General :: Can't Delete The EXT2 Partition
Oct 31, 2009
I had to install a new disk drive in my PC a week ago because the old drive died. The new drive is a 160 gig drive. First I installed Win XP with S/P 3 and everything was fine. Then I installed Ubuntu 8.04 and the troubles began. Ubuntu resized the Windows partition down to 8.81 gig and used the other 137.44 gig for Ubuntu. When I booted into Windows I started getting nasty little messages about "not enough disk space". SOOoooo....... I booted using the Ubuntu install CD and ran "sudo gparted" in a terminal window. I tried to resize the ext2 partition but got an unknown error.
Then I ran fixmbr in Windows to get rid of grub. Then I tried running gparted again to delete the ext2 partition. Got an error that said "can't delete the partition because it's mounted". So I tried to unmount the partition but got a message that the command "unmount" could not be found. After that I installed Partition Magic in Windows and tried that. It sees the ext2 partition but says it's unsupported when I try to delete or resize it.
I ran fdisk but it doesn't see the Linux partitions either, so I can't delete them in that program. I finally tried to format the disk but now I have a 9 gig drive with nothing on it. How do I get those Linux partitions off the drive so I will have a 160 gig drive that I can start over with? I've spent 6 days this week reinstalling XP and all of my programs, and now everything is gone because Ubuntu decided to be a disk hog.
View 4 Replies
ADVERTISEMENT
Oct 2, 2009
I had an Ubuntu desktop 9.04. While I wanted to format my second hard drive with gparted, I have selected my system HD () with all my datas (/home, ...).In fact, my error is I have selected to rebuild my partition table and now I have lost all partitions . I would like to know how to restore my datas.
View 4 Replies
View Related
May 3, 2010
I was installing windows vista on my computer, so I backed up everything to a external drive which was formatted with ext2. I then proceeded to install windows vista. When I got to the partition section I tried installing windows vista to my raid 0. When it didn't work I decided that I would delete all my existing partitions and create a new one. Well in my haste I accidentally deleted my ext2 partition from my backup drive that was still connected. As soon as I realized what I had done I shutdown the windows install and disconnected my external drive. This is the current state of my drive from parted:
Model: WD 15EADS External (scsi)
Disk /dev/sdb: 1500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
I know that the drive only had one partition before and that it took up the entire disk and it was ext2 (maybe ext3).
View 3 Replies
View Related
Aug 11, 2009
This might be a longshot but i used to use the 4 bay NAS here Which formated the HDD JBOD array to EXT2 , Anyway i want to move to an 8 bay DAS now but i cant find an application to convert the partitions .
Partition magic says the partitions are unformatted and the partition id is set to linux raid auto . Is there any way to convert this partition to vanilla EXT2 so i can use partition magic on it ? Its a 4TB array so copying isnt possible.
View 1 Replies
View Related
Aug 26, 2010
i m not able to copy a file over 16 gigs on an EXT2 or EXT3 partition. Is there a way to do this. I even tried to split my iso file too. I splitted my iso file in 4 files then copy them on the ext2 or ext3 partition. But as soon as I was trying to join the files together it never went over 16 gigs. Actually it stops at 16,843,020 kb exactly. is there a limit for those partitions or is there an another way to see my 20gigs iso file in one piece?
View 1 Replies
View Related
Oct 25, 2009
I need to mount my ext2 partition with write permissions for an average user. Right now, I can only write to the volume using sudo or the root account.
/etc/fstab:
Code:
# Filesystem: Mountpoint: Type: Options: Dump: FSCK:
/dev/sda1 / ext4 defaults 1 1
/dev/sda5 swap swap defaults 0 0
[code]....
can't add the options uid=500,gid=500 to the ext2 volume because it says "bad option" I have 1 question. If you have a volume listed in /etc/fstab, and you try to mount it with different options than the ones listed in fstab, will it mount with the new options, or the fstab options?(e.x. if I try to mount /dev/sda6 with: mount-o auto,user,exec,rw,async. Will it mount with async or sync?)
