I browsed through the forums last night for several hours looking for a solution to this and nothing specific to 10.10 came up but i tried several of the methods suggested for previous versions yet none of them seemed to help. the disk spins up when inserted but ubuntu doesn't even show that the drive exist .
View 2 RepliesMy computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies View RelatedUsing Ubuntu 10.10, and a Aopen CD/DVD Drive, that when purchased it was suppose to read and write to everything. But my system will not recognize blank DVD-R or RW.
Everything works on the CD's writing/reading. I can play DVD movies, but thats it.
After many searches I found these posts and checked them out without any problem:
http://ubuntuforums.org/showthread.p...light=DVD+disk
DVD Writer not detecting DVD-Rs
http://www.linuxquestions.org/questi...&pp=50&page=12
I followed the Medibuntu instructions on http://www.medibuntu.org/
and that did not help either.
I purchased four different purchases of DVDs to make sure the problem was not the disks. I had that happen to me a few time with CDs.
I do not get any errors of any kind. The drive light goes on and off like it should.
I bought a new CDROM drive, as recommended by HP. It still doesn't work. I can open and close it now; so that's changed. But it still doesn't appear as a drive, and I can't use it.
Here's as best as I can describe it:
When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time.
In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer.
In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount.
If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.
I'm new to ubuntu. My kingston 4Gb pen drive doesn't recognize from ubuntu 10.04.
View 8 Replies View RelatedI have a dual boot installation of ubuntu and windows vista. After upgrading to Karmic I haven't been able to access to the CD drive. How can I use it? The following error message is displayed when I click on Places --> cdrom0:"mount: special device /dev/scd0 does not exist"I am about reinstalling the whole OS, but for that I need the CD
View 3 Replies View RelatedI've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies View Relatedhow to get linux onto an old laptop (dell inspiron 2600, 1GHZ, 120MB RAM). the cd drive doesn't recognize CD's anymore and in boot menu, "Setup Utility" the usb drives aren't recognized. the usb drive or pen drive boots in another desktop just fine. i need to somehow install xubuntu or crunchbang or something lite but must do it using net install. i see lots of tutorials but they are either too complicated or unknown source, like "inslux." and not too complicated of a process. I'm a "techie-tard," i guess. also, i'd like to suggest a new "sub-forum" in "distribution" forum, Called "General Distro."
View 9 Replies View RelatedMy K3B doesn't seem to recognise a blank CD in the drive tray.
I'm on OS 11.2, K3B & codecs from 11.2 packman, and 11.2 KDE4 factory (ie kde4.4).
When I put a blank cd in, the kde4 device notifier shows me a blank cd and offers to create a project with k3b. I create a data project & click burn, the burn dialog has a greyed out Burn button, and the media selector dropdown says please insert an empty or appendable medium.
If I eject & re-insert the disc at this point, the device notifier again tells me I've inserted a blank cd, k3b's dialog freezes for a second (seems to notice something has happened) but still does not list my cd and remains as it was before.
k3bsetup reports no problems. Burning from commandline (cdrecord) works fine. Dolphin also knows about the blank cd. I've burned to these discs before with no problems (K3B used to work quite recently, perhaps 4 or 5 weeks ago). Updates have been applied in the meantime.
My cdrom is not mounting on ubuntu 8.04. I find this message in syslog (below). How can I resolve this? code...
View 5 Replies View RelatedI'm having a problem updating the cdrom. the error i get is Failed to fetch cdrom://Ubuntu-Netbook 10.04 _Lucid Lynx_ - Release i386 (20100429.4)/dists/lucid/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs. I tried using apt-cdrom, it tells me the commands and options, which i wrote down for reference, but still that has an error which is, E: Unable to stat the mount point /media/apt/ - stat (2: No such file or directory)
W: Failed to mount '/dev/sr0' to '/media/apt/'
E: Unable to change to /media/apt/ - chdir (2: No such file or directory) Is there another code to recognize the cdrom? because the help of the command and options list didn't give a code for recognizing the cdrom. Im using ubuntu 10.4lts on my netbook and yes i do have a external rom
I exchanged my CDROM drive for DVD drive. The DVD is recognized in the BIOS (will boot to DVD install disc) and in CentOS 5.2 (when I list the hardware), but CentOS must still think it's a CDROM drive. When I run VLC in a terminal it kicks back these errors code...
