? [Y/n/q/?]

I don't really understand how these metapackages work and I don't want to accidentally remove my currently-working kernel.

What's the correct way to remove all packages related to the backports kernel and leave the existing lenny ones alone?

View 4 Replies View Related

Debian Configuration :: Boot Kernel Panic After Upgrade To Backport 2.6.39

Aug 21, 2011

I am running Debian squeeze. A while ago I upgraded my kernel to 2.6.38 from backports. Just now I thought it would be good to upgrade to 2.6.39 from backports. Upgrade went fine, but after rebooting I get a kernel panics rightaway.

"No filesystem could mount root, tried:"
"Kernel panics = not syncing: VFA: Unable to mount root fs on unkown-block(0,0)."

This is the first time one of Linux installations halts/panics on booting, so I don't know what to do now. I tried booting the recovery entry from the grub boot menu, but same result.

View 6 Replies View Related

Debian Configuration :: Squeeze Backport Kernel 2.6.38 - Only A Console Login Prompt No GUI

May 22, 2011

I installed 2.6.38 from backports. It boots OK, and among the start-up messages it says it has started kdm, but then it offers only a console login prompt, no GUI. I assumed (perhaps optimistically?) that newer kernels would be backward-compatible, and that any dependencies on other software would be enforced by the package mechanisms. Running amd64, Squeeze, KDE.

View 6 Replies View Related

Debian Installation :: Automount Of NTFS Partitions (Jessie Old Kernel)

May 23, 2015

I've just upgraded my system and I'm having some issues to boot with the latest kernel (cf: [URL] ....)

Hopefully I can still use the previous kernel (vmlinuz-3.2.0-4-686-pae).

I'd like to watch a movie that is on an NTFS partition.

From gnome-classic, I went in Places->datas (name of my partition) and I get this error message:

Code: Select allFailed to open "/media/mb/datas".

Error when getting information for file '/media/mb/datas': Input/output error.

The result of a df -h gives me:

Code: Select all/dev/sda3      fuseblk    96G   60G   37G  63% /media/mb/datas

mb is the username I'm currently using.

Previously it was only trying to mount the partition (after asking for the root password) in /media/datas

Is it normal that now it tries to mount it only for my current user in another folder?

If I look in the /var/log/messages, I only see this:

May 22 23:53:06 Tieum-Latitude gnome-session[2092]: Thunar: Failed to open "/media/mb/datas": Error when getting information for file '/media/mb/datas': Input/output error

View 3 Replies View Related

Debian :: Difference Between Kernel Version And Backport Version

Mar 8, 2011

Sometimes a kernel image seems to have the same version as the backported kernel image, for example:
linux-image-2.6.32-bpo.5-amd64
linux-image-2.6.32-5-amd64

What are the differences between the two?

View 5 Replies View Related

Debian :: Moderncv Class Is Not Working With Backport Installation Of LyX

Oct 20, 2010

I am trying to upgrade my texlive installation. I am currently using Lenny, but it turns out that the moderncv class is not working with my backport installation of LyX (1.6.5) and the classicthesis class is missing (which was previously available for debian). It turns out that the new versions of these packages are the in the testing branch, so I added that branch to my repos.Now, if I wish to install the relevant new versions of the texlive packages, synaptic told me that it must remove and upgrade things like KDE from 3 to 4! which has nothing to do with texlive that. I do I do then? Can I avoid changing my trusty KDE 3.5?

View 3 Replies View Related

Debian :: Installing Kernel 3.16 On Jessie

May 13, 2015

So, I did the upgrade to Jessie today and everything went fine and I do like the gray look of the Gnome Classic Desktop. Not much change here.

But it is impossible for me to install the 3.16 kernel.

When I try, I get the following error (sry, it's german, but you should get the point):

Code: Select allE: /var/cache/apt/archives/linux-image-3.16.0-4-amd64_3.16.7-ckt9-3~deb8u1_amd64.deb: Extrahierte Daten für »./lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko« können nicht nach »/lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko.dpkg-new« kopiert werden: Es konnte nicht geschrieben werden (Auf dem Gerät ist kein Speicherplatz mehr verfügbar)

It basically says, there is not enough space on /lib to copy the modules for the new kernel. (I have about 100M free there.)

df -h says:
Code: Select all/dev/dm-1               322M    209M   97M   69% /
udev                     10M       0   10M    0% /dev
/dev/dm-2               8,3G    5,6G  2,3G   72% /usr
/dev/sda1               228M     28M  188M   13% /boot
/dev/mapper/linux-var   2,8G    577M  2,1G   22% /var
/dev/mapper/linux-tmp   368M     11M  339M    3% /tmp
/dev/mapper/linux-home   58G     55G  628M   99% /home

So, as you can see, there isn't that much space on / at all - don't blame me, blame the Lenny Installer. Personally I can live with the 3.2 kernel but I wonder if there is any possibility to install the never one without a total re-partitioning.