View 1 Replies
View Related
Nov 3, 2009
I work with a Debian Squeeze on my laptop and I have a 160GB external hard disk. My hard disk was formatted FAT32, but I decided to format it using ext2. I formatted it using fdisk from command line and everything went well. Unfortunately, when I mount my hard drive(which is auto-mounted from Debian) it has got root both as owner and group. Then I can't write to it because I have no permission to do that. Is there a setting to create an ext2 partition which has as owner the logged system user in order to have right permission every time.
View 7 Replies
View Related
Nov 1, 2010
Directories(-entries) are in a EXT2 file system
managed in a singly linked list.
Delete files in the directory causes Gaps or holes to appear in
the linked list of the directory.How does a C-source code look like,
which would reorganize this list and remove the gaps or Holes.
View 5 Replies
View Related
May 27, 2010
i TOTALLY ****ed up my windows bootmgr, and, in some way, the linux partition too. I'd like to format the windows partition, but as all my info stays intact I'd like to conserve it that way. The only way I can think of, is to make a new ext2 partition on the same HDD y have windows ( I only have one HDD, so... ) and save the information there . Wich is the correct way to do so, without losing all my software and/or information??
Other details:
* Rright now, i don't have ubuntu installed on my pc ( I'm using a live cd ).
* I'm using ( or was ) win 7.
* The only partitions on my HDD is an ntfs ( 60 GB ) and an unallocated ( 240 GB )
View 4 Replies
View Related
Oct 31, 2010
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
View 1 Replies
View Related
Mar 18, 2011
Since Mac OS X, runs a BSD Linux at the core I think that this is the correct place to ask about this, but I need cfdisk to make some ext2 and swap partitions on some Compact Flash and old HDs without needing to download any LiveCD. There is any cfdisk that I can use on my Mac?
View 2 Replies
View Related
Oct 3, 2010
I would like to know if it is normal to experience 10MB/s data transfer rates during copying between partitions on my local hard drives (Toshiba 250GB 5400rpm SATA) while having three times faster (30MB/s) transfer rates between local partitions and USB drives (Kingston 8GB).
View 2 Replies
View Related
Feb 18, 2011
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies
View Related
Nov 19, 2010
I had a 40G vfat drive from WIN98 and I used parted to remove the partition, then create a new partition with an ext2 filetype When in parted, and do print...
Code:
(parted) p
Model: ATA QUANTUM FIREBALL (scsi)
Disk /dev/sdd: 40.0GB
Sector size (logical/physical): 512B/512B
[code]....
View 7 Replies
View Related
Aug 27, 2010
I'm running Win 7 and installed pcLinux as a dual boot. I uninstalled linux to change disks but the partition still shows in the windows disk manager taking up space I need for windows programs. I have installed linux on another disk but cannot delete the partition on the windows disk.
View 2 Replies
View Related
Sep 29, 2009
I have two distros and windows installed. I only want one distro (I have decided on Ubuntu) and windows. But, the other distro, the one that I want to eradicate is the last one installed and it is its GRUB in the MBR.
I know what happens from experience if I just delete that partition with a liveCD - GRUB won't boot anything on reboot.
What do I need to do from within Ubuntu or the other Linux before deleting the partition of the second distro so that I have a working GRUB when I reboot ?
View 2 Replies
View Related
Feb 23, 2011
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
View 9 Replies
View Related
Aug 18, 2011
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
View 9 Replies
View Related
Jul 24, 2010
I want to wipe out my Windows partition and reinstall due to sluggishness. I plan to use Windows instructions as if it was on a hard drive by itself. Will this affect the multi-boot capability or the Linux partition in any way? Would it be easier to reformat and partition the entire hard drive and re-install both OSes? I use OpenSuse 11.2 and Windows XP.
View 6 Replies
View Related
Jun 29, 2011
I've set up a RAID-1 array /dev/md0 consisting of two partitions /dev/sda5 and /dev/sdb5.The partition /dev/sda5 was formatted "ext2" before mirroring, but now when I "mount -v /dev/md0 /mnt", it says "/dev/md0 on /mnt type ext3 (rw)".Why is the type changed from "ext2" to "ext3" ?
View 2 Replies
View Related
Mar 15, 2011
I have already set up, with disc partitioning software (Acronis) , a ext2 partition and a swap space. I have two hard disc drives arranged in a raid 0.
