Ubuntu Installation :: Upgrade To 10.10 Broke Surround Sound - No 5.1 - Only Stero
Nov 7, 2010
I upgraded my ubuntu installation from 10.04 to 10.10, now surround sound (5.1) does not work in xbmc, or in another player such as vlc. Only the front two speakers work. I noticed pulseaudio and alsa are installed. I thought i removed pulseaudio once before but cant really remember. In the sound configuration preferences thing (prefs >> sound), i have hdmi output selected (hdmi goes from the HTPC to the amplifier). It only plays audio in 2.0 instead of 5.1. I tried selecting the analog 5.1 sound option, but none of the test sounds work. However i noticed vlc still played movies with audio, but only stero no 5.1.
Previous to the upgrade, i had 5.1 working fine in xbmc, never bothered to check vlc since it was all good. Also, when i go into alsamixer, it does not show any rear speakers, it just shows a front speaker and a bunch of other stuff, like headphones. I'm not sure what other output you guys need, but let me know and i'll get it. Here is the alsa-info.sh output for my HTPC: [Code]..... Another note, after i reinstalled pulseaudio the first time, vlc fails to display a 5.1 movie and still plays tero output.
View 2 Replies
ADVERTISEMENT
May 1, 2010
Just upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies
View Related
Jun 22, 2015
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp
Running the server...
Trying JACK...
Trying ALSA...
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Trying OSS...
[CODE]....
Should I have a normal alsa-base.conf file?
View 3 Replies
View Related
Feb 22, 2010
I have on-board sound on a EVGA nForce 750i FTW edition motherboard, not sure if you need the board type, but I'm not getting any sound out of my headset which is a Razer Barracuda 5.1 surround sound. link me to a very basic tutorial video/text document for Ubuntu Linux.
View 1 Replies
View Related
Feb 7, 2010
I upgraded yesterday ubuntu 9.10 to 2.6.31-19 kernel. After reboot, I get stack to GRUB black screen. No possibilities.
My set-up is triple boot 9.04, 9.10 and winxp. The MBR is handled by win boot.ini with no problems. Each ubuntu partition has a grub installed in it.
9.04 is on sda5 with grub installed on it ext3
9.10 is on sda9 with grub2 installed on it ext4
I am able to boot into sda9, via grub of sda5 obviously passing the correct kernel parameters and UUID.
View 3 Replies
View Related
Apr 10, 2010
I upgraded to 9.1 and now my web browsers are not working properly--FireFox would not connect to certain sites, others worked fine. I installed Chrome and it worked for a short period--now none of my browsers work at all and package install manager does not work. Overall performance is much slower than before upgrade--boot time is about 4 times slower. I'd like to fix this build because I had it tweaked just the way I liked it before the upgrade--it was working great and now I'm sorry I upgraded there any hope or should I just start with a fresh install of 9.1 or even the previous version
View 2 Replies
View Related
Sep 23, 2010
I just updated my kernel to 2.6.34.7-56.fc13.x86_64 last night and now I have no system sounds. Audacious plays my mp3's just fine, just as all my multimedia works in my web browser, vlc, etc... The only thing being affected is system sounds. I tried playing a sample with aplay and I got loud, crackling nonsense and this output code...
View 4 Replies
View Related
Jun 4, 2010
I just updated my kernel from 2.6.32-21 to 2.6.32-22 today. Now I am getting no sound. I have checked my mixer levels with both kmix and alsamixer. Nothing appears to be amiss. I tried rebooting with the old kernel and still no sound.
View 2 Replies
View Related
Mar 17, 2010
I just did the latest upgrade in 9.10 via the update manager and it required a reboot. When I rebooted Ubuntu failed to load. In recovery mode it fails saying that it can't find my root device and has some suggestions about what might be wrong. I looked at the file it listed in /proc/something and the devices available by uuid in /dev/ and what's listed in /proc/something isn't in dev. I haven't made any changes yet for fear of causing worse damage. The shell it bumps to is ASH and it doesn't look to have much editor support to make changes to the proc file(ECHO > ?). Is there a safer way to get my system back online?
I'm running 9.10 AMD64 on a Dell Inspiron laptop with a dual boot to Windows 7 (For browser testing web apps/sites)
View 9 Replies
View Related
May 13, 2010
Since my distribution upgrade to 10.04 my VirtualBox guest of XP SP3 will not boot, it bluescreens and reboots. I can boot the guest in last known good config and in safe mode but I have no CDROM. I attempted a tools install over the lan but that resulted in the same blue screen. Tried installing the virtualbox-3.2 beta package and guest tools and had the same results..
