i am not able to mount a pen drive (which is formatted in ext2 format) with directory permission drwxrwxrwx and file permission as -rw-rw-rw.
View 3 Replies
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
Running Debian Squeeze, I used gparted to wipe the fat partition on a 8GB USB thumbdrive, and repartitioned it with ext3. Everything goes fine, and gparted and fdisk -l both show the correct partition, but I can't seem to mount it, and automount in gnome fails as well.code...
View 5 Replies View RelatedI have 250 GB HDD, 150 GB has CentOS installed,I have formatted the rest 100 GB in vfat, mounted on /data/ folder, now the issue is only root have the write permission on that folder, i have tried all the commands, however i have reformatted it with ext3 and now issue is resolved, i just want to know that why it is not possible to set the permissin to everyone +w on vfat partition.
View 1 Replies View RelatedIs it possible, using Ubuntu 9.04, to mount a USB HDD that's been formatted on a Mac (HFS+?)
View 5 Replies View Relatedso i used to have my harddrive mounted in fstab, to /mnt/diskS. than i decided to change the permissions to 766 global i believe i read somewhere with chmod. anyways so after that i checked to see if it worked and to my dis believe all my files are gone. or just arnt showing, the space taken up hasnt decreased but i just cant see any of my files. so i decided to take the harddrive out of fstab and restart my computer. and after restart when i click on the folder the harddrive is mounted in it says permissions belong to 1000?
View 1 Replies View RelatedI have a question, i accidentally formatted an lvm volume as ext2 after creating it. Then of course, we copied a ton of data to it before I realized it was ext2. (I guess ext2 was the default when using mkfs without a -t) Anyway - can I just use tune2fs -j on the LVM just like I would a /dev/sdx device?
View 2 Replies View RelatedI accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I'm unable to format a new drive. I've tried commands, which complete without error, yet the drive is still listed as NTFS.
===========Ive tried the following
[root@server ~]# mke2fs -j -m1 /dev/sdb1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
[Code]....
I have a SAN drive space connected to a SLES 10 (OES2) server. The server sees the drive at /dev/sdb1, and I was able to use fdisk to create a partition on it. I created a new directory /mnt/testvol, where I would like to mount the SAN drive to.
Fdisk shows the volume to be at /dev/sdb1 and lists it as Linux filesystem.
I used this command to try to mount it:
mount /dev/sdb1 /mnt/testvol -t nfs
and I get this error:
mount: directory to mount not in host:dir format
I have openSUSE 11.2 installed on my PC, the install went well and was quite pleased with the OS. Howeve, because I only had a small 40Gb hard-drive I decided to buy a new Western Digital Green 1Tb SATA drive for storing my music etc.Now this is where I have run into difficulty. I can't get the OS to see the new drive, I did a search and found some instructions on how to format, mount, setup the 2nd drive but I either missed something or I just didn't do it correctly.In the end I could see the drive under Nautilus and that was it.
I can't write to it because it says I don't have permission? I can't seem to make new directories, most likely because I don't have permission. If needs be I will be willing to go back to the beginning and start installing the drive again. I don't mean to beliitle the Linux OS and users but using Windows$ all my life (I'm 49) I find it a lot easier, but I am willing to learn this new OS (for me that is).
I just got a Patriot PS-100 mlc ssd drive and I cant mount it or put a file system on it. I've installed Gentoo on many normal hdds before and though it would be the same with the sdd.
I'm trying:
mkfs.xfs /dev/sda2
cannot open /dev/sda2 device is busy.
I've set up a RAID-1 array /dev/md0 consisting of two partitions /dev/sda5 and /dev/sdb5.The partition /dev/sda5 was formatted "ext2" before mirroring, but now when I "mount -v /dev/md0 /mnt", it says "/dev/md0 on /mnt type ext3 (rw)".Why is the type changed from "ext2" to "ext3" ?
View 2 Replies View RelatedI have USB which is already not recognised windows and when I insert while ubuntu is on. It does recognise it. But does not allow me to mount, no matter through command line, or won't let me format it through disk utility.
~ When I do `sudo fdisk -l` .. there is no entry of my USB..
~ BUT, when I do `sudo lsusb`.. I have results as follow..
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:0736 Microsoft Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 058f:1234 Alcor Micro Corp. Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The entry with Microsoft Corp. name is my Microsoft SideWinder mouse and second last I assume is my USB, as I have no other active USB connections.
I am very new to Linux ubuntu got it because friend said it way better than windows. The problem I am having is with my thumb drives. I cannot get them to work. It says I am unable to mount. The only way to get one to work is put one in wait tell it says it is unable to mount then put the second one in. At that point I am able to look at the second drive.
View 2 Replies View RelatedI've installed Ubuntu Server, and Webmin following this guide, and all is well so far... I've mounted some drives with some pre-existing data on them, and can view the data on those drives. But I have one drive that I can't seem to mount, and I'm pretty sure there's data on it. But I can't seem to find how to identify what format the data is in, ie.. ntfs, ext2, ext 3, etc. Its likely pretty simple, but how can you identify the drive format before you attempt to mount it?
View 2 Replies View RelatedI recently got a new external hdd and formatted it to clear off the preloaded software seagate loaded on it for windows users. Anyway it worked fine but I realized I didn't name the drive what I wanted and since the format didn't take long at all I figured I'd do it again and name it what i meant to.
This time a message popped up and said error formatting drive
I removed it and now when I connect it, it doesn't appear to mount at all.
I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.
View 3 Replies View RelatedI plugged in a seagate expansion drive 1Tb into my linux server for backup purposes but it is unable to mount it. I can see the expansion drive in My computer but when I click on it, it says unable to mount, device already mounted or busy. Windows can read the hard disk with no problems. It is ntfs formatted. I installed ntfs kernel and fuse. Ntfs is displayed when I run cat /proc/filesystems. However it just can't mount the expansion drive.
View 7 Replies View RelatedWanted to image my mom computer. Her computer is windows 7 and has ntfs. So... how do I mount it?
Below is what I did.
Code:
My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive.When I plug the disk in, I see the following in dmesg:[269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20[269259.604674] usb 1-2.2: configuration #1 chosen from 1 choiceHowever it does not mount in GNOME and I don't see it when I type:sudo fdisk -lAny suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.
View 4 Replies View RelatedI'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
I installed Ubuntu 10.10 in a Sony Booknote (old one) everything works but the Floppy. Just for a couple application I need the floppy drove to work. I have try couple things but still not working. I can see the floppy (in Computer) and it runs/spins the media but it does not mount it.... I can't write or read form it.
View 2 Replies View RelatedI have a 1TB hard drive which is formatted with FAT32. Attempting to make a new partition I clicked the format drive button in Disc Utility. I chose Master Boot Record and something was written to the drive. So now I can't mount the drive and Disc Utility says that there aren't any partitions. I don't think this can be true because I had 200 GB of data on the drive and it would have taken longer to delete all that. At least I think...
View 7 Replies View RelatedI have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies View RelatedI need some assistance in trying to format a USB hard drive to vfat format but can't seem to do so. I am currently using RHEL 5.3. I have tried the following commands and they all come back as "command not found"
mke2fs vfat /dev/sc1
fdisk vfat /dev/sdc1
mkfs.vfat /dev/sdc1
What am I doing incorrectly?? Can someone please point me in the right direction??
I have the following /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code]....
This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.
Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.
View 4 Replies View RelatedNot able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I am trying to install a harddisk, which is already formatted as ext3, into my Qnap NAS box. The web interface of the NAS box shows, that the harddrive has been detected, but I am not able to mount any of its partitions.This is the output from fdisk -l:
Code:
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[code].....
