Debian :: Install Does Not "see" Formated Ext2 Partition?
Mar 15, 2011
I have already set up, with disc partitioning software (Acronis) , a ext2 partition and a swap space. I have two hard disc drives arranged in a raid 0.
When I try the Debian network install, I am asked to create a partition. The only option that I am given is to partition the whole disc. I most certainly do not want to do this because of all of the information and programs that I have on the other partitions.
I remember from the past that we used to use "Fdisk" to manually partition drives. I was not able to invoke it.
So, the basic question is, how do I direct the install to a partition that is already formatted?
View 3 Replies
ADVERTISEMENT
Feb 18, 2011
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies
View Related
Jan 13, 2011
I need to know when I have bought a notebook. I know I have formatted disk myself and partition created and Ubuntu installed.Is there any way I can get info when I bought a notebook? Like time of disk formatting, partitions created, Ubuntu installed
View 2 Replies
View Related
Oct 18, 2010
After I formated my windows partition using GParted it became Unallocated and moved under Extended partitions. I can't create the unallocated partition as primary one, or drag it out of the extended ones. I tried GParted live CD also, but nothing worked.
View 7 Replies
View Related
Oct 2, 2009
I had an Ubuntu desktop 9.04. While I wanted to format my second hard drive with gparted, I have selected my system HD () with all my datas (/home, ...).In fact, my error is I have selected to rebuild my partition table and now I have lost all partitions . I would like to know how to restore my datas.
View 4 Replies
View Related
May 27, 2010
i TOTALLY ****ed up my windows bootmgr, and, in some way, the linux partition too. I'd like to format the windows partition, but as all my info stays intact I'd like to conserve it that way. The only way I can think of, is to make a new ext2 partition on the same HDD y have windows ( I only have one HDD, so... ) and save the information there . Wich is the correct way to do so, without losing all my software and/or information??
Other details:
* Rright now, i don't have ubuntu installed on my pc ( I'm using a live cd ).
* I'm using ( or was ) win 7.
* The only partitions on my HDD is an ntfs ( 60 GB ) and an unallocated ( 240 GB )
View 4 Replies
View Related
Oct 31, 2009
I had to install a new disk drive in my PC a week ago because the old drive died. The new drive is a 160 gig drive. First I installed Win XP with S/P 3 and everything was fine. Then I installed Ubuntu 8.04 and the troubles began. Ubuntu resized the Windows partition down to 8.81 gig and used the other 137.44 gig for Ubuntu. When I booted into Windows I started getting nasty little messages about "not enough disk space". SOOoooo....... I booted using the Ubuntu install CD and ran "sudo gparted" in a terminal window. I tried to resize the ext2 partition but got an unknown error.
Then I ran fixmbr in Windows to get rid of grub. Then I tried running gparted again to delete the ext2 partition. Got an error that said "can't delete the partition because it's mounted". So I tried to unmount the partition but got a message that the command "unmount" could not be found. After that I installed Partition Magic in Windows and tried that. It sees the ext2 partition but says it's unsupported when I try to delete or resize it.
I ran fdisk but it doesn't see the Linux partitions either, so I can't delete them in that program. I finally tried to format the disk but now I have a 9 gig drive with nothing on it. How do I get those Linux partitions off the drive so I will have a 160 gig drive that I can start over with? I've spent 6 days this week reinstalling XP and all of my programs, and now everything is gone because Ubuntu decided to be a disk hog.
View 4 Replies
View Related
May 3, 2010
I was installing windows vista on my computer, so I backed up everything to a external drive which was formatted with ext2. I then proceeded to install windows vista. When I got to the partition section I tried installing windows vista to my raid 0. When it didn't work I decided that I would delete all my existing partitions and create a new one. Well in my haste I accidentally deleted my ext2 partition from my backup drive that was still connected. As soon as I realized what I had done I shutdown the windows install and disconnected my external drive. This is the current state of my drive from parted:
Model: WD 15EADS External (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
I know that the drive only had one partition before and that it took up the entire disk and it was ext2 (maybe ext3).
View 3 Replies
View Related
Aug 11, 2009
This might be a longshot but i used to use the 4 bay NAS here Which formated the HDD JBOD array to EXT2 , Anyway i want to move to an 8 bay DAS now but i cant find an application to convert the partitions .
Partition magic says the partitions are unformatted and the partition id is set to linux raid auto . Is there any way to convert this partition to vanilla EXT2 so i can use partition magic on it ? Its a 4TB array so copying isnt possible.
View 1 Replies
View Related
Oct 31, 2010
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
View 1 Replies
View Related
Mar 18, 2011
Since Mac OS X, runs a BSD Linux at the core I think that this is the correct place to ask about this, but I need cfdisk to make some ext2 and swap partitions on some Compact Flash and old HDs without needing to download any LiveCD. There is any cfdisk that I can use on my Mac?
View 2 Replies
View Related
Oct 3, 2010
I would like to know if it is normal to experience 10MB/s data transfer rates during copying between partitions on my local hard drives (Toshiba 250GB 5400rpm SATA) while having three times faster (30MB/s) transfer rates between local partitions and USB drives (Kingston 8GB).