View 1 Replies
View Related
Jun 23, 2010
I had a working workstation with Karmic. Then I decided to upgrade to Lucid. Bad move, it turns out.First the upgrade crashed. Just stopped doing something for hours on end, and I eventually had to reboot. After that, I had to apply lots of apt-get and dpkg love to get the machine to book. Now, I *think* I have a Lucid system, at last. Only that it doesn't work where the Karmic system used to...Our setup uses kerberos and autofs. To begin with, the upgrade lost my /etc/krb5.keytab (making it impossible to log in), but that can be easily replaced.Now, I can log in, but my home directory doesn't get mounted. In /var/log/auth.log, I get this:
Code:
Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): pam_sm_authenticate: entry (0x0)
Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): (user hans) attempting authentication
[code]....
View 1 Replies
View Related
Oct 11, 2010
So after I upgraded to 10.10 some of my compiz plugins stopped working. Atlantis and anaglyph give me an error like this when I enable them in CCSM (I ran compiz from a terminal to see the output):
Code:
compiz (atlantis) - Error: InitObject failed
compiz (core) - Error: Couldn't activate plugin 'atlantis'
View 1 Replies
View Related
Mar 4, 2011
I ran a system upgrade today and it froze at "unpacking replacement libpango1-common". It just wouldn't go on. The upgrade kept on showing "unpacking replacement ..", the process used zero CPU time, so I killed it, removed the lock and after Synaptic asked me to, I ran sudo dpkg --configure -a. Now I can't install anything. Everytime I try to, I get an error telling me I should run "sudo apt-get -f install", however, whenever I do that, another endless installation of libpango1.0-common starts. I tried various things like installing that package manually, removing it and so on, but nothing helped. Any advice on how to get my package installation system working again is warmly welcome.
View 2 Replies
View Related
May 2, 2010
Upon upgrading from Karmic to Lucid, Everything comes up, seemingly fine. Once logged in to the OS, my three monitors show the desktop wallpaper as well as all the icons on the desktop. A few programs that I have set to autostart do so.
However for some reason, I can only access one of the three monitors. (And not the one with the gnome-panel.) As soon as I drag my mouse from my third monitor onto the one next to it, I loose complete control of it, and it starts dancing all over the place. If I try to drag a window from one screen to the next (using Alt-Left CLick + drag and not moving the mouse onto the other monitor), the the app goes from one side of the working monitor to the other side (like it's wrapping around). Though I can see it on the other monitor for a little bit until I get it far enough for it to wrap.
Here is my xorg.conf:
Code:
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[code]....
View 4 Replies
View Related
May 25, 2010
I had the Adobe flash plugin working under 09.10 in Firefox; now after the upgrade to 10.04, it doesn't work.When I go to a web page with flash video, I get the message "Some plugins are not installed" and video will not display. I click on the button to install the plugins and select Adobe Flash. I get the message "Package is already installed." I go back to the web page and the same thing happens again.In Ubuntu Software Center I see that package restricted-extras is installed.
I tried going through Tools / Add-ons in Firefox, but the list of add-ons wouldn't load at all that way.I also tried going to Adobe's web site, but for versions of Ubuntu 09 and later it offers an "APT" file instead of a .deb. Firefox asks what application to use to open an "APT" file and I don't know what to tell it... I'd be fine downloading a .deb or using apt-get or Ubuntu Software Center though.
View 5 Replies
View Related
Aug 18, 2010
I beleive I had version 9.x installed. I upgraded once and everything was fine. I went the upgrade manager again and it found some more upgrades. The upgrade messed with grub. It then told me there were no new upgrades. Then I rebooted and it says
Try (hd0,0): NTFS5
Then the screen clears and there is some text I can't read and then it says command not found. Then it reboots.
Is there a way to fix this?
If not is there a way to recover the files from the disk image file.
