Ubuntu :: Mount Selected USB Drives As Msdos Filesystem?
May 3, 2011
I recently switched to the Ubuntu 10.10 version from the 8.04 version, and when I looked for the Drive and Volume tabs in the USB Properties dialog, they were no longer available. In 8.04, I used the Volume tab to set the mount point and file system for selected CompactFlash drives connected to the computer through a USB adapter. It is important that these selected drives be mounted as msdos rather than vfat because of the characteristics of the legacy system that they are used with.
how do I get the functionality I had in 8.04 under the Drive and Volume tabs of the device properties dialog?
View 1 Replies
ADVERTISEMENT
Apr 12, 2011
I'm trying to boot Emdebian Grip 1.0 built on Compact Flash on a mini PC with grub2 as bootloader. Unfortunately , the booting is unsuccessful and I got stuck into an error message :Code:No filesystem could mount root , tried : minix msdos iso9660kernel panic - not syncing : VFS : Unable to mount root fs on unknown-block (22,1)It seems grub2 hasn't tried to mount ext2 as the filesystem and my Compact flash is formatted as ext2. Here is the menuentry of the grub.cfg :
Code:
menuentry "Debian GNU/Linux, linux 2.66.2.9-custom" {
insmod ext2
[code]...
View 4 Replies
View Related
Jun 10, 2011
Sometimes when I plug in a USB flash drive, it is mounted to /dev/usb0 instead of /dev/drivename. This poses a problem for me because I have applications that depend on files I keep on flash drives, and having to frequently change the file paths is difficult. I haven't been able to find anything on this topic with a cursory search on Google or through the Debian reference. Heck, I don't even know what /dev/usb0 is (though I would like to learn, in the interest of being less of a noob). This is happening on a Squeeze system running Gnome, so I believe nautilus is what's responsible for auto-mounting my flash drives.
Beyond that, I don't know what other information I should provide; if you need to know something else, ask me (and perhaps tell me how to access that information). Someone on IRC suggested that I didn't have my drives set to mount in /dev/, but I have no idea how I would go about fixing that. If there's a configuration file that deals with this sort of thing, chances are I haven't touched it since installing this system. Debian installer sees usb drive as cd drive, so it adds it in fstab, but with wrong file system options (udf,iso9660) which is not the one your flash drive uses.
View 13 Replies
View Related
Jun 11, 2010
How can I change the selected drives to boot from. I want to set my windows drive first so I don't have to select it each time.
I have ubuntu 10.04.
View 4 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Jun 3, 2011
I installed 15. I have reformatted the 500mb /boot partition, didn't touch the swap partition, formatted the / partition. Trying to boot, I receive a "cannot mount selected partition". This is a fresh install. I rebooted into the Live CD to do some FS Checks, and got kernal crash, black screen, lots of kernal output while in live CD trying to do FS checks. The only line that looks like it holds any info that may be relevant is the last of the lines that says: Kernal Panic - Not Syncing: Fatal exception interupt PID 1161, comm:irq/21-0000:01: tainted: g d (kernal version) Panic+0x91/0x19c
I did an FS check on /boot and it came back fine. I did an FS check on /, and it came back fine. But then I told it to do an FS check on swap and got the warning that swap is currently mounted, and that if I proceed, it could cause serious system damage, and asked me if I wanted to proceed. I chose no, and it crashed.
---------- Post added at 02:59 AM ---------- Previous post was at 02:42 AM ----------
wait, i think i found the problem. It APPARENTLY installed /boot as ext4. Reinstalling now. Will update momentarily...
---------- Post added at 03:06 AM ---------- Previous post was at 02:59 AM ----------
Nope, i explicity made sure i installed ext3 on boot this time, and it still gives the same boot error, AND i KEEP getting that kernel crash.
View 1 Replies
View Related
Mar 12, 2010
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies
View Related
Jul 22, 2010
I 've reinstalled XP partition on my ubuntu system 8.10 ,After that i reinstalled grub using live CD ubuntu 9.04
With the following commands:
but when i restarted the system i got the grub menu .. but when i select ubuntu i got the following error message: " error 17 .. can not mount selected partition "
View 1 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked.So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbookso I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"Things I already tried:*Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation.*I tried removing the usb and setting the HDD back to first boot in the bios andthen changing the menu.lst accordingly, still I get error 17.Below is the information just after boot with the usb still plugged in and set as first boot in bios.fdisk -l
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
View 9 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked. So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbook so I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"
Things I already tried: Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation. *I tried removing the usb and setting the HDD back to first boot in the bios and then changing the menu.lst accordingly, still I get error 17. Below is the information just after boot with the usb still plugged in and set as first boot in bios.
[Code]...
View 3 Replies
View Related
Oct 10, 2009
I am having problems with grub. Originally I was having trouble installing Service Pack 2 for vista and I made the fool's mistake of changing the active partition in disk management from the boot partition to the windows partition. This blew up grub. After restarting I was dumped at the grub terminal i.e.
grub>
so I thought okay, I will just reinstall grub. I ran setup (hdx,y) but now when I restart first of all the splash screen is different, rather then the blue background with the big words in white, fedora 11, it's black and I get a error saying unable to read any images. I can see the different OS' I have on the grub screen but attempting to load any of them gives me
error 17 cannot mount selected partition.
I am currently running the Fedora 11 xfce spin live cd. From the terminal here, here is some information. sda3 is my fedora 11 partition I am not sure maybe it is because of ext4 but I can't seem to mount it using mount /dev/sda3 /mnt/xxxxx.
[root@localhost grub]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x72edceee
Device Boot Start End Blocks Id System
[Code].....
View 11 Replies
View Related
Jul 9, 2010
I installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
Code:
grub>setup --stage2=/boot/grub/stage2 --force-lba (hd0,3) (hd0,3)
Error 17: Cannot mount selected partition
grub> quit
View 2 Replies
View Related
Dec 15, 2010
i ran into this issue only because i wanted to learn. I was reading the book, linux troubleshooting and decided to give it a try.
1) I went to /boot/ and moved vmlinuz (kernel file) to my home directory. (/root/)
2) I booted, it didnt boot (as expected) and now the troubleshooting part begins.
3) i entered to grub config mode using c
4) When i press root (hd0, (tab) it gave me 2 partitions. hd0 which is my boot partition hd1 which is my '/' partition. Please keep in mind its LVM and not a physical partition
5) If i do this, root (hd0,1), and press boot, it gives the following error Error 17: Cannot mount selected partition
During my research i found that, LVM is not supported by grub, so kindly confirm me this ? is this the reason i am not able to access my root partition ? i am doing this on vmware so no issues, but just for the sake of learning, can someone tell me some way of restoring it without using any rescure disk (livecd, liveusb etc) ?
View 26 Replies
View Related
May 10, 2010
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
View 7 Replies
View Related
Jun 4, 2010
I dualboot Ubuntu and Fedora in one hard drive. Below are the scenario.
First, installed Ubuntu 10.4 on the entire disk (40GiB of size). Then, shrink the Ubuntu installation to equal size to free up space for fedora.
Second, installed Fedora 13 using the option "Use free space on selected drives and create default layout". After the successful installation fdisk -l shows,
Code:
# fdisk -l
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
View 2 Replies
View Related
Jul 18, 2010
i am new to linux and i nid a bash script to Delete selected backup files and also restore selected backup file to a user define directory.
View 3 Replies
View Related
Oct 3, 2009
I have a multi-user machine with several network interfaces (Ethernet, if that matters). I wish to grant selected users, or groups, full access to selected network interfaces (including ability to adjust IP address and to bind to low ports, but *only* on those interfaces). It is important to me that an user/group does not such full control over other interfaces. Granting partial, or temporary, root permissions is OK; it's a friendly environment.How do I go about it?System: Linux 2.6.recent; usual Debian setup (can be adjusted if needed).
View 2 Replies
View Related
Mar 6, 2010
I need to examine a hard drive that came from another system running Ubunut Server (not sure what version). I know the drive has LVM on it, so as far as I understand that means the drive will be treated as EXT4 for mounting. I can't boot from the actual disk, but I have used a IDE to USB connector to make a binary copy of the drive, which I've mounted as a loopback device. However, when I try to mount the loopback device properly, I get this:
root@~je:/# mount -o ro -t ext4 /dev/loop0 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried using -t ext4dev too, but that just gives an unknown filesystem error. The file I've got mounting in /dev/loop0 is a .dd file, created by imaging the drive using dcfldd on the server drive while it was mounted (as /dev/sdb). System I'm working on is running Ubuntu 9.10. All I need is to be able to mount the server drive so I can traverse the file directories, there's a few things I need to check on it. If needed I can dispense with the whole loopback setup and just directly connect the server hard drive again using the IDE to USB cable, but I'd rather not do that; it's imperative that the drive doesn't get altered, or at least as little as possible.
View 5 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Jul 9, 2010
I am a regular user of ubuntu . I reinstalled my window XP ( windows / ubuntu dual booting )
after that i give the commands
grub > root (hd0, 6)
>setup (hd0)
after that when i restart the system i got the following message
" error 17 can not mount selected partition "
when i selected ubuntu
View 3 Replies
View Related
May 30, 2011
I'm having some trouble with my Ubuntu 10.04. It had been working normally, and now my startup isn't occurring normally. The bootloader shows my Windows install and two different revisions of Ubuntu. Upon letting it load Ubuntu, however, it goes to BusyBox v1.13.3 and says "built in shell (ash)" and presents me with a functioning command line.
I'm comfortable with working on the command line, but does anyone know where to start with this?
View 2 Replies
View Related
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
View Related
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Jan 8, 2010
Something very strange happened. Firefox was acting a little strange, so I decided to restart my system. When ubuntu started to boot it showed an error that said filesystem failed to mount. It gave me an "emergency" command line and told me ctrl-D would retry the mount. Why would this happen? I haven't modified any system files for a very long time. It told me to run fsck (I think thats what it was) and that seemed to fix the problem. Just curious as to what could have happened. Anyone else have this problem? Anything I should try to fix so this won't happen in the future?
View 2 Replies
View Related
Jun 24, 2010
when I try to boot into Ubuntu 9.10 the first thing that happens is this:
Filesystem checks are in progress
I have seen this on a few occasions and thought nothing of it, I have let them complete in the past and was able to boot no problem, but recently that has changed, whether or not I let the checks complete I get the following error:
Mount of filesystem failed.43708f-0498-4699-9fd5-1f52df0bc181
A maintenance shell will now be started.
Any thoughts on recovering this partition or at least gaining enough access to it to backup some data?
View 4 Replies
View Related
Sep 2, 2010
I have ubuntu and windows installed on my computer, and sometimes I would need something from the folders I have on windows and I would mount the main hard drive. But now it's telling me "Not Authorized"
View 1 Replies
View Related
Nov 29, 2010
I'm running Ubuntu 9.10 on a dell desktop from idk when, its fairly old but regardless it was all running fine until about a week ago I got the infamous:
Mount of filesystem failed. A maintenance shell will now be started. Control-D will terminate this shell and start a new one. admin@ or whatever it is you get the point.
I've been trying all the possible solutions I could find and nothing seems to work. I just want to be able to use this computer. I don't care if I lose files, or have to re-install Ubuntu or any of that, if I can just get the thing running again. I've tried re-installing, and booting from the disc etc. none of which have worked. Basically, I just want to erase Ubuntu and re-install it.
View 3 Replies
View Related
Jan 7, 2011
I have had a system crash and have no idea why - I have booted up through the cd and are runnign off that but i need to know how to get the information off the hard drive before I attemp to format and start again.
Error msg:
Unable to mount 990 GB Filesystem
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 9 Replies
View Related
