Debian Installation :: Can't Open CDROM Drive While Installing VM 7.6
Oct 9, 2014
VirtualBox 4.3.14
Windows 7
Debian 7.6
I'm trying to create a new VM with Debian 7.6. I downloaded the 3 install iso discs and tried to install. When I begin the installation it seems to take control of the CDROM and I am no longer able to eject it by either pressing the eject button or trying to eject through Windows. The installation goes fine until it asks if I have any other discs to install (which I do ... I have 2 more). At this point I say "Yes" but I cannot get the CDROM to open up at all since it doesn't automatically eject for another disc and as I mentioned before ... I can't do it manually or in Windows.
- I cannot do an installation over the internet because this is a government computer which is requires to be hooked to a government network. There are certain certificates required to access the network which are not available to my newly made (or in the process of making) Linux system but rather only to my host Windows system.
- I cannot use a newer version of VirtualBox because that opens up a whole new set of issues dealing with WinVerifyTrust getting CERT_E_REVOCATION_FAILURE most likely due to our symantec security software.
So my Storage Settings in VirtualBox are as follows for my CDROM drive:
- Controller: IDE Controller
- Type: PIIX4
- "Use Host I/O Cache" is checked
- Host Drive D:
- CD/DVD Drive: IDE Secondary Master
- "Passthrough" is checked
I cannot install the Debian 7.6 OS because I cannot eject each disc and put in the next disc. The only way I can eject the disc is if I reboot my entire system (host windows system) which obviously leaves me at an unfinished point in my install and therefore I have to restart the install and end up right where I was 30 minutes earlier.
View 6 Replies
ADVERTISEMENT
Mar 21, 2011
I was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
View 5 Replies
View Related
Jun 7, 2011
I tried to install skype: apt-get install skype but I got the following error: Failed to fetch cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 DVD Binary-1 20110322-15:11]/pool/main/q/qt4-x11/libqtgui4_4.6.3-4_i386.deb Hash Sum mismatch
View 2 Replies
View Related
Feb 28, 2016
The CDROM/DVD drive in the new computer was defective. Everything is working now.
My ancient Dell desktop finally kicked the bucket but the hard drive was relatively new (less than a year old).So I replaced that old desktop with a new desktop (not Dell this time) and decided to just plug in the old hard drive - to see what happens.Well, I was pleasantly surprised when Debian booted up and executed as normal (ok then, ALMOST normal)!
The problem is that the CDROM/DVD-RW is not recognized.For example, I have an audio CD in it, but neither file managers or multimedia players can see it (where 'it' is either the CD itself or the CDROM device).
I've tried GUI applications like mplayer, kplayer, Vlc, dolphin, pcmanfm; and I've tried the command line as well (bash).Short of doing a complete reinstall of Debian, is there a way to get it to recognize this 'new' hardware?
View 0 Replies
View Related
Mar 6, 2010
just installed squeeze today, all went well but when I put a cdrom or dvd disc in it will not auto mount.. have to manually mount them from terminal. I've looked a /ect/fstab and do not see any problems there. Anyone else run into this problem on a squeeze install and fixed it?
View 3 Replies
View Related
Jan 23, 2010
So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
View 4 Replies
View Related
Mar 27, 2010
I'm having headaches about not being able to install build-essential on my 9.10. I don't have an internet connection and no CDrom. [URL]. So that solves it if you have a CD drive... What to do if a poor fella (like me) was to have a system with no CD drive? I installed from USB PENDRIVE and I suppose there have to be some command corresponding to apt-cdrom but for the USB drive but I can't find one.
View 3 Replies
View Related
Jul 11, 2010
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
View 10 Replies
View Related
May 3, 2010
I am trying to install Debian from a USB stick (which was prepared by unetbootin). The installer / kernel loads, and setup runs fine until It searches for a CD-ROM drive. My computer doesn't have a CD-ROM drive, but the net install ISO has been burned onto my USB stick. Is there some way that I can mount my USB stick as the cd-rom drive? it's of type FAT32 if it matters.
View 2 Replies
View Related
Jul 3, 2011
I wan trying to install Debain on a 4GB USB drive while running the setting something happened with my pc and i had to restart it.I try to boot from the USB drive it worked but was giving a empty cursor. the installation did not continue.i open the USB drive in my pc now but it shows just 300 MB space and lost the 3.7 GB space.I think space of USB drive with that partition, can i recover my USB drive lost partition space ?