I think this means that "hdc" is linked to a CDROM configuration somewhere, but I don't know where to find it to change it (or out it). It also appears thee is no DVD module loading. (Of course, I could be making poor guesses.)
I thought there might be something in the fstab, but it doesn't appear there is anything there (for the CDROM or DVD drive)?
Is there somewhere else I should be looking? /dev/*** ?
I got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
View 1 Replies View RelatedI'm trying to install Fedora 10 from a USB memory stick on which i've installed Fedora-10-x86_64-DVD.iso and, early in the process of configuring the installation, i get messages about both my IDE hard drives having unrecognizable partition tables:
"The partition table on device sda (... my disk data ...) was unreadable. To create new partitions it must be initialized, causing the loss of ALL DATA on this drive."
Same for sdb.
My PC currently runs Fedora Core 4 (yes i know i should have gotten around to upgrading my OS earlier) and yes it recognizes both hard drives just fine.
The answers I've found on the web suggest to backup my drives and repartition. I'm not too hot on that "solution".
explain why a F4 partition table is not recognized by F10?
BTW, I've recently upgraded my motherboard, processor, DVD drive, regrouped both my IDE drives on the same bus, ... I consider it a miracle F4 still runs on this PC (although F4 does not support the motherboard's graphics card, so no X11).
My cdrom drive was working until yesterday it didn't mount at all. It said 'special device /dev/scd0 does not exist'. I went and checked in BIOS and the CD rom was not identified there as well I would like to know if there is a workaround for this problem. I am using an ACER aspire 4520 laptop with only ubuntu 9.10 on i
View 3 Replies View RelatedI recently did a fresh Maverick install on my old Medion laptop (MD 42200), and a problem occurred.
The problem is that the CDROM-drive is not recognized by Ubuntu. There is no icon on the desktop when I insert a disc, and I can̈́'t find it in either /media, /cdrom or /dev.
I can see it in the standard Disc Tool program, where it is listed as being located in /dev/sr0, and it is visible in a downloaded Device Manager.
What can I do to access my CDs?
My cdrom was sort of working, but the tray was physically damaged. The usb was working without a problem.
After replacing the the cdrom drive with a similar model known to work well I could not get it to mount. I then tried to move important files to usb to try a fresh install. The usb stick flickered when I put it in, but it didn't mount. Same behaviour as the cdrom, the light goes on when I turn on the computer, but once I'm logged in I can't access the cdrom.
I have tried multiple variations of playing with fstab and trying to mount things in terminal to no avail. I just can't get Ubuntu to recognize the usb or cdrom even though their lights go on when I first try to use them.
I've just installed Ubuntu desktop 10.10 (32 bit). No matter what programs I run, the CD-ROM (DVD-ROM) drive is checking for a new CD/DVD every 5 seconds or so (even if no applications are running). It is quite annoying because of its robotic noise. The drive is empty. How could this be turned off? Is the media manager misconfigured by default?
View 1 Replies View RelatedI have installed ubuntu in my D drive on my lenovo laptop but it not recognizing D drive only recognize C drive
View 1 Replies View RelatedI am new to this and just got a SUN Netra 440MHz T1 105 with 512MB RAM, 2 19G SCSI drives and a IDE CDROM.I am having trouble loading Ubuntu 9.05 server iso via the CDROM. The CDROM driver does not get found and the installation aborts. The CDROM is a 24x toshiba XM-7002B.I can load the old Ubuntu server 7.10 but cannot update it. (would need some help to do that, too).
View 4 Replies View RelatedI am running Fedora 14 and have a problem where I am not getting any kernel uevents for the cdrom drive.
This only happens if I do an install without the X Windows (Gnome). Also if I install CentOS 5.5 without any X Windows I do get the uevents for the cd drive.
So the problem is occuring when doing a minimal install (with Base packages and a few others) on Fedora 14.
I am running in vmware workstation 7, but I have also tried to install this without vmware on a seperate pc with the same results.
One slightly strange thing is that Fedora with X Windows detects the cd drive as VMware_IDE_CDR10 and Fedora without X Windows as CDDVDW_SH-S223L (which it really is).
I am using "udevadm monitor" to watch udev events, and "udevadm info --query=property --name=/dev/cdrom" to get the cdrom details.