View 2 Replies
View Related
Aug 26, 2010
i m not able to copy a file over 16 gigs on an EXT2 or EXT3 partition. Is there a way to do this. I even tried to split my iso file too. I splitted my iso file in 4 files then copy them on the ext2 or ext3 partition. But as soon as I was trying to join the files together it never went over 16 gigs. Actually it stops at 16,843,020 kb exactly. is there a limit for those partitions or is there an another way to see my 20gigs iso file in one piece?
View 1 Replies
View Related
Oct 25, 2009
I need to mount my ext2 partition with write permissions for an average user. Right now, I can only write to the volume using sudo or the root account.
/etc/fstab:
Code:
# Filesystem: Mountpoint: Type: Options: Dump: FSCK:
/dev/sda1 / ext4 defaults 1 1
/dev/sda5 swap swap defaults 0 0
[code]....
can't add the options uid=500,gid=500 to the ext2 volume because it says "bad option" I have 1 question. If you have a volume listed in /etc/fstab, and you try to mount it with different options than the ones listed in fstab, will it mount with the new options, or the fstab options?(e.x. if I try to mount /dev/sda6 with: mount-o auto,user,exec,rw,async. Will it mount with async or sync?)
View 1 Replies
View Related
Nov 19, 2010
I had a 40G vfat drive from WIN98 and I used parted to remove the partition, then create a new partition with an ext2 filetype When in parted, and do print...
Code:
(parted) p
Model: ATA QUANTUM FIREBALL (scsi)
Disk /dev/sdd: 40.0GB
Sector size (logical/physical): 512B/512B
[code]....
View 7 Replies
View Related
Nov 3, 2009
I work with a Debian Squeeze on my laptop and I have a 160GB external hard disk. My hard disk was formatted FAT32, but I decided to format it using ext2. I formatted it using fdisk from command line and everything went well. Unfortunately, when I mount my hard drive(which is auto-mounted from Debian) it has got root both as owner and group. Then I can't write to it because I have no permission to do that. Is there a setting to create an ext2 partition which has as owner the logged system user in order to have right permission every time.
View 7 Replies
View Related
May 18, 2009
I have recently bought a Toshiba 1TB external USB disk.
I have formatted it using gparted to ext2 and Debian see's it but gives me an error "unable to mount volume" with some extra stuff about programs shouldn't disconnect shared drives.
I can mount it ok by creating a folder called usbdisk and the mount command "mount -t ext2 /dev/sda1 /home/mike/usbdisk" and it works fine, but I have to do this everytime I start the machine.
Does anyone know what exactly I should put into a setup file to make the machine do this everytime , but only if its there.
As I'm not very clued up on bash scripting , I'm assuming it something along these lines:
How would I add this at boot?? Would I add it to the end of "init.d/rc" ?
View 1 Replies
View Related
Jun 29, 2011
I've set up a RAID-1 array /dev/md0 consisting of two partitions /dev/sda5 and /dev/sdb5.The partition /dev/sda5 was formatted "ext2" before mirroring, but now when I "mount -v /dev/md0 /mnt", it says "/dev/md0 on /mnt type ext3 (rw)".Why is the type changed from "ext2" to "ext3" ?
View 2 Replies
View Related
Feb 10, 2011
create lenny usb-hdd live and would like to have ext2 on the usb stick.I changed in config/binary to ext2:LH_BINARY_FILESYSTEM="ext2"but get this problem:# lh_clean # lh_build W: You have selected values of LH_BOOTLOADER and LH_BINARY_FILESYSTEM which are incompatible - syslinux only supports FAT filesystems.
P: Setting up cleanup function
View 7 Replies
View Related
Jan 24, 2011
How to convert all ext3 partitions to ext2 on a existing Lenny without damage a system?
Code:
View 2 Replies
View Related
Oct 5, 2010
I'm stuck trying to install f13 on my trusty old eeepc 701 4g. It has a 4GB SSD and 32GB of usb flash memory. The plan is to replicate how I had f9 installed: / and /boot on the ssd with /usr/share and some /home/<user> data directories on the usb flash. I had a hacked f9 kernel that supported persistent usb, allowing me to suspend to ram with this arrangement. It looks like that's now built into the stock kernel. he problem I have is that the Live CD image (I've tried the stock Fedora and the XFCE spin) can't deal with installing to ext2 (only 3 and 4) and the boot.iso image flatly ignores the "lowres" and resolution=800x480" options. I can work my way through the first few screens blind, but can't deal with repartitioning.I'm sure this is a Standard Problem, but I haven't hot on the magic google search to find it all afternoon
View 1 Replies
View Related
Jul 7, 2010
I wanted formated output of all the files under a particular directory. I am trying to use find.Something like find -P ./ -type f -name '*.cpp' -printf "%p "I want all the files with specific extension like .c .cpp .h to be printed out separated by space. One more thing i want is absolute path names instead of relative.
View 5 Replies
View Related
Jan 19, 2010
During the file system check of an ext3 partition at boot I get the following output:
The super-block could not be read or does not describe a correct ext2 filesystem. If the device is still valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate super-block:
I'm then forced to login in as root and given the following prompt:
I'm reluctant to do as advised by the output and run e2fsck -b because it is not an ext2 filesystem.
