Debian Multimedia :: Xorg Won't Work On An Old Laptop?
Apr 3, 2010
I've installed squeeze (kernel 2.6.32-3-686 now) on an old Amilo M-6100 laptop with a Silicon Motion graphic chip. I've installed Slim and LXDE but Xorg won't start properly. Apparently it doesn't recognize the screen and tries to apply a wrong resolution, no matter what I do. Also, if I try Xorg -configure, I get stuck with a black screen .
I tried to copy-paste data from a xorg.conf file from there: [URL], to no avail.
I am running Debian Squeeze on a laptop and I cannot get sound to work on it. It detects theres 2 sound cards in alsamixer and under cards i see HDA-Intel - HA ATI SB and HDA ATI SB at 0x90400000 irq 16. I think HDA-Intel is suppose to be selected not what is currently selected which is HDA ATI SB. If thats not an issue I'm not sure what is and I've tried reinstalling Squeeze and it still hasn't fixed the issue.
I'm running Debian Squeeze on my laptop my laptop speakers do not work but when i plug in something into the headphone jack I then have sound (to the speakers plugged into my headphone jack).
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code: Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection
I recently installed debian on my ibook G4, but when I start up the computer, it doesn't boot into Xorg. When I tried to start Xorg, it says that it is not installed. How would I install it, and how would I start it? When I do the apt-get install xorg, it doesn't work. Right now I'm running ubuntu on it, but I really want just plain debian, as I really dont need all of the bells and whistles that Ubuntu offers. I just need something to do schoolwork on (I'm a highschool sophmore), and I don't want to use OS X for that as I like linux better (specifically debian and ubuntu).
I tried to install Debian 7 on a PowerMac G4, but when I try to start X, the screen simply goes blank and nothing happens. My GPU is a Radeon 7500 RV200. I tried using nomodeset and setting the resolution manually, but the same thing always happens: the screen just goes blank.
I just upgraded my Debian Etch to Lenny. After doing so, Xorg displays no fonts. I get only rectangles. This occurs in the Login Screen and after logging in. The only thing that is readable are the contents of a terminal (even gnome-terminal). What can I do to solve this Problem? The Xorg.0.log doesn't give me any clue on what's the problem.
I know this is usually with the intent of multiseat systems. I am not interested in setting up a multiseat system. What I am interested in configuring on using the console and jumping back to X session, not the other way around. Is this possible if your default desktop environment GNOME and configure GDM to do this with the novtswitch parameter mentioned here? [URL]..
I tried even playing around with Xorg, finding out from the man page Xorg server-1.4.2 it does not even have novtswitch functionality compiled X does, but I am not sure I am configured it properly, specifically because I am not doing multiseat. Does anyone have background on this to give me some guidance? I have attached the relevant conf files and logs. Let me know if more is needed. In my test environment, it switches VT anyway and the keyboard does not work. I assume my Xorg binary is not compat for this, but am I even on the right track? I did not expect the kb to go out like it did.
I started with a Pentium4 system with a FX5500 AGP card and now have a i3 with integrated Intel video (Auburndale). The new motherboard is ASUS P7H55-M PRO. The monitor is a Acer AL1916 (LCD) with only VGA input. I have been using the nVidia oprietary drivers installed the "Debian way" (Cf using a Debian stable stock kernel.I first renamed xorg.conf so X would start without one. Once gdm starts, the monitor says the input is not supported. So I tried reusing the old xorg.conf file, changing the "nvidia" to "i810". X then fails to start and shows an error of no screens found.Everything is fine in text mode; only X is not working.I have to get this fixed very quick or I might not get to use Linux at work anymore.
My laptop has a S-video TVOUT which I would like to use to show content on my tv. After plunging through a lot of documentation I can't get it to work.
