I've just installed Debian AMD64 on my main box (Intel Q6600, Ati HD4770, Asus P5K) using the DVD install. It boots, but hangs when it tries starting the graphical interface. No reports, no commandline, nothing at all - a nice black screen and completely unresponsive system.
Debian x86 works with no problems.
I've just installed Debian AMD64 on my main box (Intel Q6600, Ati HD4770, Asus P5K) using the DVD install. It boots, but hangs when it tries starting the graphical interface. No reports, no commandline, nothing at all - a nice black screen and completely unresponsive system.
View 2 Replies View RelatedI just have installed a fresh copy of Debian 8. However I cannot boot it. Thus the boot procedure start as below and for some reason it stops.
Loading, please wait...
fsck from util-linux 2.25.2
/dev/sda/: clean, 151066/30040064 file, 3893607/120130816 blocks
I have an annoying problem with a 2 nodes cluster that I don't understand.
One of my server is totally shutdown.
When I start cman after a reboot on the other server, it hangs on "Starting fencing...". The process which is actually hanging is : /sbin/fence_tool -w -t 300 -m 45 join
When I start this program manually, I get this output :
# /sbin/fence_tool -w -t 300 -m 45 join
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
(and so on...)
What I don't understand is why the fence_tool program wait for the 2nd node to join the cluster and don't fence the other node.
Here is my cluster.conf :
<?xml version="1.0"?>
<cluster name="ctpsrv-bdd" config_version="7">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="20"/>
<cman expected_votes="1" two_node="1"/>
[Code]....
Would it be a good idea to edit the cman startup script and remove the "-w" option of command fence_tool join, so the command do not hang up ?
Using VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.
View 1 Replies View RelatedThe way I usually boot Linux distros, and this has worked for every distro I have tried up to Kubuntu 10.10, was to install Grub2 on an extended partition, run "dd if=/dev/sda5 of=linux.bin bs=512 count=1", and then adding that bin file to my Windows boot.ini. What usually happens after is that I get the Grub2 menu after selecting it from the Windows Bootloader.
The problem is, with the latest Squeeze AMD64, all I get when I do this is a static cursor and the computer is frozen and I have to hit the reset button.I mounted the Linux partition with Ext2IFS (mkfs.ext3 -I128 /dev/sda5 to get 128KB inodes), and I can see that the Squeeze installer did indeed install Grub2, because I can see the files in their respective directories.
I'd like to install Debian on the Notebook Intel Core i5 64-bit.Should I download and install amd64 version?
View 2 Replies View Relatedi reached step six where it states "6. When the root and swap partitions are formatted the base installation will begin. Note that your system may appear to hang at different points during the install but it hasn't. Just be patient." I have been staring at a blank blue screen with this blinking cursor at the bottom for 30 minutes and i was just wondering how much more "patient" will it take. for some system details. the system is clean / fist time run and anything installed on it.
View 7 Replies View RelatedI have Asus Z87-PRO motherboard with i5-4670k and I'm trying to install Debian Testing with 64-bit architecture. My problem is mouse and keyboard (I guess USB in general) stop working after installer get loaded (the last thing I do is choose between text and graphical install). I found a few topics on different forums indicating that I should enable IOMMU (Intel VT-d) option in my bios.
The problem is that Intel k-series processors didn't use to have IOMMU support, so there's nothing I can do about it. I tried changing different bios options like disabling UEFI, enabling xHCI and EHCI with no luck. Passing "iommu=off" or "iommu=soft" to the boot command also doesn't work. However, I have LMDE 2 64-bit live cd (based on Debian Jessie) and it works fine, so I guess my problem may be related to some changes in 4.2 kernel.
I installed Debian Squeeze on a laptop today, with the official i386 DVD1. At the end, I was very disappointed to notice the installer automatically chose the amd64 kernel (with i386 packages ? how does that work ?). The hardware is compatible, but I'd really like to use the i386 kernel instead. Earlier, you could choose the kernel during installation ; I looked in Expert install with no luck. Where is it ?
View 4 Replies View RelatedI just installed Debian stable from the standard i386 DVD. When I booted up, I noticed that GRUB showed me that I had the amd64 version of Debian installed. However, I did not download an amd64 DVD, nor do I want that architecture installed on my system (even though my system can support it). The output from "uname -a" (which included both "amd64" and "x86_64") also seem to confirm this. However, I was able to install 32 bit packages and get them to work (gdebi wouldn't even let me do this when I had Ubuntu 32-bit).
View 4 Replies View RelatedI have got the following Problem: I installed the 64 bit lxde Debian version... I couldnt configure the network during the installation because I just have a dsl modem and not a router... so the configuration of the network failed.... after the installation I started debian... and was surprised about the lack of "basic system configuration"-software that had been installed... I couldnt find aptitude or whats the debian-Update-Programm called .... instead I found OpenOffice... HAE? then I tried to configure internet access..... so I started a terminal and tried to start pppoeconf... but the program wasnt found! ARRRGG! What am I doing wrong here.... Why are these system utilities like pppoeconf not always installed...
View 1 Replies View RelatedHaving trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
View 3 Replies View RelatedI just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code:
[ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.280020] usb 1-5: device descriptor read/64, error -110
[ 17.375755] sky2 0000:02:00.0: eth0: enabling interface
[ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load"
[Code]......
Trying to install Debian Sid in VMWareplayer....
Got image debian-testing-amd64-netinst.iso from : [url]
Following happens :
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
I recently tried to upgrade from 2.6.23 to 2.6.32 but kept on getting VFS errors. I had overwritten the old 2.6.23 kernel so there was no going back. Luckily,I had the 2.4.31 kernel still in the /boot directory.
Anyway, I finally got some time to figure out the VFS issues and I managed to solve the VFS kernel panics. It was probably a forgotten configuration setting during the make menuconfig. Now it boots up only to hang right after the "Using /etc/random-seed to initialize /dev/urandom".
Looking at the rc.S script, the next section does the dd if=/dev/urandom of=/etc/random-seed count=1 ...
I know for a fact that it isn't that line that hangs the system. I commented out that line and it still hangs.
Strange thing is that I can boot up 2.4.31 with no problem; but with 2.6.x, I get a hang-up. I did a google and came up with something about rc.udev.new, which I don't have.
Can someone point out to me what is executed right after/etc/rc.d/rc.S? Or maybe point out where it might
be hanging? (To be honest, it's either a hang up or a process that's taking an extraordinary long time to
run.)
I am trying to install debian on my windows PC but am receiving some errors with it. I have downloaded "debian-506-amd64-DVD-1.iso" from debian website and am seeing that the md5 sum is correct. I am getting following error when I choose Graphical Install or install.
[ 1.480788] crc error
[ 1.569788] kernel panic -not syncing:VFS: Unable to mount root fs on unknown block(253, 52)
Description of my PC: I have 2 hard disks
1. IDE hard disk (80 GB) -> windows is on this drive
2. SATA hard disk(250GB) -> I intend to install debian on this drive.
3. MSI motherboard & AMD 64 processor with 1 GB RAM.
4. NVidia external graphics card based on AGP slot(256 MB)
EDIT:: This time I got one more error message prior to the 2 shown above [some number] PCI:Cannot allocate resource region 0 of device 0000:00:00.0
I installed skype for linux from skype site which is a 32bit application. I followed the instructions from this link: [URL] It is true that skype was installed and I could launch it. But during log on - it hangs.
running skype through terminal gave me this error/warning messages:
Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(<unknown>:2813): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
(<unknown>:2813): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so: wrong ELF class: ELFCLASS64
[Code]....
and yes I am running Debian GNU/Linux Sid AMD64 with AMD 64 Athlon X2 as cpu....
I tried to compile an x86 linux kernel from amd64 machine. It is giving errors even after installing "gcc-multilib" But I wonder, it should be simply doable becuase "gcc -m32" creates 32 bit binary . I would prefer to compile it natively on x86_64 rather than creating an exclusive x86 chroot for that. Has anyone tried this on native x86_64?
View 4 Replies View Relatedi have game LFS and i cant run it.
[code]....
And answer from wine forums: [*]Migi wrote: but OpenGL is working, i have Debian Sid AMD64, Wine needs 32 bit OpenGL.[*] How can i (can I??) run 3D on wine on to amd64?
i just want to know whats the best way to do it cause i use a method which i dont know if is ok (by the way it works) but im not sure if my card is giving 100% (Geforce 8600gt), right now im using mys system isSqueeze with the non-free repos, what i usually do to get Nvidia work.
View 1 Replies View Relatedi have a pc having OS Windows XP and Windows 7 installed (hd0,0 and hd0,1). Yesterday i installed Debian 6(hd0,5). But it doesn't show boot menu on startup. It automatically load GRUB and start loading Debian. While i m on GNOME or KDE i can see all the files of windows XP n 7. Is any way to rescue and boot with Windows???
And yah one more thing ... i also dont have menu.lst file in /boot/grub/.
I'm using my Debian installation for a long time (~10 years) and my system is evolved to fit my tastes, usage habits and hardware setup. However, this system started on 32bit hardware and It's having some major limitations (both performance and coping with the hardware) on a 64bit system with 16GB RAM.
I've read the cross grading manuals on the network and they don't feel like firmly tested and the best ways to do it. I'm perfectly capable of anything, minimum downtime is essential since this is my primary workstation and I need it for many daily (light and heavy) tasks.
I have not been using my lenny 2.6.26-2-amd64 for about a month or more.I booted it today, and there were over 30 updates available, inculding some kernel header updates I installed all these updates and rebooted.Well, there are 2 new entries to grub menu:Linux 2.6.32-bpo-3-amd64Linux 2.6.32-bpo-2-amd64 (single user or recovery)in addition to my old kernels.So, I chose the bpo-3 entry, but it just sits there.I have to chose the kernel before the update. Is there something wrong with the update? dit: I just found out that synaptic manager does not show 2.6.32-bpo-3-amd64 at all as being installed.In fact, it is not in the header list nor the image list.
View 5 Replies View RelatedI am trying to compile wine (1.1.28) in squeeze (AMD64). After I run the configuration scripts, I receive this error:
"configure: libhal/libdbus 32-bit development files not found, no dynamic device support."
I installed the ia32-libs package and libhal.so, libhal.so.,1libhal.so.1.0.0, libdbus-1.so exist in /usr/lib32.
I am compiling wine with the USB support patches, so I believe I will need libhal.
i wondered if there is any way to use a 3com 3crusb10075 with lenny amd64 (5.0.5).
View 1 Replies View RelatedI'm trying to use nspluginwrapper to run 32bit Flash in Iceweasel. I need some 32bit libraries that aren't included in ia32-libs, like libnss3.so and libssl3.so. However I have no idea how to get them. I've tried aptitude install ia32-libs-libnss3 like it says on the wiki but it just tells me that it can't find ia32-libs-libnss3. I've also tried aptitude install libnss3.so but it gives me the same error. I'm running amd64 Lenny 5.0.5. What should I do?
View 4 Replies View RelatedI have tried these approaches (atleast these two) as mentioned in the following
url
url
I have used other approaches as and when I found them and have used them in a haphazard manner. I am currently not sure about all that I have done.
I can see some flash videos ( presently only some on .....) while I cant see many others. I would want to configure flash so that I can enjoy the videos.
Here is some details about my system
UshRaj:/home/raja# lshw -short
H/W path Device Class Description
system System Product Name
/0 bus M4A78-E
/0/0 memory 64KiB BIOS
code....