Currently I'm running Debian Jessie, and the latest apache, mysql and php, which installed from repository, but I'm want learn jsp too, then if I must switch to tomcat?
First question: Did a bit researching, some saying that tomcat is not the right server, then, how to set my debian jessie laptop server ?
Second question: OpenJDK 7 is installed by default, if it's need to delete it and install Oracle JDK?
I have a question: I'd like to install Debian next to Ubuntu 10.04 on my laptop. I've been searching on the web but I can't figure out what to download and what to install. My laptop is an Acer Aspire 1355LC that runs on an AMD Athlon XP processor. Also when I install Debian, will it recognise my Linksys WUSB 54 wireless device? (I've read somewhere that it could be that WLAN connections aren't supported with the net instal Cd) I know there's a lot that I'm asking, but I really want to learn more about Debian.
View 6 Replies View RelatedUser familai with amd64 for computational chemistry and i386 for desktop. Seeking advice from users who succeeded in arranging a laptop with Debian squeeze or lenny, wireless LAN, 3D acceleration video, flash for speech. The laptop WITH STANDARD USA KEYBOARD should be available from European market resellers.
View 1 Replies View RelatedIs there anywhere to purchase (or a best place to purchase) laptops with Debian pre-installed?
View 6 Replies View RelatedI have an old Hitachi laptop, PII-266, 256MB RAM, 20GB HD, 1024x768 screen. It has a floppy drive, a usb (1) port, and in-built 10/100BaseT ethernet. I cannot boot from USB, or ethernet directly. I would like to boot from floppy and install over network. Is this possible?
View 6 Replies View RelatedUntil a while ago, I had to problems sshing into my laptop, whose static IP is 192.168.1.64. I scp'ed a few files from it to my desktop, whose static IP is 192.168.1.22. Then, suddenly, I started getting a "destination host unreachable" error. I also get the same error when I try to ping the laptop. I verified that the ssh daemon was running on the laptop, and even rebooted, but I am still getting the error.
I didn't install any upgrades or edit any configuration files on the laptop between the time that ssh was working and when it stopped working.
Otherwise, networking works on the laptop. In fact, I am writing this post from it. It is as if my laptop suddenly decided to block incoming traffic.
[Code].....
I've installed years back Debian on my laptop. Last year i did upgrade, i putted an ssd in my old laptop which works great with debian.
Now I bought a new laptop, to replace my old one. Because my new laptop doesn't have an SSD installed, i want to replace the harddrive by the SSD from my old laptop.
Now so said, so done. I replaced the hard drive easy by the ssd. Now if i boot the new laptop with the ssd installed i'm getting message from EUFI/BIOS that there is no OS installed on the ssd???
Debian is installed on it! If a place back the ssd in my old laptop, it's booting like it should, so it's working. Why is EUFI/BIOS think there is no OS installed? Debian is installed on the ssd so it should work i think?
I'm running stock Debian 8.2 with GNOME DE on an Acer ES1-512 series laptop. Whenever I attempt to go into suspend, either by closing the laptop lid or holding ALT when clicking the power button in the top-left system menu on the desktop, my laptop briefly flashes the default GNOME lock screen, fades to black, and then hangs there. Usually, when my laptop would actually suspend, the power indicator light would change from blue to orange and slowly fade in and out. However, now it just sits on blue. There is no way to re-awaken the laptop from this state, and I have to force shutdown by holding the power button.
Running Code: Select allgrep -i error /var/log/messages gives me:
Code: Select allSep 28 17:59:57 debian gnome-session[1188]: [1504:1536:0928/175957:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 18:17:50 debian gnome-session[1188]: [1504:1536:0928/181750:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
Sep 28 21:27:52 debian gnome-session[1188]: [1504:1536:0928/212752:ERROR:channel.cc(307)] RawChannel read error (connection broken)
Sep 29 14:21:51 debian gnome-session[1188]: [1504:1536:0929/142151:ERROR:mcs_client.cc(752)] Received close command, resetting connection.
[code]....
I just want to install debian on mine laptop.
here is mine system configrationhttp://74.125.153.132/search?q=cache:8FAQGq76ttsJ:www.hclinfosystems.com/9100%2520BT.pdf+hcl+lx+infiniti+powerlite+9100+bt&cd=1&hl=en&ct=clnk&gl=in&client=firefox-a
so i want to download the iso image which one i have to download and write.
I cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
[Code]...
I have installed Squeeze on my laptop, an Acer 5315.The fans never turn on, and the laptop eventually overheats and shuts off.This is not a hardware problem, because Lenny, on another partition, works fine.I have poked around, and discovered that the temperature sensor, as reported by "acpi -V", and in /sys/devices/virtual/thermal, does not get updated. It seems to get read at boot, but the reading never changes, no matter how hot the machine gets.
Specifically, if the machine is cool, acpi reports 40 degrees C, and goes on reporting the same number until the machine overheats and shuts down.On the other hand, if the machine is hot (because it's been running without the fan), and I reboot, then the reading at boot is usually either 75 or 85, and the fan turns on during boot, and stays on, at high speed, until the next reboot, and the reading never changes during the whole time
i'm using Debian Lenny 32-bit on my CQ40-115AU. It is always reboot whenever it got too hot. Is there a way to remedy this? I could not find any BIOS setting to disable this.
View 3 Replies View RelatedI'm new to Linux and I'm still trying to make my linux work on an external drive. I think I have found how, but I need to use the pipe symbol in a command line and I don't have it on my keyboard.I've tried different settings for my keyboard and different language, but nothing seems to do; I try all the keys, with shift or alt, but nothing works.I'm working on Debian, Lenny, with a Lenovo 3000 v100 Laptop. Nowhere on my keyboard do I have the symbol I am looking for. I have the vertical bar divided in two, but not the continous one.Do I need somehow to remap my keyboard or add a function to a key?
View 3 Replies View RelatedI'm running Debian Squeeze on my laptop and have a large usb drive to do backups to. Any recommendations on a good backup software? I know I can do tar or rsync but I'm hoping to have a bit more complete option that keeps permissions/symlinks/etc in case a restore is needed.
View 1 Replies View RelatedMy laptop brightness gets set to maximium each boot.
Just wondering if this is the case for other laptop users. I have a Lenovo Thinkpad SL500 (GeForce 9300M GS) and am running Testing.
Ideally I'd like it to remember my last setting (which is usually the lowest). It'd be nice not having to turn it down each time I reboot/power-on.
It actually starts off at a low setting but during the boot process (before gdm and just after the "Waiting for /dev" line I believe) it suddenly gets set to max.
I'm having intermittent network failure on my laptop but I can't figure out why. I have a cable modem and a 10Mb/s (bits) connection (at least that's what I'm paying for). The modem is connected to a wireless router, to which my laptop connects wirelessly. Quite often my speed drops considerably-- sometimes as low as a few hundred bytes per second. Other times it fails completely. This will happen with just about any server you can imagine, including the Debian FTP mirrors in the US.
- When I do file transfers over the local network from my laptop to my desktop, they go pretty fast, around 2 MB/s. I believe my wireless card (Intel 3495) maxes out at 3 MB/s (bytes), so that seems reasonable.
- When I download a file from the outside network, it usually goes pretty fast too, around 1 MB/s, which is close to my limit.
So why is it that the connection between the laptop and the external network is so slow? I've tried power cycling, but it doesn't really help. I can't think of anything else to try.
I have installed Debian a few days ago and when I close my laptop, it goes to suspend, everything is ok but when I try to awake the screen remains off.
I am using Asus X51RL laptop (made in 2007) and it is NOT a hardware problem, suspend works fine in Windows.
I just reinstalled Debian 8.3.0 "Jessie" on my laptop using KDE as the desktop environment instead of GNOME. Using GNOME I had no problems with the keyboard or mousepad but now changing to KDE my keyboard and mousepad won't work. It was obviously working fine during the install but now won't work once I login my desktop. I'm using a USB keyboard and mouse in the meantime.
I've tried going into System Settings->Input Devices->Keyboard and changing the keyboard model. Originally it had installed by default as "Generic 101-key PC", and I tried swapping to "Asus Laptop" but that made no difference. I tried a few other random keyboard models but that didn't make a difference either.
My laptop model is an: ASUS U40SD.
Any commands I can type into bash that could track down the problem.
I am getting a screen resolution of 1280x1024 on my laptop, but I sometimes like the lower resolutions, which are unaccessible via the Screen Resolution program.
