Debian Installation :: Installer Incorrectly Installs AMD64 From I386 DVD?
Aug 4, 2011
I just installed Debian stable from the standard i386 DVD. When I booted up, I noticed that GRUB showed me that I had the amd64 version of Debian installed. However, I did not download an amd64 DVD, nor do I want that architecture installed on my system (even though my system can support it). The output from "uname -a" (which included both "amd64" and "x86_64") also seem to confirm this. However, I was able to install 32 bit packages and get them to work (gdebi wouldn't even let me do this when I had Ubuntu 32-bit).
Setting up a randomly passworded swap partition in Debian installer with the default settings (aes-xts-plain64 w/ AES-256 key strength) gives the following line in /etc/crypttab:
However according to cryptsetup manpage when using XTS mode the key size must be doubled so in effect the 'size=256' parameter above is actually resulting in AES-128 strength, no? To get 256 bit key length the size option should be set to 512. Quote from cryptsetup manpage:
For XTS mode (a possible future default), use "aes-xts-plain" or better "aes-xts-plain64" as cipher specification and optionally set a key size of 512 bits with the -s option. Key size for XTS mode is twice that for other modes for the same security level.
I installed Debian Squeeze on a laptop today, with the official i386 DVD1. At the end, I was very disappointed to notice the installer automatically chose the amd64 kernel (with i386 packages ? how does that work ?). The hardware is compatible, but I'd really like to use the i386 kernel instead. Earlier, you could choose the kernel during installation ; I looked in Expert install with no luck. Where is it ?
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
I have Asus Z87-PRO motherboard with i5-4670k and I'm trying to install Debian Testing with 64-bit architecture. My problem is mouse and keyboard (I guess USB in general) stop working after installer get loaded (the last thing I do is choose between text and graphical install). I found a few topics on different forums indicating that I should enable IOMMU (Intel VT-d) option in my bios.
The problem is that Intel k-series processors didn't use to have IOMMU support, so there's nothing I can do about it. I tried changing different bios options like disabling UEFI, enabling xHCI and EHCI with no luck. Passing "iommu=off" or "iommu=soft" to the boot command also doesn't work. However, I have LMDE 2 64-bit live cd (based on Debian Jessie) and it works fine, so I guess my problem may be related to some changes in 4.2 kernel.
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
I'm using my Debian installation for a long time (~10 years) and my system is evolved to fit my tastes, usage habits and hardware setup. However, this system started on 32bit hardware and It's having some major limitations (both performance and coping with the hardware) on a 64bit system with 16GB RAM.
I've read the cross grading manuals on the network and they don't feel like firmly tested and the best ways to do it. I'm perfectly capable of anything, minimum downtime is essential since this is my primary workstation and I need it for many daily (light and heavy) tasks.
There's a certain program I'm trying to run that will only work with the 32-bit version of a certain library - the 64-bit version included in the repository won't work for it. I found an i386 .deb package online (made for ubuntu but it should work with regular debian), but when I try to install it, it says incorrect architecture, use amd64 version instead.
How can I force it to accept the i386 version of this package?
the mcr85+1 packages were built using qt 4.6.3, so will be squeeze-compatible. umplayer is a fork of the abandoned smplayer project which adds skinning, shoutcast stream, and minitube-like videos search, playback, and download capability to the program.
[url]
i did a pull and build from the svn repo, since that is newer than the 0.92 debs on the website and solves some videos issues. debianized sources included so one can build the program on any architecture that supports qt 4 4.6 and mplayer...plus it's a good idea not to trust anybody's binaries off the web, so to be really safe, rebuild the program yourself if you don't know who the heck i am. update 20 april 2011: link to svn 143 builds and sources: [url] update: 25 june 2011: new pull from svn--fixes the returning control bar problem with skins and kde 4 kwin desktop effects enabled:
[url]
squeeze users should use the mcr85 packages, the mcr110 ones need qt 4.7. sources included as usual. it looks like it would be a nice addition to the debian repo...
I am planning to install Debian amd64 and i386 in the same USB HDD to boot both types of PCs.
Unfortunately, there is not enough space for the home folder, so can I share the home folder with two systems. And how about swap area and /tmp folder?
I recently upgraded my hardware and installed 32-bit Karmic (well really Mint 8 ) before realizing I would probably have gotten better performance from the amd64 architecture. Is it possible to convert an i386 system to amd64? Is it a good idea? Will there be a lot of problems afterwards? Is it easier to just backup home and etc, install a clean 64-bit system, then restore settings from backup? If I do convert the system, how do I do it? I thought I might be able to just install a different kernel but I can't find an amd64 kernel in the repositories..
I have a computer with internet access with amd64 architecture running Debian stable (Lenny). I have another computer with NO internet access with i386 architecture running Debian stable (Lenny).I want to download some packages for the i386 computer using the amd64 computer. So far, the only way I can see to do this is to use dpkg-architecture to temporarily change to i386 on the internet computer, run aptitude with the download-only option to retrieve the packages I need with all suitable dependencies, then switch the internet computer back over to amd64.
I can't imagine I'm the only person who ever needed to do this, and yet I've had no luck finding any advice. The method I described seems rather awkward - is there a more elegant solution?
I apologize to the membership, I realize now the absurdity of this subject. Having now studied the online repository search functions closer, I see it appears packages are automatically retrieved with all necessary dependencies. As such, it is not necessary to use apt and its various functions to do the job.