Some config:
root@pluim-nielsen-laptop:~# xrandr --verbose Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096 LVDS1 connected 1280x800+0+0 (0x43) normal (normal left inverted right x axis y axis) 331mm x 207mm Identifier: 0x41 Timestamp: 6237460 Subpixel: horizontal rgb
My hp does not want to start X for some reason. I have so many errors. I made an account to just see this problem be fixed. Now when I type "startx" I get back, "bash: /usr/bin/startx no such file in directory". I have to use GRUB due to the fact I forgot my login. Although, I do remember my password.
I am pretty new to using Linux, I am currently trying to configure 3 monitor's with Xorg in Debian Wheezy. I have 2 video cards in the PC and one has a Dell Y-splitter to connect 2 monitors. 2 monitors are 1920x1080 resolution and the other is 1280x1024.
LSPCI Code: Select all00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
I attempted to write my own xorg.conf file, but that resulted in the machine booting to single user mode and the xorg startx error log said it could not find any devices.
When I used the xorg.conf.new generated by the "xorg -configure" command, I was able to get it to display as 3 independent screens, but there was overlap on the screens. I.E. if you moved the mouse to the right side of one monitor, it would show on the left side of another screen at the same time.
I've freshly installed Debian Lenny 5.03 with xfce from cd, but I'm having intermittent problems with X. Mostly X will startup fine, but occasionally it crashes. If I'm lucky, it will just shutdown and just return me to the text-mode login. But if I'm unlucky, it freezes completely, such that even the alt-SysRq key combos won't work.
where I'm using a default xorg.conf file of... [URL]
and the respective Xorg.0.log files are
a) for when xorg runs okay... http://pastebin.com/h0rbti1U b) for when xorg crashes to textmode... http://pastebin.com/f7B6SgKf c) for when xorg freezes up completely... http://pastebin.com/gydNkJFf
I am new to Linux and installed Debian. After the Installation I started Debian and ended in a black screen. I came out there changing to a terminal (ctrl+alt+F1) but I dont know how to get Xorg running. I am using the Mainboard:Gigabyte GA-D510UD without any extras (means just the Mainboard with Ram and an IDE Hdd). here is the Log file from Xorg [URL]... System Information is in the log.
The X server in Debian seems to have a "funny" habit to suddenly start blanking the screen if I don't touch the mouse or the keyboard for a while, although I've used the xset command (xset -dpms s off) in my ~/.xinitrc to tell Xorg specifically NOT to blank the screen. I know how to disable screen blanking in /etc/X11/xorg.conf, but I'd rather not have the xorg.conf file at all.
So, I'd be interested to hear your suggestions about how to disable the Xorg screen blanking without using the xset command or the xorg.conf file. Is there some other file in /etc/X11/ that I could tweak to disable this highly annoying desire of Xorg to insist on blanking my screen after a bit of idle time?
I have a couple of questions and one problem regarding my AMD64 Testing box. According to this Debian Xorg Wiki : Xorg is the default X Window server since Debian 4.0 (etch). It replaces XFree86 and is maintained in Debian by the XStrikeForce. But...it appears that I don't have Xorg as my X Window server, but rather XFREE86? I just checked my i386 Testing box, it does have /etc/X11/xorg.conf
[Code]...
The problem: I have lost my higher screen resolutions after today's apt-get dist-upgrade. I only have 800x600 and 640x480. I probably won't complain about these resolutions in twenty years or so, but for now, I'd rather get the higher resolutions back, ha.
After a install on a old Toshiba today everything looked fine. But when i tried to start Xorg it start but doesn't use my whole screen. It is not a resolution problem it just doesn't use the whole screen. Hopefully this explanation is understandable. On lenny i had the same issue but once i changed the console resolution size in grub everything was fine. Sadly this is not the case with squeeze. I already tried "X -configure" and had a look at the generated xorg.conf (posted below)
[code]....
After that is tried to run the generated xorg.conf but then it just frooze.