View 4 Replies
View Related
Mar 31, 2009
I exchanged my CDROM drive for DVD drive. The DVD is recognized in the BIOS (will boot to DVD install disc) and in CentOS 5.2 (when I list the hardware), but CentOS must still think it's a CDROM drive. When I run VLC in a terminal it kicks back these errors code...
I think this means that "hdc" is linked to a CDROM configuration somewhere, but I don't know where to find it to change it (or out it). It also appears thee is no DVD module loading. (Of course, I could be making poor guesses.)
I thought there might be something in the fstab, but it doesn't appear there is anything there (for the CDROM or DVD drive)?
Is there somewhere else I should be looking? /dev/*** ?
View 4 Replies
View Related
Jan 31, 2016
I am attempting to install debian for the first time on my pc that has no cdrom drive. I downloaded the Jessie CD image and wrote it to a 4GB stick, it didnt work. Then tried the netinstall image but face the same issue.
To write the usb stick I used unetbooting first, then tried win32diskimager and finally tried DD while stick was not mounted
Code: Select alldd if=debian.iso of=/dev/sdb BS=4MB; sync
Issue is still the same: I boot from the usb and after selecting language and keyboard it fails to detect cdrom drive (no drive at all in my pc). Same behavior using normal or expert mode.
Im also unable to manually specify the drive (it looks at /cdrom and I wanted to change it to the usb stick itself or mount usb to /cdrom but I cant find my stick in /dev)
View 14 Replies
View Related
Aug 17, 2010
I have a 250 gig usb hard drive, my bios allows me to boot from it. What I would like to do is install the above 2 o/s so I can dual boot from either one.
View 1 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
May 1, 2010
My cdrom drive was working until yesterday it didn't mount at all. It said 'special device /dev/scd0 does not exist'. I went and checked in BIOS and the CD rom was not identified there as well I would like to know if there is a workaround for this problem. I am using an ACER aspire 4520 laptop with only ubuntu 9.10 on i
View 3 Replies
View Related
Jul 2, 2010
I have downloaded ubuntu studio 10.04 and burn it into a cdrom. Is there any way in installing some software packages in ubuntu studio 10.04 in my ubuntu?
View 9 Replies
View Related
May 17, 2011
I am running Fedora 14 and have a problem where I am not getting any kernel uevents for the cdrom drive.
This only happens if I do an install without the X Windows (Gnome). Also if I install CentOS 5.5 without any X Windows I do get the uevents for the cd drive.
So the problem is occuring when doing a minimal install (with Base packages and a few others) on Fedora 14.
I am running in vmware workstation 7, but I have also tried to install this without vmware on a seperate pc with the same results.
One slightly strange thing is that Fedora with X Windows detects the cd drive as VMware_IDE_CDR10 and Fedora without X Windows as CDDVDW_SH-S223L (which it really is).
I am using "udevadm monitor" to watch udev events, and "udevadm info --query=property --name=/dev/cdrom" to get the cdrom details.
View 1 Replies
View Related
Apr 26, 2011
I recently did a fresh Maverick install on my old Medion laptop (MD 42200), and a problem occurred.
The problem is that the CDROM-drive is not recognized by Ubuntu. There is no icon on the desktop when I insert a disc, and I can̈́'t find it in either /media, /cdrom or /dev.
I can see it in the standard Disc Tool program, where it is listed as being located in /dev/sr0, and it is visible in a downloaded Device Manager.
What can I do to access my CDs?
View 4 Replies
View Related
Dec 6, 2009
I running Centos 5.3 on a computer with no internet access and no cdrom, i need to know how to keep it updated via USB stick. I have a 2 Gb USB stick, i am trying to update my centos machine and also update php and mysql with the testing repo packages. I am testing vBulletin 4 Publishing Suite and vBulletin 4 requirements are: PHP: 5.2.0 and MySQL:4.1.0 but Recommended: PHP: 5.2.6 or newer AND MySQL: 5.0.19 or newer.
currently running:
PHP 5.1.6 (cli) (built: Apr 7 2009 08:00:04)
Copyright (c) 1997-2006 The PHP Group
Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies
and
mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1
edit:i am trying to follow this guide: [URL]since i have no internet access, i have downloaded all files to my USB stick.i added the testing repo manually.is there a way to instruct centos to update these packages from my usb stick ? since i have them on USB, i can upload them on centos.