View 1 Replies
View Related
Oct 17, 2010
i wanted to upgrade my ubuntu system to meerkat beta via update manager like i upgraded it the last 5+ times.
a bug showed up that i can recall from updating files previously: some software installtions via update manager triggered the programm nicotine+ (i think is was something like man-lib or man-db that, when called by the installtion programm, would trigger nicotine too). since i can close that nicotine+-window and the installation process isnt bothered any further i didnt mind.
now with this upgrade, i had to close nicotine+ around 5 times since it got triggered together with some of the files that got updated/installed in this upgrade.
and then what happened: GError something about an "unrecognized image file", it concerned a py file that was named "nicotine"...
so i waited for 10 mins and figured out that the update process had stopped. i couldnt resist and logged out, wanting to delete nicotine from my system and to reinitialize the upgrade. well, nothing works since then, grub only lets me choose different kernels which didnt help much as there was no way to startx.
my question is:
how can i reset this upgrade mess or bring this pending upgrade to an end? can i do an upgrade via network, based on the emergency shell that comes up in some kernel-recoverymodes? or should i burn a livecd, boot it and then do what? repair? try another upgrade? delete nicotine?
having 'consumed' ubuntu for years now i still wouldnt know what else to do then posting here.
View 1 Replies
View Related
Jun 21, 2010
Ever since I upgraded, the touchscreen on my Fujitsu Lifebook P1610 no longer works. On Karmic, it worked out of the box without installing any extra packages.
I see xserver-xorg-input-fpit in Synaptic Package Manager but it conflicts with netbook remix packages for some reason so I haven't tried installing it.
I didn't see anything in dmesg about the touchscreen but there are Xorg errors:
Code:
...
(II) config/udev: Adding input device Serial Wacom Tablet (/dev/ttyS0)
(**) Serial Wacom Tablet: Applying InputClass "Wacom serial class"
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
[Code]....
I'm not sure if it's supposed to be recognized as a wacom tablet or what, and I'm also not sure how it used to be configured when it worked in Karmic.
View 6 Replies
View Related
Jul 4, 2010
I recently updated the kernel to the newest version(2.6.32-23-generic) using the update manager and now I am unable to boot in to my Lucid installation.
My setup is LVM on top of a RAID 0 array. My computer had been running in this configuration since Lucid was released.
The Error Code I get on Boot is to the effect of: /dev/mapper/ubuntu-os is not available.. and then I get kicked in to Busy Box.
Once in Busy Box if I try to use mdadm to mount the RAID array I get this error:
If I boot in to the live CD I can mount all of the partitions and LVM volumes, so it does not appear to be a failed drive or volume.
I have looked in the mdadm.conf, lvm config and grub config files and searched the "Google" for an answer with no-avail...
Ultimately I would like to find a solution which doesn't involve a re-installation.
View 6 Replies
View Related
Jul 16, 2010
Alsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 6
; default-channel-map = front-left,front-right
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
View 8 Replies
View Related
Sep 29, 2010
i recently migrated from windows to linunx
Motherboard intel gccr intel hd auduio My 5.1 sourround sound is detected as stereo in ubuntu i tried alsa and other stuff how to condifure it
View 1 Replies
View Related
Apr 24, 2011
I've got an old Philips 5.1 surround sound system and I'm just wondering how to set it up.Everything's hooked up properly (I think) but it's journeyed to no avail. I'm actually wondering if it's possible. I haven't got a surround sound card. I simply have a twin audio RCA to stereo cable plugged into the sound card.I've set the hardware in sound preferences to Analog 5.1 Surround. Here's the contents of my /pulse/daemon.config
Code:
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
[code].....
View 1 Replies
View Related
May 11, 2011
I have a 4.1 surround setup that the computer sees a 4 channel setup (stuff going to subwoofer is split out in hardware so all the computer sees is the front and rear l/r channels).
All well and good, but phonon isn't giving me an option to set my output to 4 channels, only stereo (which means my rear speakers are useless) or 5.1 (which makes me fear losing channels if I play anything with actual surround sound).
View 3 Replies
View Related
Apr 23, 2011
I cant get sarround on pulseaudio
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
I have 5.1 speaker, sound is only from front, front left && front right and from subwofer its no sound from rear left and right.
View 6 Replies
View Related
Mar 5, 2010
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
View 3 Replies
View Related
Jun 4, 2010
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies
View Related
Jul 22, 2010
I just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
View 9 Replies
View Related
Oct 4, 2010
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code:
Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[Code].....
View 9 Replies
View Related
Nov 13, 2010
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
View 1 Replies
View Related
Jan 2, 2011
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
View 1 Replies
View Related