Although I can still enter runlevel 5, it doesn't seem to recognise mouse and keyboard input in KDE so my system is effectively redundant at the mo. For this reason any short term workarounds are welcome, but a fix is needed. This problem is part of a longer saga to do with recovering a Windows Vista installation which started failing to boot. I have used both Vista and SUSE tools to try and recover my bootloader to no avail, and this has been the result. If more detail about this is needed please ask and I can explain what I have done.
View 9 Replies
View Related
Apr 21, 2010
I killed Win XP awhile back, but there are a couple games I need to format for Ubuntu to use, using XP to get there.
I have Ubuntu LTR. I formatted disk to install XP. I installed XP. I can't boot into Ubuntu anymore unless from a live CD. From Live CD, I can see my Ubuntu is still there, but from XP, disk manager it shows that space as empty (free). How can I dual boot, now? Please don't tell me I need to reinstall Ubuntu, I may cry. Any help is appreciated and my apologies if my search didn't get me the answers, the other similar problems I saw were in reverse order (Linux onto drive after XP).
View 9 Replies
View Related
Jun 14, 2010
I have a NAS from WD that runs some stripped down flavor of linux. The NAS has one USB port at the back which can be used to expand the storage. If I plug in an external disk formated in either NTFS or HFS+ then the system automatically mounts the disk and shares it over samba. If I plug in a disk that is formated in ext3, the disk is recognized but that's about it. It doesn't mount or get shared or anything. I have tried asking WD about this and I have tried asking google. But after two days of searching I am turning here for some more expert advice.
Here is what I've managed to figure out so far.
If I check dmesg before and after plugging in the ext3 usb disk I have found out that these lines are added to the log:
Code:
I have tried googleing those last two lines but I haven't found any info that I can make any sense of.
If I run the command "mount -a" I get the following messages from the shell: "mount: Cannot read /etc/fstab: No such file or directory"
Hover I am able to mount the ext3 disk manually. First I get this info from fdisk
Code:
And then I run these two commands:
Code:
This makes the usb disk visible in the shell, but since this is a NAS, it is kinda useless as long as it doesn't show up in samba.
Since I'm pretty new to linux I don't know what to try next so I'm hoping for some advice as to what I can do to make the ext3 usb disk automount.
View 6 Replies
View Related
Jan 19, 2011
I've installed Debian Lenny from USB with the small 8MB netboot image. I only chose "Standard system" in Tasksel during install, to get a clean, minimal install. I also chose for LVM and a separate partition for /home. I have one 1.5TB SATA drive in this machine.
Now everything seems to install just fine, but when I reboot I get the following error:
fsck.ext2: No such file or directory while trying to open /dev/sdb1
I get offered to enter a maintenance shell, or press CTRL-D to resume booting. When I do, the system boots fine and nothing seems wrong. But it is inconvenient, because I can't reboot the machine without physically going to it to press CTRL-D on the keyboard
I have googled for this error and it is mentioned on several forums, but they were all related to other things specific to their installs/machines.
(ps. the only slightly strange thing during install is that the Debian installer included my 1GB USB thumbdrive when it shows all the drives and the partitions before formatting. I removed the USB thumbdrive directly after install, but if I plug it in, I still get the error)
These are the errors during boot:
code....
I've only installed Debian on my laptops, which never had any problems.
View 2 Replies
View Related
May 27, 2011
I installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
View 4 Replies
View Related
May 2, 2015
I'm trying to install Debian on a USB to create an encrypted partition, I get an error message saying I need to install missing firmware rtl_nic rtl8168d-2.fw.So I download that file and try again this time I get an error " There was a problem reading data from CD Rom" .I not using a CD Rom I put debian on the USB as an ISO file first using Unebutin then tried Rufus.
View 12 Replies
View Related
Apr 11, 2011
My attempts to "dist-upgrade" Lenny to Squeeze ended in disaster. My story is that it was caused by a bug in the "release notes instructions".
Anyone, who wants all the gory details, can find them by visiting
619521@bugs.debian.org.
I would now like to reformat the HD-partition that currently contains the failed "upgrade" and see if I do any better by starting from scratch; it is about 6 years since I have last undertaken such a task and my memories are hazy.
The relevant entry in the Debian (Install) Manual reads:
6.3.2.3. Manual Partitioning
A similar screen to the one shown just above will be displayed if you choose
manual partitioning except that your existing partition table will be shown and **without the mount points**.
My question is:
At what point in the "clean install" does the Debian Installer (set at "medium"?) ask for the "mount point" at which the "root directory of Squeeze" is to be installed?
View 5 Replies
View Related
Mar 10, 2013
I have tried to install Debian from various .iso files over the last couple of days. However, the installations always get stuck on "Partition disks" section. On the screen, the progress bar for "Starting up the partitioner" keep getting stuck at 50%, and refuses to progress further. I understand that it might take a little time to scan the hard drive, so as an experiment, I left it on over night. However, it is still stuck there when I woke up 6 hours later.
View 8 Replies
View Related