View 2 Replies View Relatedi'd like to install the b43 firmware driver on my laptop without internet connection. It requires internet connection to download the firmware-b43-installer...tar.bz2. I have this tar.bz2 on my hard drive, the problem is i don't know how to make debian use that for the install, instead of trying to download it.
View 6 Replies View RelatedI've just installed Squeeze on my laptop (Toshiba Satellite C660D - adapter is a Realtek 8188CE) and was following the instructions on debian.org to set up WiFi. I've changed the source list, done the firmware update and the modprobe, but when I get to step 5 where it says to verify that I have a wireless interface, the output from iwconfig just lists lo, eth0 and pan0, all with "no wireless extensions". Does anyone have any ideas what I should do now?
View 7 Replies View RelatedI have been using debian from the past 3 years on a dell inspiron 1520 (2007 model). Yesterday i bought a dell inspiron 5548 (Early 2015). I have and ssd drive in old laptop that i want to move to the new laptop. To my knowledge i think i can replace the 1TB hard drive on new laptop with ssd, remove or reinstall or update drivers so the ssd will just run fine on new laptop without having to reinstall all the stuff and customization. Should i recompile the kernel in linux for new hardware? AFA windows 7(Dual booting Debian 8 and Windows 7), i think removing and reinstalling drivers will work fine.
Hardware: Old laptop specs: - New laptop
-------------------- - ---------------
Processor: Core 2 duo 2Ghz - Core i5 5th gen. 5200U
RAM: DDR2 667MHz - DDR3 1600MHz
Graphics: Intel GMA X3100 - Intel 5500 / AMD M265 2GB Graphics
Chipset: Mobile Intel GM965 Express chipset - Intel 9 series chipset
My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:
ata1.00: status: { DRDY ERR }
ata1.00: error: { IDNF }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: failed command: FLUSH CACHE EXT
[code]...
And looking in the kern.log I see this:
Aug 16 18:57:00 lap kernel: [ 175.690230] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 16 18:57:00 lap kernel: [ 175.690237] hda: task_no_data_intr: error=0x10 { SectorIdNotFound }, LBAsect=1207959552, sector=18446744073709551615
[code]....
I am wondering if it is possible turn off my display with a key of my laptop's keyboard. I mean if I press ctrl + o then my display turn off and then if I press ctrl + o my display turn on.
My IBM Thinkpad T42 laptop fan is constantly running when the laptop is open.I only use AC power.Fan turns off when laptop is closed, which I did by selecting Suspend in Power Management.
cpufreqd and cpufrequtils are installed. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor' is 'ondemand'
Constant fan was not a problem in XP Pro; I just installed Debian one month ago.
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed)
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
I've installed squeeze (kernel 2.6.32-3-686 now) on an old Amilo M-6100 laptop with a Silicon Motion graphic chip. I've installed Slim and LXDE but Xorg won't start properly. Apparently it doesn't recognize the screen and tries to apply a wrong resolution, no matter what I do. Also, if I try Xorg -configure, I get stuck with a black screen .
I tried to copy-paste data from a xorg.conf file from there: [URL], to no avail.
If you'd care to look at my log file: [URL]
I have an Acer 1551 4755, with Debian Squeeze. Normally my Debian Squeeze installations and suspending work fine on my other 2 laptops. For some reason this one is troubled. I can put into sleep with "pm-suspend" or "pm-hibernate" but the thing is that my laptop never wakes up. I endup restarting.
here is the hardware and module list
[URL]
I am running Debian Squeeze on a laptop and I cannot get sound to work on it. It detects theres 2 sound cards in alsamixer and under cards i see HDA-Intel - HA ATI SB and HDA ATI SB at 0x90400000 irq 16. I think HDA-Intel is suppose to be selected not what is currently selected which is HDA ATI SB. If thats not an issue I'm not sure what is and I've tried reinstalling Squeeze and it still hasn't fixed the issue.
View 10 Replies View RelatedI installed debian stable but after the install i get no sound from the laptop speakers.my laptop is a acer aspire 9800 with intel hd audio.Headphone works correct with sound but not the internal speakers.the speakers are correct working in windows xp.I want a new better system than xp but if debian do not work with my internal speakers then it is a nogo.
View 2 Replies View Related