View 3 Replies View Related

Debian :: Jessie Freezes - When Run Several Applications Kernel 3.16 Fails

Dec 1, 2015

I have dist-upgrade from Wheezy to Jessie, however it randomly freezes. Everything was okay with kernel 3.2, but when I run several applications kernel 3.16 fails.

At below you can see the dmesg output of Jessie:

Code: Select all[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)

[Code] ....

View 13 Replies View Related

Debian Configuration :: How To Load Own Kernel-module (KO) In Jessie

Mar 14, 2016

I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type

Code: Select allsudo modprobe 8821au

I get a

Code: Select allmodprobe: FATAL: Module 8821au not found..

But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:

Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko

it seems to work:

Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.

But lsmod doesn't show me the module after that.

I also added

Code: Select all./kernel/drivers/edimax/8821au.ko

to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.

So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.

View 3 Replies View Related

Debian Multimedia :: Fix Update Notifications After Backport?

Jul 9, 2011

I've used the backport described on the debian news to switch from Open Office to Libre Office. It didn't work with Synaptic, but without any complications when I used "apt-get" on the command line.

Unfortunately this left me with a confused synaptic package management:

My former Open Office is gone, but I get notifications for an Open Office update. I tried to solve the problem by deleting the backport-ressource from my sources list, but the notification won't vanish.

Except Libre Office I'm using a clean squeeze installation without anything I couldn'd find on the main sources list...

Does anybody know how I can get rid of this useless notification?

View 8 Replies View Related

Debian Configuration :: Backport Version Lagging Behind On Armhf

Mar 17, 2016

On my raspberry pi 3 with debian jessie I'd like to install a new version of ejabberd (xmpp/jabber server). For some platforms, the latest version 16.02 is available under jessie-backports, but for armhf, it is not: in the table at the bottom of <https://packages.debian.org/jessie-backports/ejabberd>, next to armhf is the version 16.01 listed in red, instead of 16.02 in green as for amd64 etc. What do these colours mean, and why the difference in versions? Will 16.02 become available for armhf as well in the (near) future, or is this an indication of a more serious problem?

Jessie's older version 14.07 does not offer the features I need, and 16.01 does not run at all; hence my hopes are pinned on 16.02.

View 2 Replies View Related

Debian Configuration :: Public Key Error In Squeeze Backport ?

Jun 22, 2011

Just added Squeeze multimedia repositories in source list,but get this after reload :

W: GPG error: ftp://ftp.debian-multimedia.org squeeze Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 07DC563D1F41B907

However,update for Audacity & Mplayer showed in Update Manager,and I successfully updated.

View 4 Replies View Related

Debian Hardware :: Wheezy - Cannot Upgrade Nvidia Driver To 319.82 Backport

Nov 17, 2014

I'm on Wheezy with version 304.117 of the proprietary nvidia driver installed and working, but an application I have needs a newer version of the driver. I'm trying to install the 319.82 version in backports by following the instructions given here, but when I issue the command to install nvidia-kernel-dkms, I get the following:

Code: Select all> sudo aptitude -t wheezy-backports -r install nvidia-kernel-dkms

The following NEW packages will be installed:
  libgl1-nvidia-glx-i386:i386{a} nvidia-driver{a}

The following packages will be REMOVED:
  libgl1-nvidia-alternatives{u} libglx-nvidia-alternatives{u}
  libxvmcnvidia1{u} nvidia-glx{u}

The following packages will be upgraded:
  glx-alternative-nvidia glx-diversions libgl1-nvidia-glx
  libgl1-nvidia-glx:i386 libnvidia-ml1 nvidia-alternative
  nvidia-installer-cleanup nvidia-kernel-dkms nvidia-settings
  nvidia-smi nvidia-vdpau-driver xserver-xorg-video-nvidia

The following partially installed packages will be configured:
  mint-flashplugin-11:i386
12 packages upgraded, 2 newly installed, 4 to remove and 151 not upgraded.
Need to get 32.3 MB of archives. After unpacking 9,440 kB will be freed.

The following packages have unmet dependencies:
 glx-alternative-mesa : Depends: glx-diversions (= 0.2.2) but 0.5.1~bpo70+1 is to be installed.
Internal error: found 2 (choice -> promotion) mappings for a single choice.
Internal error: found 2 (choice -> promotion) mappings for a single choice.

The following actions will resolve these dependencies:

      Remove the following packages:                                     
1)      glx-alternative-mesa                                             
2)      glx-alternative-nvidia                                           
3)      libgl1-nvidia-glx                                                 
4)      libgl1-nvidia-glx:i386                                           
5)      nvidia-alternative                                               
6)      nvidia-kernel-dkms                                               

[Code] ....

