i'm trying to get a bind server up and running on my opensuse installation but I'm having some slight problems, I've been looking for a solution to what is probably a silly problem for quite a while so I decided to come here.
[Code]...
I just download OpenSUSE 11.2 x86-64 distro. I installed it. No problem.
I run bind but i cannot start named. Other server services were running well.(dhcp, squid, apache2....)
I cannot start bind only.
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
I am running vsftp on one of my systems and when trying to connect to it it errors out with this: vendion@Loki:~> ftp 192.168.1.100 Connected to 192.168.1.100. 500 OOPS: could not bind listening IPv6 socket
I have tried stopping the firewall and even disabling IPv6 nothing changed, any clues as to what is going on?
I'm thinking about installing a DNS server on Fedora 13 running bind. I looked around for available bind packages and found only these:
Now the first one contains bind utils the second one is for running DNS in a chroot env and the last one is a bind with some DB backend.
Does this mean that fedora 13 doesn't support/.provide "standard" bind server (I mean the one to run without chroot/without db backend) ? Or am I missing anything in my repolist which is :
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies View RelatedI've been working on getting NoMachine and FreeNX working together ... and they're both working well, listening on different ports (guess I should write a howto). At some point I decided to write an init script to control FreeNX behaviour (start, stop, status, setup), since the Ubuntu version has one (called freenx-server) and openSUSE doesn't, but I noticed that it was not necessary, as FreeNX got started automatically... but how ? I could not find any init.d script or command which would start the FreeNX server. Indeed it wasn't actually running :
Code:
neelix:~ # /usr/bin/nxserver --status
NX> 100 NXSERVER - Version 3.2.0-73 OS (GPL, using backend: 3.2.0)
[code]....
It it possible to setup a bind server for my internal network at home? Currently, all clients DNS requests go to my Verizon FIOS router, which also acts as a DHCP server. I would like to setup a another DNS server using BIND for studing.
Current setup:
Client --> Router (DNS Server) --> Internet
New BIND server setup:
Client --> BIND Server (2nd DNS) --> Router (Primary DNS) --> Internet
How would I go ab this? Would I have to configure a cache naming DNS server?
Trying to add some rules to fail2ban list for bind dns. How to enable logging in /etc/named.conf file, that errors will show in /var/log directoy?
View 1 Replies View RelatedI have a QMgr running on a SUSE 11.1 - I start my runmqlsr under qmgr control on 1414. After a few minutes the listener dies saying that it can't bind to port. I did a netstat -a and I see no service on 1414. I did an lsof | grep 1414 and found nothing. what am I missing here?
View 4 Replies View Relatedwhat is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedToday I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
I created a VMware Workstation VM with OpenSUSE 11.2. When I copy the VM to a new location the network configuration disappears. If I go into the networking control panel and save, the interface names are changed. Originally had 2 nics as "eth0" and "eth1", copy the vm, configure network and the interfaces are now "eth2" and "eth3". How do I get back to my original configuration?
View 7 Replies View RelatedI'm trying to get BIND running on one of our Fedora 10 servers, since we've had some issues with the DNS from our service provider. This BIND server is not authoritative for any domain, it's merely for caching purposes. I used the sample DNS file at [URL].., and modified it slightly with our internal IP addresses.
I'm getting the following errors when I do service named start:
Error in named configuration:
zone localhost/IN: loading from master file master.localhost failed: file not found
_default/localhost/in: file not found
zone 0.0.127.in-addr.arpa/IN: loading from master file localhost.rev failed: file not found
_default/0.0.127.in-addr.arpa/in: file not found
I also tried changing the line directory "/var/named"; To the /var/named/chroot/var/named directory with the same result.
I've tried setting up BIND from a fresh install. I've followed a few tutorials (all seem to follow a similar routine), but it doesn't appear to work properly.
This is what happens when I query my domain: [URL]
This is my named.conf file:
Code:
//
// named.conf for Red Hat caching-nameserver
//
options {
directory "/var/named";
[Code].....
I've compared both files to examples and they don't appear to be any different - I'm at a loss as to what is wrong or where I should start to troubleshoot it.
I have minimal server installation suse 11.2 and i m trying to configure PPPoE through terminal windows but without any luck. I have DHCP activated on mine network card eth0. Mine gateway is mikrotik router board its working fine. I get an ip adres regular from dhcp server. Did someone do something like this.. does not have to be mikrotik as gateway just step by step configuration through terminal window cos i have minimal server installation... I dont use GUI cos its a web testing server on network
View 2 Replies View Relatedi'm running fluxbox on my xubuntu 10.10. I'm just trying to set up the key file and the keys i enter will randomly not bind. Like for example:
# open a terminal
Mod1 F1 :Exec x-terminal-emulator
# open a dialog to run programs
Mod1 F2 :Exec fbrun
# filhanterare
Mod1 F3 :Exec thunar
# textredigerare
Mod1 F4 :Exec notepad
terminal, fbrun and notepad works fine but not thunar. i've tried a million different combos of keys and modifiers and it seems totally random weather it works or not. sometimes what works one minute don't after next reconfigure.
When i run the original keys-file i get this log output:
Keys: Invalid key/modifier on line 66):
I get similar outputs when i change the keys-file for other numbers too but it doesn't seem to happen for every key that doesn't work.
We would like to use Kiwi LTSP to boot some old PCs straight in to a Windows terminal session. We have this working with RDesktop, but we would like to load balance the connections to our Citrix servers, which I don't believe you can do with RDesktop as it points to a single Windows server.
Is there a way to get LTSP to connect to published ICA applications on boot in a similar way to specifying screen07=rdesktop in lts.conf?
I always notice that xdmcp always runs on my system. I don't want it to. These are my settings and I tried to reboot. xdmcp still runs. How do I stop it once for all.
/etc/sysconfig/displaymanager
DISPLAYMANAGER="kdm"
DISPLAYMANAGER_REMOTE_ACCESS="no"
DISPLAYMANAGER_ROOT_LOGIN_REMOTE="no"
[code]....
I have installed VMWare on my laptop. Host operating system - Opensuse 11
Two virtual machines - Both of them have Opensuse 11 as Guest Operating System.
When I start both virtual machines I get the following message.
"Message from <local host name> : The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Virtual device Ethernet0 will start disconnected"
I cannot ping to another Virtual machine from one virtual machine. I get "Host Unreachable" message.
Desktop that has wireless built into motherboard worked in 11.3 (as best as I can remember, don't really use it normaly). Trying to connect to my wireless router (only one I have rights to).Wireless router is WEP with opensystem authentication, works fine for laptop (Windows)Networkmanager scans and displays local networks
Networkmanager shows:
acivating
setting network address
connection failed
[code]...
Just installed OpenSUSE 11.2 and I have to say it feels great.Only gripe I currently have is the NetworkManager that is starting up very slowly. When I have logged into KDE KNetworkManager applet says that NetworkManager is not running and hence I have no network connection. This is fixed if I start NetworkManager (as root) or just wait a couple of minutes. I have one ethernet interface only, no wireless
View 4 Replies View RelatedI want to run a Web service that performs a lengthy calculation for the customer. If I let PHP perform the calculation, the script gets killed by server timeout. So I figured out it should initiate a batch job.However, the HTTP server process cannot initiate a batch job because user wwwrun is denied access to service at. Why is that so, and is it safe to remove this denial?
View 9 Replies View RelatedI have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
Earlier I have no problems when I install opensuse. After installation the network runs and I can run online updating in yast for the system. But since a few version it doesn't work after installation and I don't know why. I think maybe the errors could happen because I have no
internet connection. Today I install 11.4 and get this message when I want to run online updates in yast.
There is an error in the repository initialization
'repo-update' [URL]
[repo-update URL]
Repository is not cached
I think this problem stars with 11.1 or 11.2.
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
Is there any way in a machine with 2 (or more) network devices to only allow 1 program to use interface1 and force all other programs to use the other?
View 4 Replies View RelatedI'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI have just installed debian-live-8.3.0-i386-lxde on my old hp530 32-bit laptop
Everything went well but every time I start my laptop I get following message which lasts for approx 1m 20s ...
Code: Select allLoading, please wait...
fsck from util-linux 2.25.2
fsck error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda1
fsck exited with status code 8
[ 13.941532] systemd-fsck[145]: DEBIAN8: clean,140919/640848 files, 978992/2560942 blocks
[ ***]A start job is running for LSB: Raise network interfaces. (1min 20s / no limit)
with the 3 asterisks above moving back and forth.
... then it boots OK into operating system. so apart from the delay everything is working ok.