I installed a package (kicad) on my wheezy system using apt-get and it pulled down a shedload more files than I expected.When I restarted the system it turns out I've also been upgraded to
Release 8.0 Jessie
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
However I don't have gnome any more. Only XFCE.I tried
Reading package lists... Done.Building dependency tree.Reading state information... Done.Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following packages have unmet dependencies:
gnome : Depends: gnome-core (= 1:3.14+3) but it is not going to be installed
Depends: evolution (>= 3.12) but it is not going to be installed
Depends: evolution-plugins (>= 3.12) but it is not going to be installed
Depends: gnome-shell-extension-weather but it is not going to be installed
Recommends: gnome-software but it is not installable
E: Unable to correct problems, you have held broken packages.
My /etc/apt/sources.list is
Code: Select all#
# deb cdrom:[Debian GNU/Linux 7.7.0 _Wheezy_ - Official amd64 NETINST Binary-1 20141018-13:04]/ wheezy main
#deb cdrom:[Debian GNU/Linux 7.7.0 _Wheezy_ - Official amd64 NETINST Binary-1 20141018-13:04]/ wheezy main
deb http://mirror.waia.asn.au/debian/ wheezy main
deb-src http://mirror.waia.asn.au/debian/ wheezy main
Under wheezy, I could set gnome-terminal profile to partial transparency, i.e., to display the desktop wallpaper behind the text. (E.g., a picture of my girlfriend.) But after upgrade to Jessie, this option completely disappeared, and now I can only pick a solid color. Do I need to flip a setting or something to get this back? Am running default Gnome desktop (not fallback mode) though I think I only have 2D acceleration.
I run Debian with Gnome on a beat up workhorse ThinkPad. I upgraded to Jessie last week with just one issue. Before the upgrade, I could plug in a USB drive (I use a couple of WD MyPassports most often) and they would mount, read, and write without a hitch.
Since the upgrade, when I plug in a USB drive, the file manager (3.14.1) sees the drive, but when I click on the drive to access/mount it, I receive a dialog box reading: Oops! Something went wrong. Unhandled error message: Error when getting information for file '/media/user/MyPassport1': Input/output error.
If I hit the little “eject” button in the file manager, then mount the drive as root from a command prompt [e.g., mount -t ntfs-3g /dev/sdb1 /media/external] I can run a directory of the drive, but ls -l /media/external fails. From the command prompt I am unable to perform reads or writes to the drive.
Rebooting into recovery mode (i.e., without Gnome), I get the same behavior with CLI messages reporting I/O errors with the drive. I can run a directory, but ls -l, reads, and writes fail.
This behavior is the same on all three USB ports. It is not limited to these MyPassport devices.
The drives work flawlessly on another headless machine upgraded to Jessie the same day. And on another still running Wheezy.
If I boot the ThinkPad from a live CD (Mint 14, I believe) the USB drives mount, read, and write fine.
My BIOS is up to date, 1.52.
lspci -v says this about USB ports:
Code: Select all00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at 1880 [size=32] Capabilities: [50] PCI Advanced Features Kernel driver in use: uhci_hcd
- Debian boots normally - I get the login screen - Once my credentials entered, I see only the grey foreground of the login screen for a couple of seconds, then a black screen with a prompt for like half a second and then I'm back to the login screen. No error message, nothing.
When booting in recovery mode and use startx, it works fine (it's my setup at the moment). From there, if I start gdm3 (systemctl start gdm.service), I get the black screen with a prompt and I can do nothing, I have to shut down directly by pressing the button.I tried to add Debian-gdm user to the video group (even if I don't use nVidia drivers), to replace gdm by lightdm and even to remove any display manager but the issue is not solved.Here are some outputs:
Code: Select all# dpkg-reconfigure gdm3 Job for gdm.service failed. See 'systemctl status gdm.service' and 'journalctl -xn' for details. invoke-rc.d: initscript gdm3, action "reload" failed Code: Select all# journalctl -xn -- Logs begin at Tue 2015-12-29 19:16:26 CET, end at Tue 2015-12-29 20:20:55 CET
[code]....
Since removing gdm didn't change anything, I assume it doesn't have anything to do with it but still.
I recently upgraded from 9.04 to 10.04 and things went pretty smooth. The only real issue is that I lost the transparency settings for the menu & indicator applets on my top knome panel. I simply don't remember how i did it last time, and i've been searching the net for an hour for a solution with no luck. Many results suggested the use of the Compiz Settings Manager's opacity settings, but that opacity applies to everything, including the text & icons. I thought i used the "gnome color chooser" package to do it last time, but I cannot find the option in the gui. how to make the background of the menu (applications/places/system) and indicator applet have transparent backgrounds while retaining full text/icon brightness?
I am a experienced Windows person and my roots go back to DOS and the first version of windows. I am pretty good with computers but have little to no experience with Linux or Unix. About 30years ago I managed to make a painful transition from DOS and xTree Gold to Windows 3.1. Now I am leaving Windows behind forever...
I have installed Debian Jessie from a DVD that was made with the debian-8.1.0-i386-DVD-1.iso.
I have it installed and running with the Gnome desktop and now want to use the KDE desktop. As I understand it I have the files for the KDE desktop in my install and I see some KDE files the in the Packages app. But I don't know what I have, where it is, or how to use it.
I just cannot figure oout how to get the KDE desktop installed and running. If it is practical I would like to keep Gnome for now, switch to KDE as the defaultdesktop.
I have spend some hours googling and searching this forum and cannot seem to find anyting on switching or changing desktops from and with the Jessie install.
And if it can be done from Gnome that would be easiest for me because I am not much of a command line person yet and don't have a manual for doing that yet. But can use a terminal and enter commands if they are stated.
Installed Jessie and added the Nvidia Proprietary drivers. All looks good.
When I open the Gnome Tweak Tool it appears to be working fine but won't change anything. If I click on a check box the check appears for a split second and then disappears. Tried re-starting a few times, same. Haven't found anything relevant on the net yet.
After I upgraded debian wheezy to debian jassie I cannot find how to switch off the computer from GNOME and XFCE. On GNOME I even cannot see a logout button. Where is it hidden?
prior to showing the GNOME user logon screen. Unfortunately, all information I seem to be able to find on this appears to be relevant for pre-systemd Linux only.
The situation is that I have two monitors: One small tilted monitor on the left with 1024 x 768 which should be secondary and one larger landscape monitor on the right with 1920 x 1080 which should be secondary. Everything works persistently AFTER a user has logged on. However, after booting the system or after changing users, the small monitor becomes primary so (a) the user needs to logon using that monitor and (b) as the monitor is physically tilted, one needs to tilt the head to read it wihtout the xrandr commands.
If I can get beyond this issue, there is a second issue: While one can pick the primary and secondary monitor in Gnome, monitor numbers 1 and 2 seem to be fixed. This becomes a problem when using freeRDP to connect to a Windows server with dual monitors. Then, the smaller, secondary monitor is number 1 and thus, it is the Windows logon and primary screen. Is there a way to switch numbers 1 and 2 in Linux, for example somewhere in the grub configuration?
I upgraded my Wheezy 7.8 to make sure all packages were installed Before taking the next step to upgrade to Jessie.I upgraded to Jessie and it seemed to run OK....but after reboot I had no network Connection..I checked ifconfig and the wrong network card mac address is being assigned to the wrong card....?I have a clonezilla server on my server, so this was my network interfaces before and after upgrade
Code: Select all# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback
[code]...
I even checked nano /etc/resolv.conf and sure enough my gateway was the same for my Internet eth0.When I ran ifconfig I could see that the eth0 mac address was set as eth1..I tried to reset my drbl for clonezilla but that only sees the vmware Connection and not my actural cards.. have taken alook at /etc/udev/rules.d/70-persistent-net.rules and the assignment is right but not ifconfig?
With "quiet" removed from the grub linux line, I'm getting the following error messages when the boot hangs up early in the boot process (19.768231 seconds into boot).:
input: HDA NVidia HDMI/DP,pcm=3 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 input: HDA NVidia HDMI/DP,pcm=7 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 input: HDA NVidia HDMI/DP,pcm=8 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
/etc/gdm3/Xsession[3408]: ![1433316153,000,xklavier_evt_xkb.c:xkl_xkb_process_x_event/] #011ATTENTION! Currently cached group 0 is not equal to the current group from the event: 1
Using x11vnc server on Debian host, and TightVNC viewer client on Windows 7. All was working fine until a server host upgrade, from Wheezy to Jessie. Now, when I try to connect, TightVNC retrieves the certificate as normal, compares and accepts it, and starts stunnel. The next step would normally be to prompt for the VNC password.
Instead it gives an error:
ReadExact: Socket error while reading.
I'm guessing that some thing is missing or misconfigured after the Jessie upgrade, which broke many other things too, as Debian upgrades always seem to do. I have removed and reinstalled the x11vnc package, no effect.
The errors in the log file don't mean a lot to me.
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 2275.960] X Protocol Version 11, Revision 0 [ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
I did an in-place upgrade to Jessie today and I can only get the GNOME Classic desktop, which I have to select when I log in. I had started to get used to the default desktop in Wheezy, so I'd like it back if possible. When I select gnome system default, I get my desktop, but no menus or anything I can click on at all. All I can do is ctrl-alt-delete and reboot or shutdown. I run it on a Lenovo Ideapad U410.
I have did a clean installation of Debian Jessie today on my laptop and my computer.I use the Gnome 3.14.1 Desktop environment.
I installed Spotify-Client via PPA, and i installed the gconf-editor, gufw and Google Earth. Those 3 applications are not visable in the Gnome applications menu.
If i run then via the terminal, e.g. spotify-client, gconf-editor, gufw and google-earth, the applications are started. They seem to be installed correctly. I tried either running apt-get purge spotify-client gconf-editor google-earth-stable gufw, and reinstalled those applications, to no avail.
I even tried installing another desktop environment, mate-desktop. The shortcuts to the applications do exist in /usr/share/applications. Only not in the Gnome 3 menu. It's strange, because this problem happens both on my desktop and my laptop computer.
I run: Debian Jessie 8.2.0 with Gnome 3.14.1. Kernel 3.16.0-4 amd64 architecture
I also tried reinstalling Gnome-Shell and GDM. But it doesn't work.
Before, Debian Wheezy 7.9 was installed, and there was no problem. My Debian installation is fully up-to-date.
I have Jessie 8.3, netinstall and GNOME base. I want to switch to MATE and my question is hot to do it correctly.
I think it is impossible to do it by installing firstly MATE and the GNOME - both desktops should be crashed.
How to remove completely GNOME to be without any desktop environment? I can go to thext mode and run commands to delete the desktop but there is something more that I should do?
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake Supports Wake-on: g Wake-on: g
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
is it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
I upgraded my laptop from Debian Wheezy to Jessie the other day, and just as before my wifi auto-connects to my router, and I can "ping http://www.google.com" just fine, but only for like a minute. Then the Internet access dies, but I'm still connected fine to my router, and I can ping its IP address. If I connect to the router through cable / eth0 everything works just fine, and I have full Internet access.
I assume there is something wonky with how ip address is assigned after the upgrade, how can I fix this, or trouble shoot further?
I have an asus eee 1015px, which was running dualboot windows and wheezy with no problems (except the browsers seeming to take up a lot of CPU). Today having backed up everything, I wanted to upgrade to jessie. URL...
Everything seemed to be progressing fine, no strange messages, it took 1 hour for
Code: Select allapt-get upgrade
but maybe that's normal. However, then when I did
Code: Select allapt-get dist-upgrade
It froze at 17.30 with a weird screen. The sort of thing you never want to see on an install, a sad face and blocks instead of text. pic: URL...
Then it moved on and gave a readout, which seemed pretty ominous pic: URl...
It then moved and gave a readout, hanging again: pic3: URl...
Now it seems to be in loop, moving on every 15 minutes or so but always ending up with the same screenful of text shown in the foto below, which ends with the last line reading like this:
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Playback open error: -2,No such file or directory Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp Running the server... Trying JACK... Trying ALSA... ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Trying OSS...
I'm running a Debian derivative (Voyage linux).With the latest version based on Debian 8.0 Jessie and kernel 3.14.12 I have frequent pops, clicks and stutters in sound played through a USB dac, especially with higher resolution files. A previous version of this distribution worked fine, which was based on Debian 6.0.2 "Squeeze" and kernel 2.6.38. The files played are stored on a pata (to sata) device.I suspect I have an IRQ problem, I've made the following observations:
- The following processes are producing a combined 15-20% cpu load depending on the resolution currently being played. In the Squeeze based distribution these processes are not visible, so I'm not sure what that means. irq/15-ehci_hcd irq/15-ohci_ irq/15-pata_amd_hcd - ksoftirq is also slightly elevated at 1.6 when running 'Jessie' compared to 0 on the 'Squeeze' - The si line in 'top' seems also to be quite high (between 2 and 7) compared to when running 'Squeeze' (between 0 and and occasional 0.3). - system load is also quite high
Below I have the contents of /proc/interrupts. It seems the problem lies in irq 15 being shared between usb and pata device(s). I already tried adding a few kernel options but without results: a.o. pci=routeirq, acpi=off. The latter did change the order of irq15, moving the pata device one position up.
I had a hard time finding out how to change -- get to-- the simple scan preferences. There is no batten on the screen to open preferences window. I found two way to change the preferences on simple scan.
1. Easy way: I found that when you run a program in gnome an icon of that application appears on top bar. If you click on that icon a window will appear and one of the items on that window is preferences, by clicking on that you could open preferences window, and change your preferences.
2. Hard way: Go to applications and open dconf Editor then go to org section click on it then go to gnome section click on it then go to Simple-Scan click on it now you can change things
I have upgraded my debian server on april when Jessie came up, but I *forgot* to reboot at this time. As a new kernel* was released this week as a security update, and since my server installed it (via unattended-upgrade on security packages), I rebooted it last night. It never came back online.
I have access to a rescue boot (Ubuntu 12.04 LTS), and tried to analyse the failure (by mounting /sys /dev /proc and /boot and chrooting), but without luck so far.
As it's a dedicated server, I don't have access to the console. What I know :
No log in var/log since the failed reboot. I don't know how to have/find others logs.Previous kernel was 3.2.0-4-amd64, new is 3.16.0-4-amd64, What I tried without luck) :
Change the booting kernel, via update-grub. Tried 3.2, 3.2 with sysvinit and 3.16 rescue mode I think. I should have done it right, but without console it's hard to tell.apt-get update/apt-get upgrade/apt-get dist-upgradeadding nomodeset to kernel load in grubWhat I haven't tried :
update-initramfs, I don't really know why it would block the boot