Accept this solution? [Y/n/q/?] q

The mint-flashplugin problem is a separate issue which I've had for a while. I assume that it can be ignored for the purposes of this post.

If I'm reading the aptitude output above correctly, it's telling me that the only way to "resolve" the conflict is by uninstalling all nvidia support, leaving me with no driver at all. Is that right?

View 2 Replies View Related

Debian :: Jessie 8 Update - Boot Grub Shows Now 2 Kernel Versions To Boot From

May 2, 2015

After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.

3.16.0-4-amd64
3.16-3-amd64

- How do I know which one is the newest and if happy with it, how to remove the older one?

View 9 Replies View Related

Ubuntu Installation :: GEM Memory Leak From GLX 1.4 Backport, First Step?

May 15, 2010

I can confirm my machine's GLX version is 1.4, and I definitively get the slow down problem, however, after running in a terminal:

Code:
grep "object bytes" /sys/kernel/debug/dri/0/gem_objects
grep: /sys/kernel/debug/dri/0/gem_objects: No such file or directory
What am I doing wrong?

View 1 Replies View Related

Debian :: How To Remaster Jessie Installation

Oct 9, 2015

I'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.

View 4 Replies View Related

Debian Installation :: Jessie Won't Boot

Sep 26, 2015

I have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.

For example, something, it fails at the following:
[ OK ] Started LSB: REP portmapper replacement
[ OK ] Reached target RPC Port Mapper
Starting LSB: NFS Support files common to client and server

Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.

View 6 Replies View Related

Debian Installation :: Jessie Update Failed

Aug 16, 2014

I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:

Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)

View 5 Replies View Related

Debian Installation :: Booting Jessie 64b With UEFI From USB

Sep 30, 2014

I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.

After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.

I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.

Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.

View 6 Replies View Related

Debian Installation :: How To Select KDE In Jessie Installer B2

Oct 28, 2014

I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?

View 2 Replies View Related

Debian Installation :: GUI Flickers After Upgrading To Jessie

Mar 12, 2015

I have just Upgraded debian wheezy to jessie but after upgrading , the gui seems to flicker areas of gui are not repainting on closing applications ,windows do not render properly.

View 5 Replies View Related

Debian Installation :: Bluetooth Not Working On Jessie

Mar 20, 2015

How to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.

So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.

lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1

[Code] ....

View 4 Replies View Related

Debian Installation :: Overwrite Wheezy With Jessie

Jun 20, 2015

I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.

I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?

View 11 Replies View Related

Debian Installation :: 8.3.0 Jessie - Some Programs Don't Open

Feb 27, 2016

I have a new installation of Debian 8.3.0 Jessie which I have been playing with and enjoying for a couple of weeks. Ever since I installed the operating system to my computer, I have noticed a few different programs just won't open. For example Nepomuk Back Up and Nepomuk Cleaner. I do not know if these programs shipped with the original installation or if they got installed with a package later, but when I try to open these applications the ball just bounces for a minute then disappears. I went to my package manager and uninstalled these applications and then reinstalled them, but there has been no change in behavior. Gparted also does the same thing, but with Gparted the little ball bounces for quite awhile before it disappears.

View 14 Replies View Related

Debian Installation :: Installing Jessie In Virtualbox Fails

Aug 6, 2014

I'm just trying to install a Jessie i386 image in Oracle Virtualbox.

My host specs are:
Windows 7 Home Premium x64

Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.

When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..

View 4 Replies View Related

Debian Installation :: Tty2 To Tty6 Have Disappeared In Jessie

Nov 14, 2014

I just installed Jessie amd64 for the first time. Few problems so far, but Alt-F2 to Alt-F6 no longer switch to another tty - there's just a black screen with a flashing cursor that doesn't respond to keystrokes. I rely on being able to switch between ttys a lot, so this is inconvenient.

I've searched and found a workaround for grub2, but I'm using grub-legacy (and don't want to switch to grub-pc as it's over complicated IMO). Graphics hardware is AMD 780G/SB700 (using firmware in firmware-linux-nonfree).

View 6 Replies View Related

Debian Installation :: How To Install Libpam-mount On Jessie

Dec 4, 2014

I have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?

Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib

[code]....

View 3 Replies View Related

Debian Installation :: Install Jessie From RC1 Or Do Upgrade From Stable?

Mar 7, 2015

I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.

View 8 Replies View Related

Debian Installation :: Custom Keyboard Layout On Jessie

May 23, 2015

I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:

- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem

Code: Select all       <variant>
          <configItem>
            <name>accentsFR</name>
            <description>English (UK with french accents)</description>
          </configItem>
        </variant>

- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst

Code: Select all  accentsFR       gb: English (UK with french accents)

So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)

Here is the snapshot of the keyboard input source settings: [URL]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved