Debian Configuration :: Laptop Won't Hibernate With SSD In Ultrabay?
Aug 16, 2010
My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:
Installed Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2 [3506.405310] PM: Device usb1 failed to freeze: error -2 This is the result in pm-suspend.log : Initial commandline parameters:
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it). (has worked in ubuntu 10.10)I can hibernate, but when I switch on the system cold boots (it does not restore previous session).Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each block of suspend suspend a block of resume suspend, but hibernate hibernate is not followed by resume hibernate ( I assume that is what is expected.)
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect) I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?
I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.
The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.
The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the
service vboxdrv stop rmmod vboxpci vboxnetadp vboxnetflt vboxdrv
lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
Until a while ago, I had to problems sshing into my laptop, whose static IP is 192.168.1.64. I scp'ed a few files from it to my desktop, whose static IP is 192.168.1.22. Then, suddenly, I started getting a "destination host unreachable" error. I also get the same error when I try to ping the laptop. I verified that the ssh daemon was running on the laptop, and even rebooted, but I am still getting the error.
I didn't install any upgrades or edit any configuration files on the laptop between the time that ssh was working and when it stopped working.
Otherwise, networking works on the laptop. In fact, I am writing this post from it. It is as if my laptop suddenly decided to block incoming traffic.
I have installed Squeeze on my laptop, an Acer 5315.The fans never turn on, and the laptop eventually overheats and shuts off.This is not a hardware problem, because Lenny, on another partition, works fine.I have poked around, and discovered that the temperature sensor, as reported by "acpi -V", and in /sys/devices/virtual/thermal, does not get updated. It seems to get read at boot, but the reading never changes, no matter how hot the machine gets.
Specifically, if the machine is cool, acpi reports 40 degrees C, and goes on reporting the same number until the machine overheats and shuts down.On the other hand, if the machine is hot (because it's been running without the fan), and I reboot, then the reading at boot is usually either 75 or 85, and the fan turns on during boot, and stays on, at high speed, until the next reboot, and the reading never changes during the whole time
i am using kubuntu and my laptop does not hibernate or even sleep whenever i close the lid of my laptop!! i have tried to configure the powersave but it is all in vain!! When i close the lid,the screen goes blank and it deactivates everything including the mouse and the keyboard!
I have been using debian from the past 3 years on a dell inspiron 1520 (2007 model). Yesterday i bought a dell inspiron 5548 (Early 2015). I have and ssd drive in old laptop that i want to move to the new laptop. To my knowledge i think i can replace the 1TB hard drive on new laptop with ssd, remove or reinstall or update drivers so the ssd will just run fine on new laptop without having to reinstall all the stuff and customization. Should i recompile the kernel in linux for new hardware? AFA windows 7(Dual booting Debian 8 and Windows 7), i think removing and reinstalling drivers will work fine.
Hardware: Old laptop specs: - New laptop -------------------- - --------------- Processor: Core 2 duo 2Ghz - Core i5 5th gen. 5200U RAM: DDR2 667MHz - DDR3 1600MHz Graphics: Intel GMA X3100 - Intel 5500 / AMD M265 2GB Graphics Chipset: Mobile Intel GM965 Express chipset - Intel 9 series chipset
I am wondering if it is possible turn off my display with a key of my laptop's keyboard. I mean if I press ctrl + o then my display turn off and then if I press ctrl + o my display turn on.
My IBM Thinkpad T42 laptop fan is constantly running when the laptop is open.I only use AC power.Fan turns off when laptop is closed, which I did by selecting Suspend in Power Management.
cpufreqd and cpufrequtils are installed. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor' is 'ondemand'
Constant fan was not a problem in XP Pro; I just installed Debian one month ago.
I have installed squeeze on a HP notebook. I have one small problem though.It does not resume from suspend. If I shutdown -> suspend, or close the the lid, or shut downs (suspends) as expected, but whenower it backup up, the screen just stays black.Hibernate is working fine.
output of lspci (if needed) 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
I'm running a Debian on a laptop (actually a netbook: Asus EEE 1001PX) as a cheap homeserver. However I'd like it to automatically "shutdown -h NOW" when I remove the AC plug (switch it off at the wall). Otherwise I have to ssh to it and call it myself, and that just sucks Can I somehow detect the removal of AC power and upon that run a script ?
I have Lenovo Thinkpad R400 laptop. It has Intel Centrino Core 2 Duo processor with ATI Radeon 3400 series graphics card and Intel Mobility chipset series 4 Integrated graphics controller. I have Squeeze ( stable) installed on it with kernel 2.6.32-5-686 .
My laptop gets very hot within 10 minutes whether I do any task or not. Also battery life is almost 40% as compared to Windows. I am more worried about temperature as it remains completely cool in windows. Mostly CPU load remains around 10% and CPU spends 99.99% time at 800MHz clock. I believe heat generated is by graphics card chipset.
Following are some information about my machine
$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
On my Laptop, I installed Debian under the file "/" and the partition on which I have all my files under "/var". While this isn't really a big issue, when I originally installed Debian, I had the intention of having all of my files on a partition that I would auto-mount later so that when I upgrade my system by reinstalling it, I would only have to change the system partition and let everything else stay the same.. I can live without changing my /var if I can only do so by a re-install...
I have an acer timelinex 5830tg notebook. After weeks of frustration, i finally have a linux setup that is stable. Thank god for debian. I don't know why I mess with anything else. Anyway, i'm unable to get my built in laptop speakers to work. I get sound through headphone jack, and I hear sound coming from the built in speakers for a split second when plugging in/unplugging my AC adaptor.Let me know if there is any other output needed, which may assist in this issue. Hopefully someone can help me out.
I think it might have to do with an app I installed called Jupiter (http://sourceforge.net/projects/jupiter/) that missed with my power configs, I removed it but I still can't hibernate or suspend. Whenever I try to do either, my screen fades to black and nothing happens. If I move the mouse or touch the keyboard, it comes back.
I'm using xfce, and the power manager settings, to only lock the screen when close, are not honored. The laptop suspends, no matter what, when closed. Is there a way to forcibily only allow xfce power manager to handle the close lid behavior?
I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
I have installed kmilo, modprobed nvram and added line: KERNEL=="nvram", MODE="0666", GROUP="nvram" to 91-permissions.rules. I used command addgroup nvram and add me ( user tomasso ) to nvram group. Kmilo works fine but I am not able to change brightness of my laptop in kpowersave or by using fn key on my laptop keyboard. I am in powerdev group too.
After the mass amount of updates that appeared for Debian, my DVD drive seems to detect a burned DVD I have as blank now. And when i put in the disc, there's two copies of the DVD drive on Computer, both of which are labeled CD/DVD Drive: Blank DVD-ROM Disc. I have gone in to disc manager and found that it is possible to mount the volume on the disc, and on the second icon it will appear and work. However, this is annoying having two icons.
Now, when I don't have a disc in there, it only shows one drive. My PC may have messed up during the updates, because I just let it update in the background while my sister was using it to show my mom's friends pictures and she randomly closed out of one of the windows without asking me anything (ffff), so that may have messed something up. Does anyone know how I would go about fixing this?