When I try the Debian network install, I am asked to create a partition. The only option that I am given is to partition the whole disc. I most certainly do not want to do this because of all of the information and programs that I have on the other partitions.
I remember from the past that we used to use "Fdisk" to manually partition drives. I was not able to invoke it.
So, the basic question is, how do I direct the install to a partition that is already formatted?
View 3 Replies
View Related
Mar 28, 2011
I would like to convert my /tmp and /boot partitions from Ext3 to Ext2 on my Arch Linux setup. I don't see any use in having journaling for either partition. I want to make sure that I have the right steps lined up so could someone verify that this is correct (from a live cd):
Code:
#sudo tune2fs -O ^has_journal /dev/sda7
#sudo e2fsck /dev/sda7
#sudo tune2fs -O ^has_journal /dev/sda5
#sudo e2fsck /dev/sda5
I then edit /etc/fstab to reflect these changes (ext3 to ext2 for both lines)
Does it matter what order I do it in (/dev/sda7 is /tmp and /dev/sda5 is /boot).
View 3 Replies
View Related
Apr 22, 2011
We are running debian off of an SD card and want to know what's best for /var?
- Plenty of room on 2GB SD card, so do we, make /var as large as possible (everything else is read only) to reduce block overwrites, or do we make /var as small as possible, hopefully reducing the load 'pdflush' places on the 200 Mhz system?
That said, why not ext2? Is there damage that can happen in /var due to insta-crash or power loss that will prevent proper system function? We heard ext4 is more optimized, but ext4 on 2.6.29, not sure.
If we must use a journaled file system for /var, then which is lowest load on system, or "better": jfs, ext3, jffs2 ...
View 1 Replies
View Related
Jan 26, 2011
I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.
View 3 Replies
View Related
Mar 10, 2010
What is attribute?
How list the attributes?
What is the diff b/w ext2 and ext3?
What is the types of files?
What is the drived files?
View 3 Replies
View Related
Oct 28, 2009
I have ext3 partition mounted on /mnt/shared/ as follows
Code:
Permissions above are of the actual mounted fs.
Goal is to have all files created on the fs
1) to belong to group 'users'
2) to have this groups permissions set to rw (rwx for directories) so that all users who belong to group 'users' have full read/write access to data and everyone else to have only read access.
Now because of setgid bit (s) in group permissions every file created has group 'users' and additionally setgid bit is set for directories. Because every users umask by default (on my system) is set to 0022 all created files will have permissions 644 for ordinary files and 755 for directories.
Net result of above means that users A and B who both belong to group 'users' won't be able to modify files created by the other.
So how can I make files created on the fs to be created always with umask 0002 WITHOUT changing default umask for users that is used elsewhere (like in their home directory) ?
View 1 Replies
View Related
May 2, 2010
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
View 5 Replies
View Related
Sep 5, 2009
I have a 750GB SATA drive. It has a 537GB Unrecognized partition (Palimpsest and LVM say it's FAT16), and the rest of the space on the drive (213GB) is unallocated.Windows cannot delete the unrecognized partition, nor install to it. It just spits out a generic error. I get a more verbose error when I try to delete the unrecognized partition from a Fedora live CD:Quote:
org.freedesktop.DeviceKit.Disks.Error.Failed: Error erasing: helper exited with exit code 1: In part_del_partition: device_file=/dev/sda, offset=1048576
Entering MS-DOS parser (offset=0, size=750156374016)
[code]...
View 2 Replies
View Related
Jan 3, 2010
Ive got two partitions of xubuntu installed and I only want one. Is there I way I can just delete the one i dont want and use that extra space for the other?
also, how would i know which is which when deleting?
View 9 Replies
View Related
Apr 27, 2010
I am trying to actually wipe my entire hard drive and figured it may just be easiest to format the hard drive and deleting the partitions. So when I go to System => Administration => Disk Utility => Select the Hard Drive => Click Delete Partition => And I get the error shown in my screenshots. What would be my best way to delete this partition and remove ubuntu completely for the time being. And yes I am using the latest RC. 10.04. However I don't suspect this is a bug.
View 7 Replies
View Related