VirtualBox 4.3.14
Windows 7
Debian 7.6
I'm trying to create a new VM with Debian 7.6. I downloaded the 3 install iso discs and tried to install. When I begin the installation it seems to take control of the CDROM and I am no longer able to eject it by either pressing the eject button or trying to eject through Windows. The installation goes fine until it asks if I have any other discs to install (which I do ... I have 2 more). At this point I say "Yes" but I cannot get the CDROM to open up at all since it doesn't automatically eject for another disc and as I mentioned before ... I can't do it manually or in Windows.
- I cannot do an installation over the internet because this is a government computer which is requires to be hooked to a government network. There are certain certificates required to access the network which are not available to my newly made (or in the process of making) Linux system but rather only to my host Windows system.
- I cannot use a newer version of VirtualBox because that opens up a whole new set of issues dealing with WinVerifyTrust getting CERT_E_REVOCATION_FAILURE most likely due to our symantec security software.
So my Storage Settings in VirtualBox are as follows for my CDROM drive:
- Controller: IDE Controller
- Type: PIIX4
- "Use Host I/O Cache" is checked
- Host Drive D:
- CD/DVD Drive: IDE Secondary Master
- "Passthrough" is checked
I cannot install the Debian 7.6 OS because I cannot eject each disc and put in the next disc. The only way I can eject the disc is if I reboot my entire system (host windows system) which obviously leaves me at an unfinished point in my install and therefore I have to restart the install and end up right where I was 30 minutes earlier.
The CDROM/DVD drive in the new computer was defective. Everything is working now.
My ancient Dell desktop finally kicked the bucket but the hard drive was relatively new (less than a year old).So I replaced that old desktop with a new desktop (not Dell this time) and decided to just plug in the old hard drive - to see what happens.Well, I was pleasantly surprised when Debian booted up and executed as normal (ok then, ALMOST normal)!
The problem is that the CDROM/DVD-RW is not recognized.For example, I have an audio CD in it, but neither file managers or multimedia players can see it (where 'it' is either the CD itself or the CDROM device).
I've tried GUI applications like mplayer, kplayer, Vlc, dolphin, pcmanfm; and I've tried the command line as well (bash).Short of doing a complete reinstall of Debian, is there a way to get it to recognize this 'new' hardware?
just installed squeeze today, all went well but when I put a cdrom or dvd disc in it will not auto mount.. have to manually mount them from terminal. I've looked a /ect/fstab and do not see any problems there. Anyone else run into this problem on a squeeze install and fixed it?
View 3 Replies View RelatedI downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
I inserted a disc and tried to access it through Dolphin. It shows up in the directory explorer thing as a disc and with the disc name, but it has a little / thing in the bottom corner of the icon, and when I try to access it, it gives me this long error on the bottom of the file area (can't remember what all it said, something about 'harvey' and being unable to find the directory in /etc/fstab). The same thing happened with an external drive, which seemed to work fine before but now has the same problem.
View 5 Replies View RelatedI tried to mount my CD Rom drive and got this response: "mount: can't find cdrom in /etc/fstab or /etc/mtab"
I did see the CD Rom drive briefly after I upgraded from 10.04 to 10.10 but I couldn't access the drive and when I logged back in.
I have successfully setup a FOG server to image my Windows clients, so I have tftp, pxe and anything else related to booting to a pxe server setup and rocking. What I'm trying to do now, is use the CentOS net install files to setup CentOS on an old server with no USB boot option, and a broken scsi cdrom drive (it's a Dell PowerEdge 2400, with a single PIII 733 and 1.25GB ram).
Using the FOG Projects gparted wiki entry (adding gparted to the pxe boot menu) I was actually successfully able to pull the net install files over to the PE, and install CentOS 5.5 via local ftp server. At first it kept erroring out (I kept picking and choosing individual packages from the package groups), so I thought it may be an issue with the GUI install (the python script kept spitting back errors forcing a reboot). In any case, I finally got through the GUI install, but now I need / want to know how to force a text mode install.
[Code]....
the bolded "append" line is where I thought I could force the text mode install script, but that didn't work. The vmlinuz and initrd.img files were both pulled form the net install iso, NOT the livecd. Would that have made a difference? If not, what / where / how should I force the text mode install script?
I have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
View 9 Replies View Relatedjust installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies View Related