I'm running debian 2.6.32-5-amd64 and have spent an interesting day trying to get nvidia-glx running...What appears to be happening, is that installing nvidia-glx uninstalls X.I've tried various installation methods (Synaptic, apt-get, module-assistant) and the final result seems to always be /usr/bin/X not found.Re-installing X blows away nvidia-glx.The symptoms look a lot like this post: viewtopic.php?f=7&t=45188Is it possible that this problem has returned?
I'm now working to install Debian 8 on another computer since yesterday. Another Linux, and as always, endless list of problems.
- A computer that was freezing at every installation attempt (but never at the same moment) during installation when the Broacom cardbus adapter was connected (it's a chance that it is easy to remove and I found it quickly... and it is working once installation is finished)
- Turning to sleep mode after 15 seconds if I don't quickly try to login
- BOINC receive no work
- Tray icons are here but invisible - no icons, just gray space
- xserver-xorg-video-savage is installed, but I have resolution problems, and weird glittering horizontal lines when the computer is working (as on my other PC with the SiS video card).
On Debian 7.8, it was working fine for having the 1024x768 native resolution of this laptop screen.
But, with debian 8, the max resolution is now "800x600" and with this screen, there is no smooth effect : the image is a disaster.
Here is "lspci -nn" :
Code: Select all00:00.0 Host bridge [0600]: VIA Technologies, Inc. P/KN266 Host Bridge [1106:3156] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091] 00:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972] 00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] 00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
[Code] ....
How to confirm that my Video card is included into xserver-xorg-video-savage package ? How do I know if the driver is loaded ? How to modify xorg confifugration files in this modern flavour of Linux in order to force adding the 1024x768 resolution ? I already succeed into /etc/default/grub and "update-grub" for the bootloader screen but I want it too in the desktop environment.
I have Lenovo 3000 n200. I'm new in debian, but it's great to me! I wan't to stay with this distro, but i Can't upgrade this to testing or unstable version. Lenny have too old packagges for me. All versions of squeeze (downloaded or upgrade from lenny) is broken. I can't run xorg. For about 2 weeks i'm serching for answer and i only found that this is xserver-xorg-conf. That's true this is the package that is broken, but cannot install this.
When i upgade system the synaptic package manager write me one package is broken (xserver-xorg-conf), so i delete it and install one more time. This same problem. So i downloaded and i have this same problem. When i restart system i cannot run xserver and gnome.
I experienced this problem on Friday but didn't have time to write a warning.A couple of days ago, xserver-xorg-core 2:1.10.2-1+b1 reached Testing before a corresponding dependency (recommendation), thus breaking the hardware acceleration. The issue is (better) described here (1) by a developer.A possible solution is to keep (2) the previous version (2:1.10.2-1) or, if you already installed the faulty one, to grab the former version from Debian Snapshots (3) and downgrade the package.Because the error was a simple path change, one could also keep the new version of xserver-xorg-core and link the DRI Mesa modules to the directories that are inspected now (as described here [4]).The issue has already been addressed (5) and a new version should appear in Testing shortly.[URL]
I've been struggling to get my sound to work properly in my HP dv7 laptop in Ubuntu 9.10 64-bit.
If I follow the instructions here [URL] then I can get my microphone to work.
My speakers worked fine right out of the box, but the headphone jack does not. When I follow the instructions here [URL] and install the alsa backports then my headphone jack works properly, but when I shutdown my computer I get a loud crackling/popping sound. Uninstalling the alsa backports stops the crackling, but then the headphone jack doesn't function.
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.
I have installed Ubuntu 9.10 on my laptop Lenovo T60. The problem is i can't make extended monitor in that way: laptop 1024x768 and Monitor LG L1952HQ 1280x1024. If i make this configuration, screens appear black and i can't go back without restarting. Presently system support only: laptop 1024x768 and LG L1952HQ 800x600. This configuration (laptop 1024x768 and LG L1952HQ 1280x1024) worked well previously with the same ubuntu 9.10 before reinstallation. I guess i should reinstall ore change to other video drivers? The refresh rate is set on 60 Hz.