I've spent a frustrating afternoon trying to install Xubuntu 10.04 x64. I had already installed Win7 Pro 64, and have been attempting to install on a separate hard drive. It wouldn't even boot into Xubuntu install. Figured a bad burn on the Cd so I reburned the image I had down loaded using Ktorrent. It wouldn't boot either. I swapped out the DVD burner. Still no go. Redownloaded using Ktorrent including the torrent. Wouldn't boot into the installer.
I did a fresh burn. Still it wouldn't boot to the installer. I then downloaded Xubuntu again but from a mirror and not using Ktorrent. Good MD5SUM. Burned it again on another computer. Still wouldn't boot into the installer. I burned a copy of Kubuntu 10.04 x64 and it installed with no difficulty. I've installed Xubuntu 10.04 x86 several times on other computers win no difficulty. But I have 8 Gb of RAM on this machine and want to use Xubuntu 64.
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock) 1 Gb OCZ PC-3200 ram (2x512) PNY Verto FX5200 Western Digital 40 Gb IDE hard drive based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386 -libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
I have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** ************************************************** sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb [sudo] password for aUser: dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
I want to make a live-USB containing among others both Ubuntu desktop i386 and Ubuntu desktop AMD64. How do I go about this? I tried using unetbootin, first adding i386 and then amd64, but that failed. My computer with an athlon II did manage to boot, and showed it had booted into the 64-bit version (ram shown was 3.9 GB, i386 goes to about 2.7 I think), my wife's computer with a pentium 4 did not manage to boot, got to a black screen. I think this is because casper has issues, being overwritten (I'd seen something to that effect somewhere), and thus only the latest version added being booted (in this case amd 64).
I'm under the impression that the startup disc creator included won't help, nor won't the multicd.sh script, so how do I circumvent the issues?
Is there an easy way to downgrade from the AMD64 version to the I386 version of 10.04. I am having all sorts of problems with my machine running the AMD64 version of Ubuntu. The same problems do not occur on my netbook where I use the I386 version.
I have an Amd64 processor. I guess that I should install the amd64 alternate cd instead of the i386 installation. What would be better for me and which problems can occur?
I have a Intel machine and what do i do? I install the AMD64 and not the i386. DO i need to uninstall the AMD and instal the i386 for my 64 bit machine?
I think I found a bug with the maverick installer. [URL]. The installer is incorrectly reading my partition table I'm afraid it might overwrite data. /dev/sda3 is the target for the install.
/dev/sda1 = 200M = Windows system partition /dev/sda2 = 239G = Windows install /dev/sda3 = 50G = Where I want to install Linux /dev/sda4 = 45G = NTFS storage
At first I had /dev/sda3 as a RAW type. In fact the only way I could create ext4 is via mkfs. I did unmount them before proceeding - mounted just as a reference in the screenshot. fdisk reads the same thing. Fresh install from LiveCD. I only have Wipe entire disk or Advanced in the installer. I don't have the "Install along side another OS" option.
I'm installing a file server on Lenny (Samba on RAID5, nothing exotic)
First, I installed on a basic SATA drive, to check everything else in the system was recognized correctly. Success.
Then, I added my 3405 Adaptec board, with a 3 drive RAID5, and reinstalled, still on the lone SATA disk.
Install runs ok, shows correctly the 3405 board, detects the logical drive alongside with the SATA drive. Smooth. I install Lenny on the SATA drive, planning to use the RAID5 for later partitioning and data storage. During install, the SATA disk is shown as SCSI-1 and the RAID5 disk as SCSI-2. Again, install completes correctly.
But on reboot and after selecting the default config, the system complains it can't find /dev/sda1!
If I remove the 3405 board, Lenny boots fine.
Is the presence of the Adaptec board and RAID5 drive changing the numbering of the disks, so that the SATA disk is no longer seen as /dev/sda1 ?
I've just installed Debian AMD64 on my main box (Intel Q6600, Ati HD4770, Asus P5K) using the DVD install. It boots, but hangs when it tries starting the graphical interface. No reports, no commandline, nothing at all - a nice black screen and completely unresponsive system.
Using VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.
The way I usually boot Linux distros, and this has worked for every distro I have tried up to Kubuntu 10.10, was to install Grub2 on an extended partition, run "dd if=/dev/sda5 of=linux.bin bs=512 count=1", and then adding that bin file to my Windows boot.ini. What usually happens after is that I get the Grub2 menu after selecting it from the Windows Bootloader.
The problem is, with the latest Squeeze AMD64, all I get when I do this is a static cursor and the computer is frozen and I have to hit the reset button.I mounted the Linux partition with Ext2IFS (mkfs.ext3 -I128 /dev/sda5 to get 128KB inodes), and I can see that the Squeeze installer did indeed install Grub2, because I can see the files in their respective directories.
I am having problems installing Debian 7.7 i386 on the newest HP DL380 GEN9 server with P440ar storage array. The disk detection during installation fails to detect the array.
I have pinpointed the problem to hpsa.ko driver to be outdated as I need a minimum version from September 2014. I have already tried following the guide on " [URL]" but the driver compiling from sources fails (guide is from 2012).
Here is where I got the latest sources: [URL]....
Is there any possible way to install this debian version with this storage array? Newer kernel version is really not an option for me.