View 2 Replies
View Related
Mar 1, 2011
Is there a way to permanently, completely and utterly disabling the "feature" that stops me from opening my CD drive? I suspect it is the same thing that asks me if I want to play/mount/etc things when I plug them in. I don't - I just want to be allowed to use my computer without silly hindrances and interruptions. What is it that tries to take over my computer in this way?
View 10 Replies
View Related
Mar 24, 2010
My cdrom was sort of working, but the tray was physically damaged. The usb was working without a problem.
After replacing the the cdrom drive with a similar model known to work well I could not get it to mount. I then tried to move important files to usb to try a fresh install. The usb stick flickered when I put it in, but it didn't mount. Same behaviour as the cdrom, the light goes on when I turn on the computer, but once I'm logged in I can't access the cdrom.
I have tried multiple variations of playing with fstab and trying to mount things in terminal to no avail. I just can't get Ubuntu to recognize the usb or cdrom even though their lights go on when I first try to use them.
View 4 Replies
View Related
Nov 25, 2010
I've just installed Ubuntu desktop 10.10 (32 bit). No matter what programs I run, the CD-ROM (DVD-ROM) drive is checking for a new CD/DVD every 5 seconds or so (even if no applications are running). It is quite annoying because of its robotic noise. The drive is empty. How could this be turned off? Is the media manager misconfigured by default?
View 1 Replies
View Related
Feb 4, 2011
I browsed through the forums last night for several hours looking for a solution to this and nothing specific to 10.10 came up but i tried several of the methods suggested for previous versions yet none of them seemed to help. the disk spins up when inserted but ubuntu doesn't even show that the drive exist .
View 2 Replies
View Related
Jun 12, 2010
I inserted a disc and tried to access it through Dolphin. It shows up in the directory explorer thing as a disc and with the disc name, but it has a little / thing in the bottom corner of the icon, and when I try to access it, it gives me this long error on the bottom of the file area (can't remember what all it said, something about 'harvey' and being unable to find the directory in /etc/fstab). The same thing happened with an external drive, which seemed to work fine before but now has the same problem.
View 5 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
Feb 15, 2016
I installed Open Office 4 on Debian 8 but when I run the program I get this error message.
root@localhost:/home/paul# openoffice4
No protocol specified
No protocol specified
/opt/openoffice4/program/soffice.bin X11 error: Can't open display:
Set DISPLAY environment variable, use -display option
or check permissions of your X-Server
(See "man X" resp. "man xhost" for details)
Open Office works fine when I run the command "startx" in the Konsole but so far I haven't been able to configure it.
View 3 Replies
View Related
Dec 21, 2010
I bought a new CDROM drive, as recommended by HP. It still doesn't work. I can open and close it now; so that's changed. But it still doesn't appear as a drive, and I can't use it.
Here's as best as I can describe it:
When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time.
In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer.
In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount.
If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.
View 2 Replies
View Related
Nov 9, 2010
I tried to mount my CD Rom drive and got this response: "mount: can't find cdrom in /etc/fstab or /etc/mtab"
I did see the CD Rom drive briefly after I upgraded from 10.04 to 10.10 but I couldn't access the drive and when I logged back in.
View 5 Replies
View Related
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
Aug 12, 2010
I have successfully setup a FOG server to image my Windows clients, so I have tftp, pxe and anything else related to booting to a pxe server setup and rocking. What I'm trying to do now, is use the CentOS net install files to setup CentOS on an old server with no USB boot option, and a broken scsi cdrom drive (it's a Dell PowerEdge 2400, with a single PIII 733 and 1.25GB ram).
Using the FOG Projects gparted wiki entry (adding gparted to the pxe boot menu) I was actually successfully able to pull the net install files over to the PE, and install CentOS 5.5 via local ftp server. At first it kept erroring out (I kept picking and choosing individual packages from the package groups), so I thought it may be an issue with the GUI install (the python script kept spitting back errors forcing a reboot). In any case, I finally got through the GUI install, but now I need / want to know how to force a text mode install.
[Code]....
the bolded "append" line is where I thought I could force the text mode install script, but that didn't work. The vmlinuz and initrd.img files were both pulled form the net install iso, NOT the livecd. Would that have made a difference? If not, what / where / how should I force the text mode install script?
View 4 Replies
View Related
